Working with the BOOTP table
From the Work with BOOTP Table display, you can add, change, remove, or display an entry in the BOOTP table.
To work with BOOTP table, perform the following steps:
- Specify the Configure TCP/IP BOOTP (CFGTCPBP) command from the command prompt.
- Select option 2 (Work with BOOTP Table) on the Configure TCP/IP BOOTP
display to view the Work with BOOTP Table display.
You can also type WRKBPTBL.
The following display appears.
Figure 1. Work with BOOTP Table (WRKBPTBL)
display
Work with BOOTP Table
System: SYSNAM01
Type options, press Enter.
1=Add 2=Change 4=Remove 5=Display
Client
Host MAC IP
Opt Name Address Address
act01.ibm.com 02.01.8C.06.34.98 9.130.42.1