Adding statically-discovered iSCSI targets from a flat file into ODM
You can use SMIT to import a flat file's information into ODM.
- Enter smit iscsi at the AIX® command
prompt. The iSCSI screen displays.
- Select iSCSI Target Device Parameters in ODM from the iSCSI
screen. The iSCSI Target Device Parameters in ODM screen displays.
- Select Add an iSCSI Target Device in ODM from the iSCSI
screen. The Add an iSCSI Target Device in ODM screen displays.
- Select Add iSCSI Target Device Data in ODM from a File from
the iSCSI screen. The Add iSCSI Target Device Data in ODM from a File screen displays.
- Select the iSCSI adapter that you want to configure from the list.
The Add iSCSI Target Device Data in ODM from a File screen for the iSCSI adapter that you selected displays.
- Enter the appropriate information in the fields. Below is an example.
[Entry Fields] iSCSI Protocol Device iscsi3 iSCSI Group [static] + Filename of iSCSI Targets [/etc/iscsi/targetshw] +
Note: If you have a question about the purpose of a particular field, place the cursor in the field and press F1 for help.