IBM Network Color Printer

Edit online

Product specific information for the printer and queue system is provided.

The predefined files support the IBM® Network Color Printer 2.0 or higher controller code level.

Additional qprt option flags that are valid using only the Network Color Printer PS queue:
Item Descriptor
-e # Specifies brightness level.
0
Default Printer Setting
1
Lightest
2
Lighter
3
Light
4
Normal
5
Dark
6
Darker
7
Darkest
-E # Specifies the finish.
0
Default Printer Setting
1
Normal
2
Matte
3
Glossy
-k # Specifies the color model.
0
Default Printer Setting
1
CMYK
2
Grayscale
-K # Specifies the color rendering dictionary.
0
Default Printer Setting
1
Scanner
2
Highlight
3
Photographic
4
Presentation
5
Monitor
6
Solid Color
-S # Specifies the print mode.
0
Default Printer Setting
1
Photo Quality
2
Business Graphics

The following valid queue names are located on the IBM Network Color Printer:

Item Descriptor
ibmcolor_direct 1.03 or 1.1 controller code and 16MB of memory.
ibmcolor_print 1.03 or 1.1 controller code and 32MB or 48MB of memory.
ibmncp_direct 2.0 or higher controller code and 16MB of memory.
ibmncp_print 2.0 or higher controller code and 32MB or 48MB of memory.
Note: To determine the controller code level and amount of memory on your IBMNetwork Color Printer, print a configuration page from the printer operator panel. See the configuration page under "GENERAL INFO." Memory is the second item, and the third item is version of the controller code. The predefined files on AIX only supports the IBM Network Color Printer 2.0 or higher controller code level.