Enabling or disabling the keypress beep

This section describes how to enable or disable the beep that sounds when you press a key on the TS3500 tape library.

About this task

Note: Not implemented in the Tape Library Specialist Web interface.

The TS3500 tape library uses a beep to acknowledge that you pressed a touch key on the touchscreen LCD. Use the following steps to enable or disable the keypress beep:

Procedure

  1. From the library's Activity touchscreen, press MENU —> Settings —> Sounds —> ENTER.
    The Sounds screen displays with the current setting of the beep.
    Sounds                   Panel 0155

Keypress Beep is ENABLED

Disable Beep

[BACK]  [ENTER]
  2. Press ENTER to change the setting of the beep to DISABLED or ENABLED. The library displays the message You are about to set Keypress Beep Mode to x. Do you want to continue? (where x equals DISABLED or ENABLED).
  3. Press YES. The Sounds screen redisplays with the new setting.
  4. Press BACK until you return to the Activity screen.