25 Gbps Ethernet host interface adapter ports and indicators
You can install optional 2-port 25 Gbps Ethernet host interface adapters for your Storwize® V7000 Gen2+ (Storwize V7000 2076-624) system.
The system can support 2-port 25 Gbps host interface adapters that use either the RDMA over Converged Ethernet (RoCE) networking protocol or the iWARP (Internet Wide-area RDMA Protocol) networking protocol. Each host interface adapter is used for Internet Small Computer System Interface (iSCSI) connections to host systems. The ports cannot be used for system management. The Small Form-factor Pluggable (SFP) transceivers that are installed on the adapter support data transfer speeds of 25 Gbps.
25 Gbps Ethernet host interface adapter indicators
Each port on the 2-port 25 Gbps Ethernet host interface adapter has one bi-color LED that indicates the status of the link and port. The location of the LEDs varies, depending on the type of adapter.
Figure 2 shows the front of a 2-port 25 Gbps Ethernet (RoCE) host interface adapter.
The LED states and their meanings are explained in Table 1.
Color | State | Meaning |
---|---|---|
None | Off | The port is not active. |
Green | Solid | The port has a valid link with no active traffic. |
Green | Blinking | The port has a valid link with active traffic. |
Yellow | Blinking | Indicates a problem with the link. |
Figure 3 shows the 25 Gbps Ethernet (iWARP)host interface adapter. Each port has a single LED that indicates the status of the port and link.
Table 2 summarizes the possible values of the LEDs on the 25 Gbps Ethernet host interface adapter (iWARP).
Color | State | Meaning |
---|---|---|
Off | Off | The ports and links are not active. |
Green | Solid | The ports have a valid link. |