Check if the complex is operating normally
First, the installation should check to ensure that the complex
is operating normally. This is best accomplished by issuing the DISPLAY
GRS,SYSTEM command. The following examples show normal output from
these commands for both ring and star mode.
ISG343I 17.43.42 GRS STATUS FRAME 1 F E SYS=PROD2
SYSTEM STATE SYSTEM STATE
PROD1 ACTIVE PROD2 ACTIVE
TEST1 ACTIVE
Ring complex, normal response for DISPLAY GRS,SYSTEM command
ISG343I 17.43.42 GRS STATUS FRAME 1 F E SYS=PROD2
SYSTEM STATE SYSTEM STATE
PROD1 CONNECTED PROD2 CONNECTED
TEST1 CONNECTED
Star complex, normal response for DISPLAY GRS,SYSTEM command