List of base elements and optional features

The base control program (BCP) provides essential operating system services. The BCP includes the I/O configuration program (IOCP), workload management (WLM), system management facilities (SMF), z/OS UNIX System Services (z/OS UNIX) kernel, the program management binder (FMID HPM77B0), IBM Health Checker for z/OS, support for the Unicode Standard (FMID HUN77B0), z/OS XML System Services (z/OS XML), Capacity Provisioning (FMID HPV77B0), and System REXX for z/OS Base.

BookManager READ V1R3, 5695-046)

BookManager READ is used to display, search, and manage online documents and bookshelves.

Bulk Data Transfer (BDT) provides the base services that the optional BDT features (BDT File-to-File and BDT SNA NJE) need to transfer data from one computer system to another.

You cannot activate any BDT functions until one or both of the optional BDT features is enabled.

Bulk Data Transfer (BDT) File-to-File allows users at one z/OS system in a SNA network to copy data sets to or from another z/OS system in the network. This feature is related to the element BDT.

Bulk Data Transfer (BDT) SNA NJE allows JES3 users to transmit jobs, output, commands, and messages from one computer system to another within a SNA network. This feature is related to the element BDT and the feature JES3.

Common Information Model (CIM) is a standard data model for describing and accessing systems management data in heterogeneous environments. It allows system administrators to write applications that measure system resources in a network with different operating systems and hardware. To enable z/OS for cross platform management, a subset of resources and metrics of a z/OS system are mapped into the CIM standard data model.

Transport layer security (TLS) encryption is performed for CIM by base element Communications Server. CIM does not implement any of its own encryption algorithms.

Communications Server supports secure TCP/IP, SNA, and UNIX networking throughout an enterprise. It gives you the ability to connect subsystems and applications to each other, and to connect network devices (such as terminals and printers) to the system.

Communications Server consists of two components: IP Services and SNA Services. A related optional feature is Communications Server Security Level 3.

For encryption, IP Services uses the SNMPv3 DES 56-bit and IPSec DES 56-bit algorithms. IP Services also uses the System SSL component of Cryptographic Services for encryption services. SNA Services use the limited DES algorithm for encryption.

This feature works with the Communications Server base element to provide stronger encryption (greater than 64 bits) than is available without this feature. This feature uses the TDES and AES algorithms for encryption. The actual level of encryption that takes place with this feature installed can be configured to be less than the maximum level enabled by this feature.

This feature is worldwide exportable subject to US export regulations.

This feature uses System SSL, ICSF, and CPACF.

Cryptography is the transformation of data to conceal its meaning. In z/OS, the base element Cryptographic Services provides the following base cryptographic functions: data secrecy, data integrity, personal identification, digital signatures, and the management of cryptographic keys. Keys up to 56 bits are supported by this base element. Keys longer than 56 bits are supported by the optional feature z/OS Security Level 3.

DFSMSdfp provides storage, data, program, and device management functions. Related optional features are DFSMSrmm, DFSMSdss, DFSMShsm, and DFSMStvs.

DFSMSdss copies and moves data for backup and recovery, and to reduce free-space fragmentation.

DFSMShsm provides automated DASD storage management, including space management for low and inactive data, and availability management for accidental data loss caused by local and site disasters. DFSMShsm also lets you make effective use of tape media.

DFSMShsm requires DFSMSdss. For this reason, DFSMShsm is not available by itself. If you want to use DFSMShsm, you must order the DFSMShsm/DFSMSdss combination. DFSMSdss is also available by itself for those who do not want DFSMShsm.

DFSMSrmm helps you manage your removable media as one enterprise-wide library across systems that can share DASD. DFSMSrmm also has a client/server function (through TCP/IP) that enables a single enterprise-wide library without the need for shared DASD.

DFSMS Transactional VSAM Services (DFSMStvs) enables batch jobs and CICS® online transactions to update shared VSAM data sets concurrently.

DFSORT provides fast and easy sorting, merging, copying, reporting, and analysis of your business information, and versatile data handling at the record, field, and bit level. DFSORT also includes the high-performance ICEGENER facility, the versatile ICETOOL utility, symbols, and multiple output capabilities with the powerful OUTFIL feature.

The DFS and SMB support use the DES 56-bit algorithm for encryption.

(EREP MVS™ V3R5, 5658-260)

Environmental Record Editing and Printing Program (EREP) edits and prints reports for the records that are placed in the error recording data set (ERDS), which can be used by IBM Support to diagnose problems.

When your installation uses ESCON directors, the ESCON Director Device Support feature enables reporting of ESCON director device errors to z/OS.

First Failure Support Technology/MVS (FFST/MVS) provides immediate notification and first failure data capture for software events.

(GDDM/MVS V3R2, 5695-167)

GDDM provides presentation services and device-driving capability. It includes PCLK and REXX code. Related optional features are GDDM-Presentation Graphics Feature and GDDM-REXX. Other GDDM associated products (IVU, GKS, IMD) are not in z/OS, but are separately orderable with z/OS.

(GDDM/PGF V2R1.3, 5668-812)

GDDM-Presentation Graphics Feature (PGF) is a set of programs for creating presentation material in various styles. This feature is related to the base element GDDM.

(GDDM-REXX/MVS V3R2, 5664-336)

GDDM-REXX is a productivity tool that enables programmers to prototype GDDM applications and to create small routines and utility programs quickly and easily. This feature is related to the base element GDDM.

Hardware Configuration Definition (HCD) defines both the operating system configuration and the processor hardware configuration for a system. A related optional feature is HCM.

Hardware Configuration Manager (HCM) is a PWS-based client/server interface to z/OS Hardware Configuration Definition (HCD).

(High Level Assembler for z/OS, z/VM®, and z/VSE® V1R6, 5696-234)

High Level Assembler (HLASM) integrates almost all functions of past assemblers and provides extensions and improvements. A related optional feature is High Level Assembler Toolkit.

(Toolkit feature of High Level Assembler for z/OS, z/VM, and z/VSE V1R6, 5696-234)

High Level Assembler Toolkit (HLASM Toolkit) provides tools to improve application development, debugging, and recovery. It is related to the base element High Level Assembler.

IBM HTTP Server powered by Apache is the new web server for z/OS. It provides scalable, high-performance web serving for critical e-business applications. It is the strategic HTTP Server that z/OS V2R2 supports and includes security authentication and authorization capabilities similar to those provided in the Domino® HTTP Server.

The level that is incorporated in z/OS is based on Apache HTTP Server 2.4. In element publications, you might see the name IBM HTTP Server - Powered by Apache V9, which is how this level is referenced.

IBM Knowledge Center is the IBM strategic framework for providing Internet-based product documentation. IBM Knowledge Center provides enhanced search technology similar to that used for Information Centers. It also helps you create your own local repositories and tailor the content that is presented from them.

Softcopy Librarian makes it easier to manage and update content for IBM Knowledge Center for z/OS. You can download it from IBM Softcopy Librarian.

z/OS V2R3 includes a new release of IBM Knowledge Center, which includes a Knowledge Center-based replacement for the legacy LookAT facility that was used for message look-ups. You can find it here: IBM Z: Look@ Knowledge Center

IBM Tivoli Directory Server for z/OS (IBM TDS for z/OS) provides secure access for applications and systems on the network to directory information held on z/OS using the Lightweight Directory Access Protocol (LDAP). This component consists of the LDAP server, LDAP client, and utilities.

For encryption, IBM TDS for z/OS uses the DES (56 bit) and MD5 encryption algorithms.

IBM z/OS Liberty Embedded provides a copy of the IBM Liberty server stack for sharing between IBM z/OS elements.

IBM z/OS Management Facility (z/OSMF) provides a web-based interface that helps you manage various aspects of your z/OS systems through a browser at any time, from any location. By streamlining some traditional tasks and automating others, z/OSMF can help to simplify some areas of z/OS system management.

(ICKDSF , z/OS.e, and OS/390 R17, 5655-257)

ICKDSF helps you perform functions that are required for the installation and use of IBM DASD. You can also use it to perform service functions, error detection, and media maintenance.

ICKDSF was last changed in the z/OS V1R4 z990 Compatibility Support feature. This level was carried forward to the z/OS V1R4 z990 Exploitation Support feature and then to z/OS V1R5 and later, and is functionally equivalent to the R17 level of the ICKDSF product.

Infoprint Server helps you print files on z/OS printers from any workstation that has TCP/IP access.

IBM recommends that you use the Infoprint Server feature IP PrintWay component, rather than the Communications Server base element Network Print Facility (NPF) to reroute print data to an IP network. IP PrintWay provides improved function, capacity, performance, and usability over NPF.

As of z/OS V1R13, Distributed Computing Environment (DCE) and Distributed Computing Environment Security Server (DCE Security Server) are removed from the system. IBM recommends the IBM WebSphere® Application Server, the IBM Network Authentication Service, or the IBM Tivoli Directory Server as replacement strategies for each of the DCE technologies. See the Redbooks® DCE Replacement Strategies at IBM Redbooks.

JES2 accepts the submission of work for the BCP. JES2 exercises independent control over its job processing functions, whereas JES3 exercises centralized control.

z/OS V1R13 is the last release to support a staged migration for JES2 and JES3. Starting in z/OS V2R1, your installation must migrate to all elements of z/OS at the same time, including JES2, JES3, or both.

JES3 accepts the submission of work for the BCP. JES3 exercises centralized control over its job processing functions, whereas JES2 exercises independent control.

z/OS V1R13 is the last release to support a staged migration for JES2 and JES3. Starting in z/OS V2R1, your installation must migrate to all elements of z/OS at the same time, including JES2, JES3, or both.

Language Environment provides the runtime environment for programs that are generated with C, C++, COBOL, Fortran, and PL/I.

Inclusion of Language Environment as a base element in z/OS does not replace the need for separate compilers.

Language Environment uses the limited DES algorithm for encryption.

Library Server converts BookManager and Information Center documents to HTML for display through a web browser, and provides unified organization and searching of BookManager, PDF, and Information Center documents.

The Metal C Runtime Library is a set of LPA-resident C functions that can be called from a C program that is created by using the z/OS XL C compiler METAL option.

MICR/OCR provides the device support code for various magnetic and optical devices.

Network File System (NFS) is a distributed file system protocol that allows a user on a client computer to access files on a server over a network, much like local storage is accessed. Both the client and server use z/OS UNIX System Services sockets.

NFS uses the Network Authentication Service component of Integrated Security Services for encryption.

Open Systems Adapter/Support Facility (OSA/SF) provides a user-friendly interface for monitoring and controlling the zSeries Open Systems Adapter feature, which provides network connectivity directly to local area networks (LANs) and wide area networks (WANs) that support IP and SNA protocols. OSA/SF supports Gigabit, Token Ring, Fast Ethernet, 1000Base-T Ethernet, 10-Gigabit Ethernet, and ATM features depending on the server on which z/OS runs. For more information, see z Systems OSA-Express Customer's Guide and Reference, SA22-7935.

Resource Measurement Facility (RMF) gathers data about z/OS resource usage and performance, and provides reports on any system in a sysplex.

For installations that cannot eliminate user key (8-15) common storage usage, the restricted use common service area (RUCSA) provides a means of isolating user key common storage to specific users and thus, controlling or eliminating the security risk that is associated with common user key storage.

For more information, see z/OS MVS Initialization and Tuning Guide.

System Display and Search Facility (SDSF) provides you with information to monitor, manage, and control your z/OS system.

z/OS V1R13 is the last release to support a staged migration for SDSF. Starting in z/OS V2R1, your installation must migrate to all elements of z/OS at the same time, including SDSF.

Security Server helps you control access to protected resources. Security Server contains one component, RACF®.

Security Server uses the limited DES, CDMF, RC 40-bit, RSA, and DSA algorithms for encryption.

(SMP/E V3R6, 5655-G44)

SMP/E is a tool for installing and maintaining software, and for managing the inventory of installed software. SMP/E provides a consistent and reliable method for installing and upgrading the software in a z/OS system.

The SMP/E product allows installations that are currently licensed for an earlier level of z/OS to order and install the latest level of SMP/E without having to upgrade the operating system. This capability allows products that run on z/OS to exploit the packaging and installation enhancements of SMP/E without requiring a later level of the operating system. This capability also enables z/OS installations to exploit new electronic delivery and installation technologies in SMP/E sooner. The SMP/E product is available at no additional charge to z/OS installations.

The Planning and Migration Assistant (PMA), a component of SMP/E, can help you maintain, plan for, and order new releases of z/OS and other products. It provides reports that use IBM-supplied data, your SMP/E consolidated software inventory (CSI) data set, and a CustomPac inventory file. The PMA can be found on the SMP/E home page.

Terminal Input Output Controller (TIOC) is the interface between TSO and VTAM®. It allows TSO to communicate with the terminal hardware.

Time Sharing Option/Extensions (TSO/E) provides an interactive terminal interface. As in prior releases of TSO/E, this element includes CLISTs and REXX, but does not include a REXX compiler.

From a z/OS standpoint, this element owns the parts that use SMP/E SUP/DELETE logic; therefore, you no longer need to order the previous stand-alone products, as of z/OS V2R1.

z/OS OpenSSH is a port of Open Source Software release OpenSSH 6.4p1 and provides secure encryption for both remote login and file transfer.

Other basic utilities such as ssh-add, ssh-agent, ssh-keysign, ssh-keyscan, ssh-keygen, and sftp-server are also included.

z/OS Security Level 3 provides strong encryption for z/OS.

This feature is worldwide exportable subject to U.S. export regulations.

z/OS UNIX System Services (z/OS UNIX) provides the standard command interface familiar to interactive UNIX users. This base element is made up of Application Services, which includes the Shell and Utilities, Debugger, and Parallel Environment.

Integrated Call Level Interface (ICLI), which was last changed in z/OS V1R6, was removed from the z/OS V2R1 system.

zEDC for z/OS provides exploitation of the zEC12 and zBC12 zEDC Express® adapter for hardware data compression.

(3270 PC File Transfer Program V1R1.1, 5665-311)

3270 PC File Transfer Program transfers files from the host to the workstation for offline data manipulation, updating, or correction or for the transfer and storage of local data in the host system.