IOEZnnnnnt: zFS messages

IOEZ00001E
zFS I/O error error occurred for aggregate aggregate
IOEZ00002E
MMRE error id=id cis=count if=inflags of=outflags buf=buffer CI=ci
IOEZ00003E
While opening minor device minor_number, could not open dataset dataset_name.
IOEZ00004I
Formatting to 8K block number blocks for primary extent of dataset_name.
IOEZ00005I
Primary extent loaded successfully for dataset_name.
IOEZ00006E
Error ErrorCode occurred while loading dataset 'dataset_name'.
IOEZ00007A
zFS kernel unable to set up to receive Operator commands.
IOEZ00008E
ProgName: Unable to open debug parameter dataset 'ParmFile'.
IOEZ00009I
ProgName: Using default values for zFS debug parameters.
IOEZ00010A
ProgName: Incorrect parameter record 'BadRecord' is ignored.
IOEZ00011A
ProgName: Operand must be numeric (BadArg).
IOEZ00012A
ProgName: BadArg exceeds maximum value MaxValue.
IOEZ00013A
ProgName: Operand must be string (BadArg).
IOEZ00014A
ProgName: BadArg exceeds max string length Maxlen.
IOEZ00015A
ProgName: Partition start list 'BadArg' not delimited by parentheses.
IOEZ00016I
ProgName: Modify complete for Parameter Value.
IOEZ00017A
ProgName: Incorrect parameter debug record BadRecord in dataset dataset_name.
IOEZ00018A
ProgName: Incorrect parameter BadParameter.
IOEZ00019E
ProgName: Parameter Parameter is not valid for modify command CommandName.
IOEZ00020I
progname: prodname featurename Version ver.rel.mod Service Level slv. Created on date.
IOEZ00023E
ProgName: modify command is not valid - Parm.
IOEZ00024E
ProgName: MODIFY command - Parm failed.
IOEZ00025I
ProgName: MODIFY command - Parm completed successfully.
IOEZ00032I
ProgramName: in-memory trace table has been reset
IOEZ00033E
ProgramName: could not open trace output dataset
IOEZ00034I
ProgramName: printing contents of trace to dataset <DatasetName>
IOEZ00035I
No trace table to print
IOEZ00036I
Printing contents of table at address Address name: Name
IOEZ00037I
Trace table is already being printed
IOEZ00038E
Incorrect record length Reclen found while printing trace table.
IOEZ00039E
Mismatched record length SReclen,,EReclen found while printing trace table.
IOEZ00040E
A bad record was found while printing trace table.
IOEZ00041I
No start record, trace wrapped, total records Records, Bytes bytes to format.
IOEZ00042I
Start record found, total records Records, Bytes bytes to format.
IOEZ00043I
ProgramName: print of in-memory trace table has completed.
IOEZ00044I
Aggregate Name attached successfully.
IOEZ00045I
Could not attach aggregate Name because its already attached
IOEZ00046E
Error ErrorCode received while attaching aggregate Name
IOEZ00048I
Detaching aggregate Name
IOEZ00050I
ProgramName: Stop command received.
IOEZ00051I
An error occurred in program IOEFSKN.
IOEZ00052I
progname: Initializing prodname featurename Version ver.rel.mod Service Level slv. Created on date.
IOEZ00053E
Error setting up termination thread, code = ErrorCode.
IOEZ00054E
Error starting console thread, code = ErrorCode.
IOEZ00055I
zFS kernel: initialization complete.
IOEZ00057I
zFS kernel program IOEFSKN is ending.
IOEZ00062A
zFS kernel: could not create admin thread, code ErrorCode.
IOEZ00064I
General Registers RRegNumber: Reg1 Reg2 Reg3 Reg4
IOEZ00068E
zFS file system Name exceeds Threshold% full (blocks1/blocks2) (WARNING)
IOEZ00069I
zFS file system Name is now below Threshold% full (blocks1/blocks2)
IOEZ00070E
Incorrect value Perms for permissions
IOEZ00077I
HFS-compatibility aggregate Name has been successfully created
IOEZ00078E
zFS aggregate Name exceeds Threshold% full (blocks1/blocks2) (WARNING)
IOEZ00079I
zFS aggregate Name is now below Threshold% full (blocks1/blocks2)
IOEZ00080A
Signal Signal received, dump in progress.
IOEZ00081A
zFS: PSW from Machine State: psw1 psw2 Abend Code from CIB: abend Reason Code from CIB: reason Load Module Name: module
IOEZ00082A
Immediate end of processing requested: message_string.
IOEZ00083A
Assertion Failed:Assertion Line:LineNo File:FileName.
IOEZ00084E
Syntax error string String on line(s) StartLine:EndLine in configuration dataset FileName
IOEZ00085E
Error ErrorCode received opening configuration dataset Dsname
IOEZ00087I
The parameter, Parameter1, requires String non-null argument value.
IOEZ00088I
The argument, Argument, does not represent a valid value for the parameter Parameter.
IOEZ00092E
The user is not authorized to run this command.
IOEZ00093E
Incorrect value Owner for owner
IOEZ00094E
Incorrect value Group for group
IOEZ00095E
Incorrect value Perms for permissions
IOEZ00096E
Incorrect value Size for size
IOEZ00100E
File system Name was not found
IOEZ00105I
File system Name deleted successfully
IOEZ00106I
A total of Count aggregates are attached
IOEZ00109E
Could not retrieve parameter dataset name from zFS kernel
IOEZ00110E
Could not read the zFS parameter dataset
IOEZ00112E
Must specify at least -all or -aggregate options
IOEZ00117I
Aggregate Name attached successfully
IOEZ00118I
Aggregate Name is already attached
IOEZ00119E
Aggregate Name could not be attached, error code=ErrorCode reason code=ReasonCode
IOEZ00120E
Syntax error with aggregate full parameter - Parameter
IOEZ00122I
Aggregate Name detached successfully
IOEZ00123I
Could not detach aggregate Name because it was not attached
IOEZ00124E
Error detaching aggregate Name, error code=ErrorCode reason code=ReasonCode
IOEZ00127I
No file systems found for aggregate Name
IOEZ00129I
Total of Total file systems found for aggregate Name
IOEZ00131E
File system name filesys_name too long; must be less than bad_number chars.
IOEZ00132E
Incorrect file system name filesys_name; should not be a number.
IOEZ00133E
program_name: Number (bad_number) is too large. Specify a smaller number.
IOEZ00134E
Incorrect file system name filesys_name; cannot end in .bak
IOEZ00135E
Aggregate Name was not found
IOEZ00136E
File system filesys_id_hi,,filesys_id_low is busy: error_text.
IOEZ00138E
Open error on file(dsname), errno(errno).
IOEZ00139E
read error on file(dsname), errno(errno).
IOEZ00140I
Using default message table which is in English.
IOEZ00141E
Insufficent storage available.
IOEZ00142E
Message control block is NULL, Cannot print message ID(xmsgid).
IOEZ00143E
Unable to retrieve message text for message ID(xmsgid).
IOEZ00144E
Unknown message.
IOEZ00157E
Open of message output dataset (dsname) failed.
IOEZ00158E
Write to message output dataset (dsname) failed.
IOEZ00159E
No output dataset defined by output_message_dataset.
IOEZ00163I
Aggregate Name successfully quiesced
IOEZ00164I
Could not quiesce aggregate Name because it was not attached
IOEZ00165E
Error ErrorCode reason code ReasonCode received quiescing aggregate Name
IOEZ00166I
Aggregate Name successfully unquiesced
IOEZ00167I
Could not unquiesce aggregate Name because it was not attached
IOEZ00168E
Error ErrorCode reason code ReasonCode received unquiescing aggregate Name
IOEZ00170E
Open of file system FilesystemName failed with rc ReturnCode
IOEZ00171I
Close of file system FilesystemName failed with rc ReturnCode
IOEZ00173I
Aggregate Name successfully grown
IOEZ00175E
Error growing aggregate Name, error code=ErrorCode reason code=ReasonCode
IOEZ00178I
Filename is the configuration dataset currently in use.
IOEZ00179I
There is no configuration dataset. Default configuration values will be used.
IOEZ00181E
Could not open trace output dataset
IOEZ00182E
Could not write to trace output dataset
IOEZ00183E
File system FileSystem is busy
IOEZ00184E
Duplicate file system FileSystem found on aggregate AggrName, already attached on aggregate PrevAggrName
IOEZ00185E
DASD volser Volser is offline, aggregate AggrName cannot be attached
IOEZ00186E
Error ErrorCode reason ReasonCode encountered obtaining status on volser Volser for aggregate AggrName, macro MacroName
IOEZ00187I
Access Registers AR RegNumber Reg1 Reg2 Reg3 Reg4
IOEZ00188A
zFS kernel out of storage, total of TotalBytesM bytes used, size attempted was Size, class class, type type
IOEZ00190E
File system FileSystem is mounted, operation cannot be performed
IOEZ00191E
Error deleting file system FileSystem, error code ErrorCode reason code ReasonCode
IOEZ00199E
Aggregate Name cannot be detached because it is quiesced
IOEZ00200E
Error ErrorCode occurred while closing dataset 'dataset_name'.
IOEZ00201E
Aggregate Name cannot be detached because it contains a file system which is mounted
IOEZ00202E
Aggregate Name cannot be grown because it is attached read-only
IOEZ00207E
Aggregate Aggrname was not found
IOEZ00208E
The aggregate name Aggrname is too long. The maximum length for an aggregate name is length.
IOEZ00209E
Error ErrorCode (reason ReasonCode) occurred while attempting to get a list of all attached aggregates.
IOEZ00210E
Error ErrorCode (reason ReasonCode) occurred while attempting to get status for aggregate Aggrname
IOEZ00211E
Unable to allocate ByteCount bytes of storage for a file system list
IOEZ00212E
Error ErrorCode (reason ReasonCode) occurred while attempting to get a list of file systems for the aggregate Aggrname.
IOEZ00213E
Error ErrorCode (reason ReasonCode) occurred while attempting to get status for file system Filesystem in aggregate Aggrname
IOEZ00214E
The file system name Filesystem is too long. The maximum length for a file system name is length.
IOEZ00229I
ProgramName Commands are:
IOEZ00230I
ProgramName Unknown topic 'SubCommand'.
IOEZ00231I
ProgramName Ambiguous topic 'SubCommand'; use 'apropos' to list.
IOEZ00232I
ProgramName: Type 'ProgramName -help' for help.
IOEZ00233I
ProgramName: Type 'ProgramName help' or 'ProgramName help -topic <command_name...>' for help.
IOEZ00234I
UnkownAmbig operation 'SubCommand'; type 'ProgramName help' for list.
IOEZ00235I
UnkownAmbig operation 'SubCommand'; type 'ProgramName help' for list.
IOEZ00236I
'ProgramName -help'
IOEZ00237I
'ProgramName SubCommand -help'
IOEZ00238I
ProgramName Too many arguments.
IOEZ00239E
ProgramName Too many values after parameter Parameter
IOEZ00240E
ProgramName Missing required parameter 'Parameter'.
IOEZ00241I
ProgramNameAmbigUnk switch 'Switch'; type the following for detailed help
IOEZ00242I
The parameters "Parameter1" and "Parameter2" cannot be used together.
IOEZ00243I
Usage: ProgramNameSubCommand
IOEZ00244E
StringType String is longer than the maximum length of MaxLength
IOEZ00245E
More than MaxValues values are specified for parameter Parm. At most MaxValues values are allowed.
IOEZ00246E
The value Value of the Parm parameter is not numeric or is greater than 4294967295.
IOEZ00247E
The ParmList parameters are mutually exclusive. Both Parm1 and Parm2 have been specified. Only one may be specified.
IOEZ00248I
VSAM linear dataset Dataset successfully created.
IOEZ00249E
There were problems creating VSAM linear dataset Dataset. Code = ErrorCode, reason = ReasonCode. More messages may follow.
IOEZ00250E
The primary space specification Primary is invalid. A number greater then 0 is required.
IOEZ00251E
Insufficient memory to call IDCAMS.
IOEZ00252E
Aggregate name 'aggrname' contains invalid characters. Operation terminated.
IOEZ00253E
File system name 'Filesystem' contains invalid characters. Operation terminated.
IOEZ00300I
Successfully set Option to Value
IOEZ00301E
Could not set Option to Value, error code ErrorCode, reason code ReasonCode
IOEZ00303E
Error ErrorCode reason ReasonCode while attempting to extend the CacheName cache dataspace
IOEZ00304E
Error ErrorCode reason ReasonCode while attempting to create the CacheName cache dataspace
IOEZ00308E
Aggregate aggrname failed dynamic grow, (by user userid).
IOEZ00309I
Aggregate aggrname successfully dynamically grown (by user username).
IOEZ00312I
Dynamic growth of aggregate aggrname in progress, (by user username).
IOEZ00314E
The file system name filesystem is not unique. Its aggregate name must be specified.
IOEZ00315I
There are now Number file systems with the name Filesystem in use.
IOEZ00317I
The value for configuration option ConfigOption is ConfigValue.
IOEZ00318I
Attempting to add file system filesystem whose name is already in use.
IOEZ00320I
No options have been specified.
IOEZ00321E
Could not get value for Option, error code ErrorCode reason code ReasonCode
IOEZ00322E
The file system name filesystemname contains invalid characters and cannot be used.
IOEZ00323I
Attempting to extend dataset_name to Size 8K blocks.
IOEZ00324I
Formatting to 8K block number Size for secondary extents of dataset_name
IOEZ00325E
Error Error formatting secondary extents for dataset_name
IOEZ00326E
Error Error extending dataset_name
IOEZ00327I
Done. dataset_name is now a zFS aggregate.
IOEZ00328E
Errors encountered making dataset_name a zFS aggregate.
IOEZ00329I
Attempting to extend dataset_name by a secondary extent.
IOEZ00331A
File system name PFSName is invalid, must be ZFS
IOEZ00334I
Return code and reason code for dump is RSNcodeRC
IOEZ00336I
AggrName could not be marked as a zFS aggregate in the catalog, rc=ReturnCode rsn=ReasonCode
IOEZ00337E
zFS kernel: non-terminating exception AbendCode occurred, reason ReasonCode abend psw PSW1 PSW2
IOEZ00338A
zFS kernel: restarting exception AbendCode occurred, reason ReasonCode abend psw PSW1 PSW2
IOEZ00340E
Potential zFS hang detected. Taking informational dump...
IOEZ00341E
zfsadm query OptionName failed, rc = ReturnCode, reason = ReasonCode.
IOEZ00342I
Aggregate is attached. Cannot format.
IOEZ00350I
Successfully joined group GroupName
IOEZ00351E
Invalid message, command code code received from system SysName
IOEZ00353E
Error ErrorCode reason ReasonCode received from system SysName during OpName for AggrName_FileSysName
IOEZ00354E
Sysplex request ServiceRequested failed with return code ReturnCode and reason code ReasonCode.
IOEZ00356E
Failed joining group GroupName as member MemberName, return code ReturnCode reason code ReasonCode.
IOEZ00357I
Successfully left the sysplex group.
IOEZ00358E
The attempt to create the DaemonName daemon failed with return code ReturnCode.
IOEZ00359E
Error ErrorCode (reason ReasonCode) occurred while attempting to get a list of all systems in the XCF group for zFS
IOEZ00360I
There are no systems in the XCF group for zFS
IOEZ00361I
A total of count systems are in the XCF group for zFS
IOEZ00362E
The system name SysName is too long
IOEZ00363E
The system name SysName is not known.
IOEZ00366E
Error Operation to system System, return code ReturnCode, reason code ReasonCode.
IOEZ00368I
A total of Count aggregates are attached to system SysName.
IOEZ00369I
A total of AggrCount aggregates are attached to the sysplex.
IOEZ00370I
A total of AggrCount aggregates are attached.
IOEZ00371E
Insufficient memory to allocate NumBytes bytes.
IOEZ00373E
Error ReturnCode, reason ReasonCode received opening parmlib.
IOEZ00374I
No IOEZPRM DD specified in ZFS proc. Parmlib search being used.
IOEZ00380E
Specified vnode cache size Config_vnode_size is invalid. Using value vnode_size.
IOEZ00381E
Error ErrorCode reason ReasonCode received while attempting to move aggregate AggrName to system System
IOEZ00382I
Aggregate AggrName is now owned by system System
IOEZ00383E
Unrecoverable error encountered for inode Inode uniquifier Uniquifier in filesystem FileSetName
IOEZ00385E
Sysplex sharing error encountered for aggregate AggrName
IOEZ00387I
System SysName has left group GroupName, aggregate recovery in progress.
IOEZ00388I
Aggregate takeover being attempted for aggregate AggrName
IOEZ00389I
Error ErrorCode reason ReasonCode occurred while attempting takeover of AggrName
IOEZ00390I
recovery statistics:
IOEZ00391I
Elapsed time was time ms
IOEZ00392I
NumPages log pages recovered consisting of NumRecords records
IOEZ00393I
Modified NumBlocks data blocks
IOEZ00394I
NumDataRecords redo-data records, NumFillRecords redo-fill records
IOEZ00395I
NumDataRecords undo-data records, NumFillRecords undo-fill records
IOEZ00396I
NumBlocks not written blocks
IOEZ00397I
recovery statistics for AggrName:
IOEZ00398E
Specified vnode cache size Config_vnode_size is greater than the vnode cache limit. Using value vnode_size.
IOEZ00400I
NumBlocks blocks zeroed
IOEZ00401I
No report option specified to be reset.
IOEZ00405I
ProgrameName Option Option has been processed. This specification is ignored.
IOEZ00410I
Shareoptions for aggregate AggrName altered. New value is (3,3).
IOEZ00411I
Alter for shareoptions failed for aggregate AggrName.
IOEZ00412I
Catalog search failed for aggregate AggrName. Shareoptions are not altered.
IOEZ00413I
IGGCSI00 could not be loaded. Shareoptions for aggregate AggrName are not altered.
IOEZ00416I
Aggregate AggrName moved to system SystemName at shutdown.
IOEZ00417E
Error ErrorCode reason ReasonCode received moving aggregate AggrName to SystemName at shutdown.
IOEZ00418I
Error associating mount name mountname to sysname.
IOEZ00420E
Syntax error string String on line(s) StartLine:EndLine in parmlib member StartParmlibSuffix:EndParmlibSuffix.
IOEZ00421E
Insufficient memory to allocate NumBytes bytes.
IOEZ00422E
Aggregate Aggrname disabled
IOEZ00424E
Internal lock error, aggregate AggrName must be detached and the format restarted
IOEZ00425E
UNQUIESCE FAILURE: rc = ReturnCode rsn = ReasonCode
IOEZ00426E
UNQUIESCE FAILURE: too many input parameters.
IOEZ00433E
Internal error, aggregate AggrName cannot be detached from zFS
IOEZ00434E
Error creating zFS kernel trace, error code=ErrorCode reason code=ReasonCode
IOEZ00435E
Error aborting the zFS kernel, error code=ErrorCode reason code=ReasonCode
IOEZ00436E
Disabling IO to DASD volume VolumeName
IOEZ00437I
IO to DASD volume VolumeName has been enabled
IOEZ00438I
Starting Query Command QueryName
IOEZ00439I
Read-only aggregate AggrName is attached read-write on another system.
IOEZ00440E
Internal error found while processing read-only aggregate AggrName.
IOEZ00441E
Operation failed for aggregate AggrName. ZFS does not support striped data sets.
IOEZ00442E
Operation failed. ZFS does not support striped data sets.
IOEZ00443E
Message output dataset (dsname) has lrecl too small.
IOEZ00444E
Could not write to trace output dataset - lrecl too small
IOEZ00445E
Error extending AggrName. DFSMS return code = DFSMScode, PDF code = PDFcode.
IOEZ00447E
System SystemName went down or did not reply to OperationName for Name
IOEZ00451E
Error in allow striped, error code=ErrorCode reason code=ReasonCode
IOEZ00453I
Processing xcf trace message from system SystemName
IOEZ00500I
Converting AggrName for fast mount processing
IOEZ00501E
Internal error converting bitmap file in AggrName for fast mount
IOEZ00502E
Internal error salvaging bitmap, could not get status, code=ErrorCode
IOEZ00503E
Bitmap computed blocksFree=CompBlocks fragsFree= CompFrags, on disk blocksFree=NumBlocks, fragsFree=NumFrags
IOEZ00504E
Internal error salvaging bitmap, could not set status, code=ErrorCode
IOEZ00505I
Corrected free space information, blocksFree=NumBlocks fragsFree=NumFrags
IOEZ00506E
FILESYSTYPE PARM too long, length = length
IOEZ00507E
Error in FILESYSTYPE PARM specification string
IOEZ00508E
Suffix at position position too long
IOEZ00509E
Comma or right paren expected at position position
IOEZ00510E
Suffix at position position not two alphanumeric chars
IOEZ00511E
No suffixes found at position position
IOEZ00512E
No closing paren found at position position
IOEZ00513E
No open paren found at position position
IOEZ00514E
No equals sign found at position position
IOEZ00515E
Extra characters were found at position position
IOEZ00516E
PRM not found at position position
IOEZ00517E
zFS is not starting in its own address space. zFS terminating.
IOEZ00518I
Converting filesystem FileSystem to allow for fast mount
IOEZ00519E
Error ErrorCode converting filesystem FileSystem
IOEZ00520E
Error ErrorCode salvaging filesystem FileSystem
IOEZ00521I
Salvaging filesystem FileSystem free space control information
IOEZ00522E
Filesystem FileSystem is not in a compat aggregate. It cannot be mounted
IOEZ00523I
zFS no longer supports the stop command. Please issue f omvs,stoppfs=zfs
IOEZ00524I
zFS has a potentially hanging thread caused by: UserList.
IOEZ00536E
First block of FirstBlock (block size BlockSize) starts the file system at byte FirstBlock * BlockSize, which is after the canonical superblock address of SuperAddr.
IOEZ00537E
Log has bad checksum length
IOEZ00538I
Log has unknown checksum type on disk. Ignoring checksum check
IOEZ00539E
Unable to retrieve checksum in log page
IOEZ00540I
Log is using unknown checksum version CurrentVersion, Changing to use version NewVersion
IOEZ00545E
A conversion of aggregate AggrName to version 3 is not complete. The conversion must be complete before the aggregate is usable.
IOEZ00547I
zFS has a potentially hanging XCF request on systems:Systemnames.
IOEZ00548I
Requesting that MemberName takeover aggregate AggrName (requests: local LocalReqs, new owner NewOwnerReqs total TotalReqs)
IOEZ00549E
Media Manager return code ErrorCode for aggregate Aggr_name.
IOEZ00550E
zFS I/O timed out for aggregate aggregate name.
IOEZ00551E
Aggregate AggrName ran out of space.
IOEZ00553E
Unable to format. Aggregate is attached.
IOEZ00555E
-system cannot be specified without -all
IOEZ00557E
zfsadm command failed, rc = ReturnCode, reason = ReasonCode.
IOEZ00558E
An internal error occurred waiting for retry of a user task dump for asid.
IOEZ00559I
progname: Initializing prodname featurename Version ver.rel.mod Service Level slv. Created on date. Address space asid
IOEZ00576E
SystemName is not at the minimum acceptable service level of ServiceLevel. Returning error.
IOEZ00579I
Restarting Program, Restart count Count
IOEZ00581E
There are quiesced zFS aggregates.
IOEZ00587I
zFS Release level cannot change during a recycle, zFS must terminate.
IOEZ00589E
Aggregate Aggrname failed to reopen. Membername cannot become the zFS owner of this aggregate.
IOEZ00590E
Aggregate Aggrname was successfully reopened. Membername is now eligible to become a zFS owner.
IOEZ00591I
zFS is encountering delays in XCF message transmission to systems: Systemnames
IOEZ00592I
zFS is encountering delays with XCF replies from systems: Systemnames
IOEZ00598E
ErrorCode reason ReasonCode received formatting aggregate AggrName.
IOEZ00599E
ErrorCode during TSR for aggregate Name.
IOEZ00604I
Task asid=Asid tcb=TCB is delayed outside zFS while Action_object.
IOEZ00605I
Task asid=Asid tcb=TCB has encountered delays in processing.
IOEZ00606E
Error ErrorCode reason ReasonCode received while attempting to setauditfid for aggregate AggrName.
IOEZ00607I
Auditfid set for aggregate AggrName.
IOEZ00608I
Aggregate AggrName has new format auditfid. Specify -force or -old to override.
IOEZ00609I
Parameter parm is too long.
IOEZ00610I
zFS Name Space Validation could not obtain ENQ on ResName, waiting Seconds seconds
IOEZ00611I
zFS Name Space Validation could not ping system SysName, waiting Seconds seconds.
IOEZ00612I
zFS Name Space Validation is running due to a detected internal error
IOEZ00613I
zFS Name Space Validation is running due to a detected XCF communication failure or message timeout.
IOEZ00614A
zFS has detected an incompatible interface level IntLevel for member Sysname.
IOEZ00615E
zFS encountered error Rcode reason=RsnCode obtaining GRS serialization for aggregate Aggregate
IOEZ00616E
A timeout has occurred attempting to establish a connection with system Target_system
IOEZ00617I
zFS is running sysplex SysLevel with interface level IntLevel
IOEZ00618E
SY1 owns the long term enq for aggregate Aggrname or is the owner as defined by the first entry found. System SY2 thinks SY3 owns the aggregate.
IOEZ00619E
Aggregate Aggrname is unowned. System SY1 thinks SY2 owns the aggregate.
IOEZ00620E
SY1 is the owner of RW aggregate Aggrname and is not sysplex aware for RW. There is another cache entry for this aggregate on system SY2
IOEZ00621E
There is only one cache entry for aggregate Aggrname on system System but this entry indicates there are other systems connected.
IOEZ00622E
There is only one cache entry for aggregate Aggrname on system SY1 but this entry indicates that this system is connected to another system.
IOEZ00623E
Aggregate Aggrname is unowned and growing on system System.
IOEZ00624E
Aggregate Aggrname is on system SY1 with flags Flag1 and also on system SY2 with flags Flag2.
IOEZ00625E
Aggregate Aggrname is on system System1 with Field1 Currstate1 and also on system System2 with Field2 Curstate2.
IOEZ00626E
Aggregate Aggrname is on system System1 with Field1val1,,val2 and also on system System2 with Field2 val3,,val4.
IOEZ00627E
AggregateAggrname on system System is unowned but its cache entry indicates other systems are connected.
IOEZ00628E
Aggregate Aggrname is unowned, but system System has a cache entry indicating a connection to an owning system.
IOEZ00629E
The owner SY1 of aggregate Aggrname thinks client SY2 is status to the fstype file system but the connect flag on system SY3 is state.
IOEZ00630E
The owner SY1 of aggregate Aggrname thinks client SY2 is not connected, but the client has a cache entry
IOEZ00631E
The client SY1 of aggregate Aggrname thinks it is not connected, yet it has a cache entry.
IOEZ00632E
The owner SY1 of aggregate Aggrname thinks client SY2 is not connected to the fstype filesystem, but the client thinks otherwise.
IOEZ00633E
The client SY1 of aggregate Aggrname thinks it is not connected to the fstype filesystem, but the owner thinks otherwise.
IOEZ00634E
The owner SY1 of aggregate Aggrname thinks system SY2 is connected but it does not have a cache entry.
IOEZ00635E
System SY1 owns aggregate Aggrname but does not have a cache entry for it
IOEZ00636E
System SY1 owns aggregate Aggrname but its cache entry says the aggregate is owned by SY2
IOEZ00639I
progname: prodname featurenameVersion ver.rel.mod Service Level slv. Created on date. syslevel
IOEZ00640E
Failed sending the msgname initialization message to system sysname. Please restart.
IOEZ00641I
Cannot attach aggregate Aggrname in R/O mode due to incomplete clone.
IOEZ00642E
Mounting filesystem filesystemname is delayed, SMS is not active.
IOEZ00643I
The value for configuration option ConfigOption is: Progname: Prodname Featurename Version Version Service Level SLV Created on Date
IOEZ00644I
The value for configuration option ConfigOption is: Progname: Prodname Featurename Version Version Service Level SLV Created on Date Syslevel
IOEZ00645I
Error code initializing the zFS kernel control program.
IOEZ00646I
zFS Kernel is restarting numfilesys file systems.
IOEZ00658E
Timeout exceeded for Operation operation. A reply was not received from system System.
IOEZ00659E
Timeout exceeded for the Operation operation on Name. A reply was not received from system System operation.
IOEZ00660I
There is Numtasks task(s) delayed outside zFS while Action_object
IOEZ00661I
zFS has a slow running XCF request on systems: Systemnames
IOEZ00662I
ZFS is low on storage
IOEZ00663I
ZFS is critically low on storage
IOEZ00664E
Space monitoring initialization for Name has failed
IOEZ00665E
Restarting local system Sysname for correction.
IOEZ00666E
zFS kernel will be restarted automatically for a correction request from Sysname.
IOEZ00667I
ZFS suppressing a dump for an error condition.
IOEZ00668I
zFS Configuration option configoption is obsolete and is not used.
IOEZ00674E
zFS failed to obtain critical ENQ on resource ResName. Rc and rsn are rc and rsn. zFS terminating.
IOEZ00675E
zFS will terminate... system Sysname1 does not support the following feature(s) used by this system (Sysname2) feature_list.
IOEZ00676E
zFS on Sysname1 should be terminated... it does not support the following feature(s) used by this system (Sysname2) feature_list.
IOEZ00677E
zFS will terminate... system Sysname1 uses feature(s) not supported by the initializing system (Sysname2).
IOEZ00700E
Aggregate aggregate_name is disabled for writing.
IOEZ00701E
Could not read 8K page block_number from aggregate aggregate_name
IOEZ00702E
Errors encountered verifying AFL on aggregate aggregate_name
IOEZ00703E
Corruption: description
IOEZ00704E
Expected: text
IOEZ00705I
Formatted vversion size aggregate_size 8K blocks, dataset size data_set_size 8K blocks
IOEZ00707I
Log file size number_blocks 8K blocks, verified correct
IOEZ00708E
Log file on aggregate aggregate_name is corrupted.
IOEZ00709I
Bitmap size number_blocks 8K blocks, verified correct
IOEZ00710E
Bitmap on aggregate aggregate_name is corrupted.
IOEZ00718I
ZFS is low on recovery tasks
IOEZ00719I
ZFS is critically low on recovery tasks
IOEZ00720I
Initializing system SysName will not be allowed to join the sysplex. It is not running sysplex=filesys.
IOEZ00721I
Sysplex member SysName is not running sysplex=filesys. zFS on this initializing member will terminate.
IOEZ00722I
Primary file system size size 8K blocks, verified correct
IOEZ00723E
Primary file system on aggregate aggregate_name is corrupted.
IOEZ00724I
Could not automatically re-enable disabled aggregate AggrName.
IOEZ00725I
Automatic re-enablement of file system FileSys complete.
IOEZ00726I
Waiting for recovery of number in-progress operations for filesystem FilesystemName
IOEZ00727I
Pre-processing Numvnodes vnodes for file system restart
IOEZ00728I
Resuming user operations for file system FileSys Waking NumTasks waiting tasks Recached Numvnodes vnodes for this file system
IOEZ00729I
Verification of aggregate aggregate_name started
IOEZ00730I
Verification of aggregate aggregate_name completed, no errors found.
IOEZ00731I
zFS internal restart complete.
IOEZ00733I
Verification of aggregate aggregate_name completed and the aggregate is in error
IOEZ00734E
Verification of aggregate aggregate-name stopped with return code ReturnCode due to major error(s)
IOEZ00735I
Salvage found number minor errors in aggregate aggregate_name
IOEZ00736I
zFS kernel initiated at StartTime Current status: Status Internal restart count RestartCount RestartTime
IOEZ00739I
Salvage processed d_pages directory pages, anodes anodes, i_blocks indirect blocks and a_pages anode table pages.
IOEZ00740E
Internal remount of file system FileSys failed
IOEZ00741I
zFS is currently running at sysplex=filesys. You have specified sysplex=on. You should change your zFS configuration options file specification to sysplex=filesys and also specify sysplex_filesys_sharemode=rwshare.
IOEZ00742I
zFS is currently running at sysplex=filesys. You have specified sysplex=off. You should change your zFS configuration options file specification to sysplex=filesys.
IOEZ00743I
zFS is currently running at sysplex=filesys. You have not specified sysplex=filesys. You should change your zFS configuration options file specification to sysplex=filesys.
IOEZ00744E
Time limit exceeded for recovery of in-progress operations for filesystem FileSys
IOEZ00745E
Automatic re-enablement of file system FileSys failed, rc=ReturnCode rsn=ReasonCode
IOEZ00746E
Automatic re-enablement of file system FileSys halted after repeated failures
IOEZ00747I
Automatically re-enabling file system FileSys
IOEZ00750E
Support for multi-file system aggregates has been removed; attach or mount of aggrname is denied.
IOEZ00751I
mountparm is no longer a supported mount parm. It is ignored.
IOEZ00752E
Verification of aggregate terminated because error limit max_errors exceeded
IOEZ00753I
Salvage is repairing anode table pages.
IOEZ00754I
Salvage is repairing partially free list.
IOEZ00755I
Salvage is repairing the ZLC list.
IOEZ00756I
Salvage is repairing file, directory, and ACL objects.
IOEZ00757I
Salvage is repairing bitmap pages.
IOEZ00758I
Salvage repaired anode anode table pages, p_free partially free pages, zlc zlc pages, indirect indirect blocks.
IOEZ00759I
Salvage found number corruptions of security attributes
IOEZ00760I
No IOEZPRM DD specified. Parmlib search being used.
IOEZ00761E
Specified PARM too long, length = length
IOEZ00762E
Error in PARM specification string
IOEZ00763E
Suffix at position position too long
IOEZ00764E
Comma or right paren expected at position position
IOEZ00765E
Suffix at position position not two alphanumeric chars
IOEZ00766E
No suffixes found at position position
IOEZ00767E
No closing paren found at position position
IOEZ00768E
No open paren found at position position
IOEZ00769E
No equals sign found at position position
IOEZ00770E
Extra characters were found at position position
IOEZ00771E
PRM not found at position position
IOEZ00773E
Failed to initialize storage, ending
IOEZ00774E
Open for aggregate aggregate_name failed with code=return_code. Aggregate may be attached.
IOEZ00775E
The required SYSPRINT DD card has a problem code=return_code
IOEZ00776I
Salvage is repairing the totally free page stack.
IOEZ00777A
Restarting exception a_code occurred, reason r_code abend psw <PSW_1 PSW_2> <PSW_3 PSW_4 >
IOEZ00778I
General Registers Rreg_num: <r1 r2> <r3 r4> <r5 r6> <r7 r8>
IOEZ00780E
Aggregate aggregate_name contains zero or more than one file system and cannot be salvaged.
IOEZ00781I
Salvage repaired directory directory entries and bitmap bitmap pages.
IOEZ00782I
Salvage has verified verified_num of total_num object in the file_system.
IOEZ00783E
Aggregate aggregate_name is damaged.
IOEZ00784E
Non-terminating exception AbendCode occurred, reason ReasonCode abend psw PSW1H PSW1L PSW2H PSW2L
IOEZ00785I
Log file contents corrupted, repairing log contents and continuing with salvage
IOEZ00786I
Aggregate aggregate_name was not unmounted cleanly. Last update time stamp=time_stamp sysname=system_name
IOEZ00787I
Repair of aggregate aggregate_name completed. All minor errors have been repaired.
IOEZ00788E
Open for aggregate aggregate_name failed with code=return_code. The aggregate was not found.
IOEZ00789E
Open for aggregate aggregate_name failed with code=return_code. The aggregate is busy and may be mounted or attached.
IOEZ00790I
Aggregate aggrname is already at version 5
IOEZ00791I
Successfully converted directory name to version 5 format.
IOEZ00792E
Failed to prepend the current working directory, error=errorCode reason=reasonCode.
IOEZ00793E
Error=ReturnCode reason=ReasonCode received while attempting to convert directory name to version 5 format
IOEZ00794E
Failed to get information for directory name, error=returnCode reason=reasonCode.
IOEZ00795E
Open for aggregate aggregate_name failed with code=return_code.
IOEZ00797I
Skip page logical_page (physical page physical_page ) of v5 directory (index=index_number).
IOEZ00798I
Found more than number_entries entries in directory (index=index_number) and skipping duplicate name checking for any additional entries.
IOEZ00799A
zFS stand-alone utility ran out of storage above bar, total of <high_megabytes,,low_megabytesM bytes used, size attempted was <high_storage,,low_storage>, MEMLIMIT was <high_memlimit,,low_memlimit>, class class_number type storage_type.
IOEZ00800I
Conversion has processed number of total objects in the anode table.
IOEZ00801I
Directory conversion begun for inodenumber, directory size is total pages.
IOEZ00802I
Directory conversion completed, directory size now total pages.
IOEZ00803I
dirs directories were found, dirs4 converted, v4Pages directory pages converted to v5Pages directory pages.
IOEZ00805A
Aggregate size size 4K pages is too large to convert to version 4.
IOEZ00806A
Directory size sizeK bytes, sub-directory count SubDirs cannot be converted.
IOEZ00807I
In a wait to verify that aggregate aggregate_name has no other writers. Member member_namesysplex_name last wrote to the aggregate on time.
IOEZ00808I
Successfully converted all directories in aggregate aggrname to version version.
IOEZ00809I
Error error_code reason reason_code received while attempting to convert all directories in aggregate aggrname to version version.
IOEZ00810I
Successfully changed aggregate aggrname to version version.
IOEZ00811E
Error return_code reason reason_code received while attempting to change aggregate aggrname to version version.
IOEZ00812I
Successfully changed aggregate aggrname to version 1.version.
IOEZ00813I
Error error_code reason reason_code received while attempting to change aggregate aggrname to version 1.version.
IOEZ00814E
Must specify either -path or -aggrversion.
IOEZ00815E
Enqueue queue_name, held by system_name, could not be obtained for shutdown processing. zFS will terminate abnormally.
IOEZ00816I
Large FLC processing values mindirsize=mindirsize bufsize=bufsize bufnum=bufnum inactive=inactive.
IOEZ00817E
Large FLC syntax error for parameter, with text value.
IOEZ00819E
Large FLC bufaddr ran out of space for inode inodenumber in filesystem.
IOEZ00821E
Error errcode populating Large FLC buffaddrfor inode inodenumber in filesystem.
IOEZ00822E
Logsize too large with the number of physical disk blocks available.
IOEZ00823E
Dynamic allocation error occurred for dataset DatasetName. rc=Retcode err=Reterr info=Retinfo SMSreason=Retrsn func=func
IOEZ00824E
Aggregate too small. Increase the size of the VSAM linear dataset.
IOEZ00825E
Aggregate contains file system. Specify the -overwrite option to format.