0 | — | Equate Symbol: IwmRetCodeOk
Meaning: Successful completion.
Action:
None required. |
4 | — | Equate Symbol: IwmRetCodeWarning
Meaning: Successful completion, unusual conditions
noted. |
8 | — | Equate Symbol: IwmRetCodeInvocError
Meaning: Invalid invocation environment or parameters. |
8 | xxxx0801 | Equate Symbol: IwmRsnCodeSrbMode
Meaning: The caller is in SRB mode.
Action: Avoid requesting this function while in
SRB mode. |
8 | xxxx0802 | Equate Symbol: IwmRsnCodeXmemUserKeyTkn
Meaning: The caller is in cross-memory mode while
the token was requested in user key.
Action:
Avoid requesting this function while in cross-memory mode. |
8 | xxxx0803 | Equate Symbol: IwmRsnCodeDisabled
Meaning: Caller is disabled.
Action:
Avoid requesting this function while disabled. |
8 | xxxx0804 | Equate Symbol: IwmRsnCodeLocked
Meaning: The caller is locked.
Action:
Avoid requesting this function while locked. |
8 | xxxx080B | Equate Symbol: IwmRsnCodeBadPl
Meaning: Error accessing parameter list.
Action: Check for possible storage overlay. |
8 | xxxx0810 | Equate Symbol: IwmRsnCodeEutFrr
Meaning: The caller has EUT FRR established.
Action: Avoid requesting this function with an EUT
FRR set. |
8 | xxxx0812 | Equate Symbol: IwmRsnCodeBadAscb
Meaning: Bad ASCB address passed.
Action: Check for possible storage overlay. |
8 | xxxx0823 | Equate Symbol: IwmRsnCodeDatoff
Meaning: The caller invoked the service while DATOFF
Action: Avoid requesting this function in this environment. |
8 | xxxx0824 | Equate Symbol: IwmRsnCodeAmode24
Meaning: The caller invoked the service but was
in 24-bit addressing mode.
Action:
Request this function only when you are in 31-bit addressing
mode. |
8 | xxxx0825 | Equate Symbol: IwmRsnCodeAscModeNotPrimary
Meaning: The caller invoked the service but was
not DAT on Primary ASC mode.
Action: Avoid
requesting this function in this environment. |
8 | xxxx0826 | Equate Symbol: IwmRsnCodeTaskTerm
Meaning: The caller invoked the service while task
termination is in progress for the TCB associated with the owner.
Action: Avoid requesting this function in this environment. |
8 | xxxx0827 | Equate Symbol: IwmRsnCodeRsvdNot0
Meaning: Reserved field in parameter list was non-zero.
Action: Check for possible storage overlay of the
parameter list. |
8 | xxxx0828 | Equate Symbol: IwmRsnCodeBadVersion
Meaning: Version number in parameter list is not
valid.
Action: Check for possible storage
overlay of the parameter list. |
8 | xxxx0829 | Equate Symbol: IwmRsnCodeBadOptions
Meaning: Parameter list omits required parameters
or supplies mutually exclusive parameters or provides data associated
with options not selected.
Action: Check
for possible storage overlay of the parameter list. |
8 | xxxx082C | Equate Symbol: IwmRsnCodeBadNumberAscb
Meaning: NUMBERASCB variable is not a positive value.
Action: Check for possible storage overlay of the
parameter list or variable. |
8 | xxxx082E | Equate Symbol: IwmRsnCodeConnectExists
Meaning: Connect has already been established for
the current home address space.
Action:
Avoid requesting this function when a connection already exists. |
8 | xxxx0840 | Equate Symbol: IwmRsnCodeServiceNotEnabled
Meaning: Requested connection type cannot be established
in the current execution environment. This occurs when SERVER_MANAGER=YES
is specified and the program is run as a batch job in a WLM-managed
job class.
Action: Run the program as
a started task. |
8 | xxxx0841 | Equate Symbol: IwmRsnCodeXMemMode
Meaning: The caller is in cross-memory mode.
Action: Invoke the function in non-cross memory
mode. |
8 | xxxx0847 | Equate Symbol: IwmRsnCodeOtherSpaceConnected
Meaning: Another address space with the same subsystem
type and name is connected to WLM on the MVS™ image
and has the role of queue manager or router.
Action:
Avoid requesting this function with duplicate values. |
8 | xxxx0849 | Equate Symbol: IwmRsnCodeWLMServBadAPPL
Meaning: The application environment name (APPLENV=)
specified is not the same as the one used by WLM to start the server.
Action: Verify that the start parameters for the
application environment are coded correctly in the WLM ISPF application,
and that those parameters are used by the started JCL procedure. |
8 | xxxx084A | Equate Symbol: IwmRsnCodeWLMServBadSSN
Meaning: The subsystem name (SUBSYSNM=) specified
is not the same as the one used by WLM to start the server.
Action: Verify that the start parameters for the
application environment are coded correctly in the WLM ISPF application,
and that those parameters are used by the started JCL procedure. |
8 | xxxx084B | Equate Symbol: IwmRsnCodeWLMServBadSST
Meaning: The subsystem type (SUBSYS=) specified
is not the same as the one used by WLM to start the server.
Action: Verify that the start parameters for the
application environment are coded correctly in the WLM ISPF application,
and that those parameters are used by the started JCL procedure. |
8 | xxxx084D | Equate Symbol: IwmRsnCodeNotAuthConnect
Meaning: The caller must be supervisor state or
have PSW key mask 0-7 authority to connect to the requested WLM services.
Action: Avoid requesting this function in this environment. |
8 | xxxx084E | Equate Symbol: IwmRsnCodeWlmServBadType
Meaning: For WLM started servers, the SERVER_TYPE=
is not the one used to start the server.
Action:
Specify the correct SERVER_TYPE. |
8 | xxxx0853 | Equate Symbol: IwmRsnCodeWlmQmBadType
Meaning: There is a queue manager or router environment
of the specified subsystem name, but of a different type than that
specified by the caller.
Action: Verify
that the option for queue manager/router is specified correctly on
IWM4CON. If the option is correct, then server address spaces for
a different Server_Type exist and must terminate before the current
space may connect as a queue manager or router. |
8 | xxxx0855 | Equate Symbol: IwmRsnCodeBadNumEUMax
Meaning: PARALLEL_EU variable is greater than the
maximum of 65534.
Action: Specify a value
between 1 and 65534. |
8 | xxxx0856 | Equate Symbol: IwmRsnCodeBadNumEUMin
Meaning: PARALLEL_EU is less than the minimum of
1.
Action: Specify a value between 1 and
65534. |
8 | xxxx085C | Equate Symbol: IwmRsnCodeWrongNumEU
Meaning: The caller invoked the service with a PARALLEL_EU
value which is different from the PARALLEL_EU of existing servers
in the application environment
Action:
Ensure that all servers in the application environment specify the
same PARALLEL_EU value.
Note:
If this reason
code occurs after changes have been made to the application environment,
refer to the section about "Making changes to the Application
Environment Servers" in Chapter 13 "Defining Application Environments"
in z/OS MVS Planning: Workload Management. |
8 | xxxx0873 | Equate Symbol: IwmRsnCodeWrongSrvLmt
Meaning: The caller invoked the service with a SERVER_LIMIT
parameter setting which is different from the SERVER_LIMIT of existing
servers in the application environment.
Action:
Ensure that all servers in the application environment specify the
same SERVER_LIMIT value. |
8 | xxxx0874 | Equate Symbol: IwmRsnCodeWrongMngTsk
Meaning: The caller invoked the service with a MANAGE_TASKS
parameter setting which is different from the MANAGE_TASKS of existing
servers in the application environment
Action:
Ensure that all servers in the application environment specify the
same MANAGE_TASKS value. |
8 | xxxx0878 | Equate Symbol: IwmRsnCodeBadNumLimitMax
Meaning: The caller invoked the service with a SERVER_LIMIT
parameter setting which exceeds the maximum number of tasks which
can be started in a server address space. The current maximum value
is 65534.
Action: Correct the number or
do not specify SERVER_LIMIT parameter in order to use the default. |
8 | xxxx0879 | Equate Symbol: IwmRsnCodeBadNumLimitMin
Meaning: The caller invoked the service with a SERVER_LIMIT
parameter setting which is less than what has been defined on the
PARALLEL_EU parameter.
Action: Ensure
that SERVER_LIMIT is always greater or equal to PARALLEL_EU. |
8 | xxxx087A | Equate Symbol: IwmRsnCodeNoQServer
Meaning: The MANAGE_TASKS parameter is not allowed
when QUEUE_SERVER=YES has been specified.
Action:
Ensure to use the parameters correctly. |
8 | xxxx088E | Equate Symbol: IwmRsnCodeWlmServBadSSND
Meaning: For WLM started servers, the NODENM= is
not the one used to start the server.
Action:
Specify the correct NODENM. |
8 | xxxx088F | Equate Symbol: IwmRsnCodeApplNotSSN
Meaning: The application environment name is defined
for use by a different subsystem node.
Action:
Check whether the correct application environment name is being used. |
C | — | Equate Symbol: IwmRetCodeEnvError
Meaning: Environmental error. |
C | xxxx0C01 | Equate Symbol: IwmRsnCodeNoStg
Meaning: Storage is not available for the request.
Action: There is a storage shortage. The function
may work successfully at a later time. |
C | xxxx0C09 | Equate Symbol: IwmRsnCodeNoResmgr
Meaning: Resource manager could not be established.
Action: No action required. This condition may be
due to a storage shortage condition. |
C | xxxx0C14 | Equate Symbol: IwmRsnCodeNoWorkShutDown
Meaning: No work selected. Caller is to shutdown.
Action: The server should shut down (terminate). |
C | xxxx0C19 | Equate Symbol: IwmRsnCodeNotSecAuthConnect
Meaning: The caller is not authorized by SAF to
connect to WLM with SERVER_MANAGER=YES.
Action:
The security administrator must grant access to the appropriate resource. |
C | xxxx0C1A | Equate Symbol: IwmRsnCodeApplNotDefined
Meaning: The application environment name is not
defined in the active WLM policy.
Action:
Check whether the correct application environment name is being used.
If so, a service administrator must define the application environment
in the WLM service definition. |
C | xxxx0C1B | Equate Symbol: IwmRsnCodeApplNotSST
Meaning: The application environment name is defined
for use by a different subsystem type in the active WLM policy.
Action: Check whether the correct application environment
name is being used. If so, a service administrator must change the
application environment in the WLM service definition to specify the
correct subsystem type. |
C | xxxx0C1F | Equate Symbol: IwmRsnCodeServerExists
Meaning: A server exists for the specified application
environment which only allows 1 such server in the sysplex.
Action: Check whether the correct application environment
name is being used. If so and the current server is shutting down,
a retry may be successful after a delay. |
C | xxxx0C22 | Equate Symbol: IwmRsnCodeApplEnvQuiesced
Meaning: The specified application environment has
been quiesced, server cannot be started for the request.
Action: Restart the application environment and
then retry the request. |
10 | — | Equate Symbol: IwmRetCodeCompError
Meaning: Component error.
Action:
No action required. The function may be successful if invoked again. |