0 | — | Equate Symbol: IwmRetCodeOk
Meaning: Successful completion.
Action:
None required. |
4 | — | Equate Symbol: IwmRetCodeWarning
Meaning: Successful completion, unusual conditions
noted. |
8 | — | Equate Symbol: IwmRetCodeInvocError
Meaning: Invalid invocation environment or parameters. |
8 | xxxx0801 | Equate Symbol: IwmRsnCodeSrbMode
Meaning: Caller is in SRB mode.
Action:
Avoid requesting this function while in SRB mode. |
8 | xxxx0802 | Equate Symbol: IwmRsnCodeXmemUserKeyTkn
Meaning: Caller is in cross-memory mode while the
token was requested in user key.
Action:
Avoid requesting this function while in cross-memory mode. |
8 | xxxx0803 | Equate Symbol: IwmRsnCodeDisabled
Meaning: Caller is disabled.
Action:
Avoid requesting this function while disabled. |
8 | xxxx0804 | Equate Symbol: IwmRsnCodeLocked
Meaning: Caller is locked.
Action:
Avoid requesting this function while locked. |
8 | xxxx080B | Equate Symbol: IwmRsnCodeBadPl
Meaning: Error accessing parameter list.
Action: Check for possible storage
overlay. Also check if you call this macro in 64-bit address mode.
Refer to the description of reason code xxxx089E for further information. |
8 | xxxx0810 | Equate Symbol: IwmRsnCodeEutFrr
Meaning: Caller has EUT FRR established.
Action: Avoid requesting this function with an EUT
FRR set. |
8 | xxxx0812 | Equate Symbol: IwmRsnCodeBadAscb
Meaning: Bad ASCB address passed.
Action: Check for possible storage overlay. |
8 | xxxx0823 | Equate Symbol: IwmRsnCodeDatoff
Meaning: Caller invoked service while DATOFF
Action: Avoid requesting this function in this environment. |
8 | xxxx0824 | Equate Symbol: IwmRsnCodeAmode24
Meaning: Caller invoked service but was in 24 bit
addressing mode.
Action: Request this
function only when you are in 31 bit addressing mode. |
8 | xxxx0825 | Equate Symbol: IwmRsnCodeAscModeNotPrimary
Meaning: Caller invoked service but was not DAT
on Primary ASC mode.
Action: Avoid requesting
this function in this environment. |
8 | xxxx0826 | Equate Symbol: IwmRsnCodeTaskTerm
Meaning: Caller invoked service while task termination
is in progress for the TCB associated with the owner.
Action: Avoid requesting this function in this environment. |
8 | xxxx0827 | Equate Symbol: IwmRsnCodeRsvdNot0
Meaning: Reserved field in parameter list was non-zero.
Action: Check for possible storage overlay of the
parameter list. |
8 | xxxx0828 | Equate Symbol: IwmRsnCodeBadVersion
Meaning: Version number in parameter list is not
valid.
Action: Check for possible storage
overlay of the parameter list. |
8 | xxxx0829 | Equate Symbol: IwmRsnCodeBadOptions
Meaning: Parameter list omits required parameters
or supplies mutually exclusive parameters or provides data associated
with options not selected.
Action: Check
for possible storage overlay of the parameter list. |
8 | xxxx082C | Equate Symbol: IwmRsnCodeBadNumberAscb
Meaning: NUMBERASCB variable is not a positive value.
Action: Check for possible storage overlay of the
parameter list or variable. |
8 | xxxx082E | Equate Symbol: IwmRsnCodeConnectExists
Meaning: Connect has already been established for
the current home address space.
Action:
Avoid requesting this function when a connection already exists. |
8 | xxxx0840 | Equate Symbol: IwmRsnCodeServiceNotEnabled
Meaning: Requested connection type cannot be established
in the current execution environment. This occurs when SERVER_MANAGER=YES
is specified and the program is run as a batch job in a WLM-managed
job class.
Action: Run the program as
a started task. |
8 | xxxx0841 | Equate Symbol: IwmRsnCodeXMemMode
Meaning: Caller is in cross memory mode.
Action: Invoke the function in non-cross memory
mode. |
8 | xxxx0847 | Equate Symbol: IwmRsnCodeOtherSpaceConnected
Meaning: Another address space with the same subsystem
type and name is connected to WLM on the MVS™ image
and has the role of queue manager or router.
Action:
Avoid requesting this function with duplicate values. |
8 | xxxx0849 | Equate Symbol: IwmRsnCodeWLMServBadAPPL
Meaning: The application environment name (APPLENV=)
specified is not the same as the one used by WLM to start the server.
Action: Verify that the start parameters for the
application environment are coded correctly in the WLM ISPF application,
and that those parameters are used by the started JCL procedure. |
8 | xxxx084A | Equate Symbol: IwmRsnCodeWLMServBadSSN
Meaning: The subsystem name (SUBSYSNM=) specified
is not the same as the one used by WLM to start the server.
Action: Verify that the start parameters for the
application environment are coded correctly in the WLM ISPF application,
and that those parameters are used by the started JCL procedure. |
8 | xxxx084B | Equate Symbol: IwmRsnCodeWLMServBadSST
Meaning: The subsystem type (SUBSYS=) specified
is not the same as the one used by WLM to start the server.
Action: Verify that the start parameters for the
application environment are coded correctly in the WLM ISPF application,
and that those parameters are used by the started JCL procedure. |
8 | xxxx084D | Equate Symbol: IwmRsnCodeNotAuthConnect
Meaning: The caller must be supervisor state or
have PSW key mask 0-7 authority to connect to the requested WLM services.
Action: Avoid requesting this function in this environment. |
8 | xxxx084E | Equate Symbol: IwmRsnCodeWlmServBadType
Meaning: For WLM started servers, the SERVER_TYPE=
is not the one used to start the server.
Action:
Specify the correct SERVER_TYPE. |
8 | xxxx0853 | Equate Symbol: IwmRsnCodeWlmQmBadType
Meaning: There is a queue manager or router environment
of the specified subsystem name, but of a different type than that
specified by the caller.
Action: Verify
that the option for queue manager/router is specified correctly on
IWMCONN. If the option is correct, then server address spaces for
a different Server_Type exist and must terminate before the current
space may connect as a queue manager or router. |
8 | xxxx0855 | Equate Symbol: IwmRsnCodeBadNumEUMax
Meaning: PARALLEL_EU variable is greater than the
maximum of 1000.
Action: Specify a value
between 1 and 1000. |
8 | xxxx0856 | Equate Symbol: IwmRsnCodeBadNumEUMin
Meaning: PARALLEL_EU variable is less than the minimum
of 1.
Action: Specify a value between
1 and 1000. |
8 | xxxx085C | Equate Symbol: IwmRsnCodeWrongNumEU
Meaning: Caller invoked service with a PARALLEL_EU
value which is different from the PARALLEL_EU of existing servers
in the application environment
Action:
Ensure that all servers in the application environment specify the
same PARALLEL_EU value. |
8 | xxxx0873 | Equate Symbol: IwmRsnCodeWrongSrvLmt
Meaning: Caller invoked service with a SERVER_LIMIT
parameter setting which is different from the SERVER_LIMIT of existing
servers in the application environment
Action:
Ensure that all servers in the application environment specify the
same SERVER_LIMIT value. |
8 | xxxx0874 | Equate Symbol: IwmRsnCodeWrongMngTsk
Meaning: Caller invoked service with a MANAGE_TASKS
parameter setting which is different from the MANAGE_TASKS of existing
servers in the application environment
Action:
Ensure that all servers in the application environment specify the
same MANAGE_TASKS value. |
8 | xxxx0878 | Equate Symbol: IwmRsnCodeBadNumLimitMax
Meaning: Caller invoked service with a SERVER_LIMIT
parameter setting which exceeds the maximum number of tasks which
can be started in a server address space.
Action:
Correct number or do not specify SERVER_LIMIT parameter in order to
use the default. |
8 | xxxx0879 | Equate Symbol: IwmRsnCodeBadNumLimitMin
Meaning: Caller invoked service with a SERVER_LIMIT
parameter setting which is less than what has been defined on the
PARALLEL_EU parameter.
Action: Ensure
that SERVER_LIMIT is always greater or equal to PARALLEL_EU. |
8 | xxxx087A | Equate Symbol: IwmRsnCodeNoQServer
Meaning: The MANAGE_TASKS parameter is not allowed
when QUEUE_SERVER=YES has been specified.
Action:
Ensure to use the parameters correctly. |
8 | xxxx088E | Equate Symbol: IwmRsnCodeWlmServBadSSND
Meaning: For WLM started servers, the NODENM= is
not the one used to start the server.
Action:
Specify the correct NODENM. |
8 | xxxx088F | Equate Symbol: IwmRsnCodeApplNotSSN
Meaning: The application environment name is defined
for use by a different subsystem node.
Action:
Check whether the correct application environment name is being used. |
8 | xxxx089E | Equate Symbol: IwmRsnCodeServiceAModeMismatch
Meaning: The caller is in 64-bit address mode and
tried to invoke a service macro that is only enabled for a 31-bit
environment.
Action: Use the 64-bit enabled
service macro (IWM4CON) or change the address mode of the caller to
31-bit. |
C | — | Equate Symbol: IwmRetCodeEnvError
Meaning: Environmental error. |
C | xxxx0C01 | Equate Symbol: IwmRsnCodeNoStg
Meaning: Storage is not available for the request.
Action: There is a storage shortage. The function
may work successfully at a later time. |
C | xxxx0C09 | Equate Symbol: IwmRsnCodeNoResmgr
Meaning: Resource manager could not be established.
Action: No action required. This condition may be
due to a storage shortage condition. |
C | xxxx0C14 | Equate Symbol: IwmRsnCodeNoWorkShutDown
Meaning: No work selected. Caller is to shutdown.
Action: The server should shut down (terminate). |
C | xxxx0C19 | Equate Symbol: IwmRsnCodeNotSecAuthConnect
Meaning: The caller is not authorized by SAF to
connect to WLM with SERVER_MANAGER=YES.
Action:
The security administrator must grant access to the appropriate resource. |
C | xxxx0C1A | Equate Symbol: IwmRsnCodeApplNotDefined
Meaning: The application environment name is not
defined in the active WLM policy.
Action:
Check whether the correct application environment name is being used.
If so, a service administrator must define the application environment
in the WLM service definition. |
C | xxxx0C1B | Equate Symbol: IwmRsnCodeApplNotSST
Meaning: The application environment name is defined
for use by a different subsystem type in the active WLM policy.
Action: Check whether the correct application environment
name is being used. If so, a service administrator must change the
application environment in the WLM service definition to specify the
correct subsystem type. |
C | xxxx0C1F | Equate Symbol: IwmRsnCodeServerExists
Meaning: A server exists for the specified application
environment which only allows 1 such server in the sysplex.
Action: Check whether the correct application environment
name is being used. If so and the current server is shutting down,
a retry may be successful after a delay. |
C | xxxx0C22 | Equate Symbol: IwmRsnCodeApplEnvQuiesced
Meaning: The specified application environment has
been quiesced, server cannot be started for the request.
Action: Restart the application environment and
then retry the request. |
10 | — | Equate Symbol: IwmRetCodeCompError
Meaning: Component error.
Action:
No action required. The function may be successful if invoked again. |