Parameter Descriptions

The parameter descriptions for REQUEST=SET_RECLVCTR are listed in alphabetical order. Default values are underlined:

REQUEST=SET_RECLVCTR

Use this input parameter to specify that the reclaiming vector (RECLVCTR) for the specified storage class (STGCLASS) be activated or deactivated.

,ANSAREA=NO_ANSAREA

,ANSAREA=ansarea

Use this output parameter to specify an answer area to contain information returned from the request. The format of the answer area is described by the IXLYCAA mapping macro.

To Code: Specify the RS-type name or address (using a register from 2 to 12) of an area (with a length of ANSLEN) where the information returned by the request will be put.

,ANSLEN=anslen

Use this input parameter to specify the size of the storage area specified by ANSAREA.

Use either CAALEVEL0LEN or CAALEVEL1LEN of the IXLYCAA mapping macro to determine the minimum size of the answer area. The answer area length must be at least large enough to accomodate the level of the IXLYCAA mapping appropriate to the requested function. When the value of PLISTVER is 0 — 3, the minimum answer area length is CAALEVEL0LEN; when the value of PLISTVER is 4 — 6, the minimum answer area length is CAALEVEL1LEN.

To Code: Specify the RS-type name or address (using a register from 2 to 12) of a 2-byte field that contains the length of the answer area (ANSAREA).

,CONTOKEN=contoken

Use this input parameter to specify the connect token that was returned by the IXLCONN service in the IXLCONN answer area, mapped by IXLYCONA. The connect token uniquely identifies your connection to the cache structure, and must be specified on each IXLCACHE invocation.

To Code: Specify the RS-type name or address (using a register from 2 to 12) of a 16-byte field that contains the connect token.

,MF=S

,MF=(L,mfctrl)

,MF=(L,mfctrl,mfattr)

,MF=(L,mfctrl,0D)

,MF=(E,mfctrl)

,MF=(E,mfctrl,COMPLETE)

Use MF=S to specify the standard form of the macro, which builds an inline parameter list and generates the macro invocation to transfer control to the service.

Use MF=L to specify the list form of the macro. Use the list form together with the execute form of the macro for applications that require reentrant code. The list form defines an area of storage that the execute form uses to store the parameters. Only the PLISTVER parameter can be coded with the list form of the macro.

Use MF=E to specify the execute form of the macro. Use the execute form together with the list form of the macro for applications that require reentrant code. The execute form stores the parameters into the storage area defined by the list form, and generates the macro invocation to transfer control to the service.

,mfctrl: Use this output parameter to specify a storage area to contain the parameters.
To Code: Specify the RS-type name or address (using a register from 2 to 12) of the parameter list.
,mfattr: Use this input parameter to specify the name of a 1- to 60-character string that can contain any value that is valid on an assembler DS pseudo-op. You can use this parameter to force boundary alignment of the parameter list. If you do not code mfattr, the system provides a value of 0D, which forces the parameter list to a doubleword boundary.
,COMPLETE: Use this input parameter to require that the system check for required parameters and supply defaults for omitted optional parameters.
Note: In the macro expansion you might see some defaults for optional parameters that are not documented here. The ones that are not documented do not have any effect on the macro. For example, if SMILE=var were an optional parameter and the default is SMILE=NO_SMILE then it would not be documented. However, if the default was SMILE=:-), then it would be documented because a value would be the default.

,MODE=SYNCSUSPEND

,MODE=SYNCECB

,MODE=SYNCEXIT

,MODE=SYNCTOKEN

,MODE=ASYNCECB

,MODE=ASYNCEXIT

,MODE=ASYNCTOKEN

,MODE=ASYNCNORESPONSE

Use this input parameter to specify:

Whether the request is to be performed synchronously or asynchronously
How you wish to be notified of request completion if the request is processed asynchronously.

See z/OS MVS Programming: Sysplex Services Guide for more information on understanding synchronous and asynchronous cache operations.

MODE=SYNCSUSPEND: The request processes synchronously. If necessary, the request is suspended until it can complete synchronously. To use this option, your program must be enabled for I/O and external interrupts.
MODE=SYNCECB: The request processes synchronously if possible. If the request processes asynchronously, the ECB specified by REQECB is posted when the request completes.
MODE=SYNCEXIT: The request processes synchronously if possible. If the request processes asynchronously, your complete exit is given control when the request completes.
MODE=SYNCTOKEN: The request processes synchronously if possible. If the request processes asynchronously, an asynchronous request token is returned to the area specified by REQTOKEN. Use the returned request token on the IXLFCOMP macro to determine whether your request has completed.
Note: ANSAREA is a required parameter when MODE=SYNCTOKEN is specified.
MODE=ASYNCECB: The request processes asynchronously. The ECB specified by REQECB is posted when the request completes.
MODE=ASYNCEXIT: The request processes asynchronously. Your complete exit is given control when the request completes.
MODE=ASYNCTOKEN: The request processes asynchronously. An asynchronous request token is returned to the area specified by REQTOKEN. Use the returned request token on the IXLFCOMP macro to determine whether your request has completed.
Note: ANSAREA is a required parameter when MODE=ASYNCTOKEN is specified.
MODE=ASYNCNORESPONSE: The request processes asynchronously. No notification of request completion is provided.

,PLISTVER=IMPLIED_VERSION

,PLISTVER=MAX

,PLISTVER=plistver

Use this input parameter to specify the version of the macro. See Understanding IXLCACHE Version Support for a description of the options available with PLISTVER.

,RECLVCTR=NO_RECLVCTR

,RECLVCTR=reclvctr

Use this input parameter to define and activate a reclaiming vector. The RECLVCTR area must be arranged as follows:

The area must contain, starting at offset zero, a fully initialized array of halfwords, each corresponding to a storage class. (There must be one halfword for each storage class defined for the structure.) The relative position of a halfword in the array determines which storage class that halfword is associated with. For instance, the first halfword in the array is associated with storage class one, the second halfword is associated with storage class two, and so forth.
Each halfword in the array must contain the reclaiming count for its associated storage class. You can avoid reclaims from a storage class by placing zero in the appropriate halfword.

If the specified reclaiming vector is not already active and a REPEAT factor of zero is specified, the REPEAT factor is ignored. If the reclaiming vector is already active, a zero REPEAT factor deactivates the reclaiming vector.

To Code: Specify the RS-type name or address (using a register from 2 to 12) of a storage area (with a length of double the number of storage classes defined for the structure on the IXLCONN macro, keyword NUMSTGCLASS) that contains the reclaiming vectors.

,REPEAT=repeat

Use this input parameter to specify the repeat factor for the reclaiming vector being activated (or deactivated). The repeat factor defines the number of passes through the reclaiming vector before the vector deactivates. The specified value must fall within the range 0 to 65535, inclusive. Specifying a repeat factor of zero causes the active reclaiming vector for the specified storage class to be deactivated.

To Code: Specify the RS-type name or address (using a register from 2 to 12) of a 2-byte field that contains the repeat factor.

,REQDATA=NO_REQDATA

,REQDATA=reqdata

Use this input parameter with MODE=SYNCEXIT or MODE=ASYNCEXIT to pass any data you choose to the complete exit. The exit will get control only if the request is processed asynchronously.

To Code: Specify the RS-type name or address (using a register from 2 to 12) of an 8-byte field that contains the data to be passed to the complete exit.

,REQECB=reqecb

Use this output parameter with either MODE=SYNCECB or MODE=ASYNCECB to specify the address of an ECB, which is to be posted when the request completes if the request was processed asynchronously.

Before coding REQECB, you must ensure that:

You initialize the ECB before you issue the request.
The ECB resides in either common storage or the home address space where IXLCONN was issued.
Any tasks that wait for the ECB to be posted reside in the home address space where IXLCONN was issued.

To Code: Specify the RS-type name or address (using a register from 2 to 12) of a 4-byte field that contains the address of the ECB to be posted when the request completes. The ECB must be aligned on a fullword boundary.

,REQID=NO_REQID

,REQID=reqid

Use this input parameter to specify a user-defined request identifier to be associated with the request. You can specify this request identifier on the IXLPURGE macro to cancel a request that has not yet been processed.

To Code: Specify the RS-type name or address (using a register from 2 to 12) of an 8-byte field that contains the user-defined request identifier.

,REQTOKEN=reqtoken

Use this output parameter with either MODE=SYNCTOKEN or MODE=ASYNCTOKEN to specify the address of a storage area to receive the request token that is returned when the request will be processed asynchronously. This token, which uniquely identifies the request, must be used as input to the IXLFCOMP macro, which you use to determine if the request has completed.

To Code: Specify the RS-type name or address (using a register from 2 to 12) of a 16-byte field where the system will put the request token.

,RETCODE=retcode

Use this output parameter to specify a field to contain the return code. (The return code is also returned in register 15.)

To Code: Specify the RS-type name or address (using a register from 2 to 12) of a 4-byte field that will contain the return code when the request has completed.

,RSNCODE=rsncode

Use this output parameter to specify a field to contain the reason code returned, if applicable. (The reason code is also returned in register 0.)

To Code: Specify the RS-type name or address (using a register from 2 to 12) of a 4-byte field that will contain the reason code (if any) when the request has completed.

,STGCLASS=stgclass

Use this input parameter to specify the storage class for which a reclaim vector is to be activated or deactivated.

To Code: Specify the RS-type name or address (using a register from 2 to 12) of a 1-byte field that contains the storage class.