00 |
None. |
Meaning: IXCTERM completed successfully; XCF will terminate
the member. Action: None.
|
08 |
04 |
Equate Symbol: IXCTERMRSNNOTACTIVE Meaning: Program
error. The calling member token does not identify an active member.
Action: Take
one or more of the following actions: - Ensure that the proper MEMTOKEN address and ALET (if appropriate)
were used.
- Any additional action depends on your application. Because the
member (MEMTOKEN) is no longer active, your program might want to
stop any further activity associated with the member.
|
08 |
08 |
Equate Symbol: IXCTERMRSNINAPPROPRIATEPRIMARY Meaning: Program
error. The primary address space is not the same as the primary address
space of the caller of the IXCJOIN that placed the calling member
in the active state.
Action: Take one or more of the
following actions: - Ensure that the correct MEMTOKEN address and ALET (if appropriate)
were used.
- Change your program to issue IXCTERM from the address space in
which the calling member joined the group and retry the request.
|
08 |
0C |
Equate Symbol: IXCTERMRSNTARGETNOTACTIVE Meaning: Program
error. The target member is not an active member.
Action: If
the member is expected to be in an active state, ensure that the TARGET
MEMTOKEN is correct, and retry the request.
If the target
member is required to be in a not-defined state, you can use the IXCQUERY
service to determine if the member is in a created, quiesced, or failed
state. You can use the IXCDELET service to place the member in a not-defined
state.
|
08 |
10 |
Equate Symbol: IXCTERMRSNTARGETNOTDEFINED Meaning: Program
error. The target member is not defined to XCF.
Action: If
the TARGET member is expected to be in an active, created, quiesced,
or failed state, ensure that the correct TARGET MEMTOKEN was specified.
Otherwise, no action is required because the target member has terminated.
|
08 |
14 |
Equate Symbol: IXCTERMRSNTARGETDIFFERENTGROUP Meaning: Program
error. The target member and the issuing member are in different XCF
groups.
Action: Take one or more of the following actions:
- Ensure that the correct TARGET and MEMTOKEN member tokens were
specified. Check the addresses and ALETs (if appropriate).
- You might have to change your program to ensure that it issues
IXCTERM only with TARGET and caller (MEMTOKEN) members that are in
the same group.
|
08 |
18 |
Equate Symbol: IXCTERMRSNTARGETNOTVALID Meaning: Program
error. The target member token is not valid.
Action: Take
one or more of the following actions: - Ensure that the correct TARGET member token address and ALET (if
appropriate) were used.
- If your program is running in AR mode, ensure that the SYSSTATE
ASCENV=AR macro was issued before the IXCTERM.
|
08 |
1C |
Equate Symbol: IXCTERMRSNMEMTOKENNOTVALID Meaning: Program
error. The token of the issuing member is not valid.
Action: Correct
the member token and retry the request.
|
08 |
40 |
Equate Symbol: IXCTERMRSNPLISTRSVDNOTVALID Meaning: Program
error or environmental error. A reserved field in the control parameter
list is not zero.
Action: Check to see if your program
inadvertently overlaid the parameter list storage, and that it was
assembled with the correct macro library for the release of MVS™ your program is running on.
|
08 |
100 |
Equate Symbol: IXCTERMRSNPLISTBADALET Meaning: Program
error. Your program is running in AR mode, and the ALET that qualifies
the address of the control parameter list is neither zero nor associated
with a valid entry on the caller's DU-AL.
Action: Ensure
that: - You specified SYSSTATE ASCENV=AR before issuing the IXCJOIN macro.
- The ALET for the parameter list is on the DU-AL or is zero (primary
address space ALET).
|
08 |
104 |
Equate Symbol: IXCTERMRSNPLISTVERSIONNOTVALID Meaning: Program
error. The version number in the control parameter list is not valid.
Action: Check
to see if your program inadvertently overlaid the parameter list storage.
|
08 |
108 |
Equate Symbol: IXCTERMRSNPLISTBADFUNCTION Meaning: Program
error. The function code in the control parameter list is not valid.
Action: Check
to see if your program inadvertently overlaid the parameter list storage,
and that it was assembled with the correct macro library for the release
of MVS your program is running
on.
|
08 |
10C |
Equate Symbol: IXCTERMRSNPLISTBADSTG Meaning: Program
error or environmental error. XCF could not access the control parameter
list.
Action: Take one or more of the following actions:
- Ensure that the correct parameter list storage area was specified.
- If your program is running in AR mode:
- Ensure that you specified SYSSTATE ASCENV=AR before issuing the
IXCTERM macro.
- Ensure that the parameter list ALET is correct.
- Ensure that the parameter list storage area was not inadvertently
freed by your program.
|
08 |
118 |
Equate Symbol: IXCTERMRSNNOTTASKMODE Meaning: Program
error. The caller is not in task mode.
Action: Correct
your program so that it issues IXCTERM only while in task mode.
|
08 |
11C |
Equate Symbol: IXCTERMRSNNOTENABLED Meaning: Program
error. The caller is not enabled.
Action: Correct your
program so that it issues IXCTERM only while enabled.
|
08 |
120 |
Equate Symbol: IXCTERMRSNTARGETNOTMEMASSOCTASK Meaning: Program
error. The target member cannot be terminated because it is associated
with an address space instead of a task.
Action: Change
your program to associate the member with a task, or cancel the member's
associated address space.
|
10 |
None. |
Meaning: System error. XCF processing failed. Action: Retry
the request at least once. If the problem persists, record the return
code, and supply it to the appropriate IBM® support
personnel.
|