Record type 81: RACF initialization record

RACF® writes record type 81 at the completion of the initialization of RACF. This record contains:

Record type
Time stamp (time and date)
Processor identification
Name of each RACF database
Volume identification of each RACF database
Unit name of the RACF database
Data set name of the UADS data set
Volume identification of the UADS data set
RACF options
The maximum password interval
The default installation language codes in effect at IPL time.

The format of record type 81 is:

Offsets
Dec.	Hex.	Name	Length	Format	Description
0	0	SMF81LEN	2	Binary	Record length.
2	2	SMF81SEG	2	Binary	Segment descriptor.
4	4	SMF81FLG	1	Binary	System indicator Bit Meaning when set 0-2 Reserved for IBM's use 3 MVS/ 4 MVS/ 5 MVS/ 6 VS2 7 Reserved for IBM's use Note: For MVS/, bits 3, 4, 5, and 6 are on.
5	5	SMF81RTY	1	Binary	Record type: 81 (X'51').
6	6	SMF81TME	4	Binary	Time of day, in hundredths of a second, that the record was moved to the SMF buffer.
10	A	SMF81DTE	4	packed	Date that the record was moved to the SMF buffer, in the form 0`cyydddF` (where `F` is the sign).
14	E	SMF81SID	4	EBCDIC	System identification (from the SID parameter).
18	12	SMF81RDS	44	EBCDIC	Data set name of the RACF database for this IPL (blanks if RACF is not active).
62	3E	SMF81RVL	6	EBCDIC	Volume identification of RACF database. If the database is split among several DASD volumes, this field equals the first primary data set. If RACF is not active, this field is blank.
68	44	SMF81RUN	3	EBCDIC	Unit name of RACF database; blanks if RACF is not active. Note: If the master RACF primary database is on a device whose address is greater than X'FFF', the field contains ‘UCB’ instead of the EBCDIC device name.
71	47	SMF81UDS	44	EBCDIC	Data set name of the user attribute data set (UADS) data set for this IPL.
115	73	SMF81UVL	6	EBCDIC	Volume identification of the user attribute data set (UADS) data set.
121	79	SMF81OPT	1	Binary	Options indicator Bit Meaning when set 0 No RACROUTE REQUEST=VERIFY statistics are recorded 1 No DATASET statistics are recorded 2 RACROUTE REQUEST=VERIFY preprocessing exit routine, ICHRIX01, is active 3 RACROUTE REQUEST=AUTH preprocessing exit routine, ICHRCX01, is active 4 RACROUTE REQUEST=DEFINE preprocessing exit routine, ICHRDX01, is active 5 RACROUTE REQUEST=VERIFY postprocessing exit routine, ICHRIX02, is active 6 RACROUTE REQUEST=AUTH postprocessing exit routine, ICHRCX02, is active 7 New-password exit routine, ICHPWX01, is active
122	7A	SMF81OP2	1	Binary	Options indicator 2 Bit Meaning when set 0 No tape volume statistics are recorded 1 No DASD volume statistics are recorded 2 No terminal statistics are recorded 3 Command exit routine ICHCNX00 is active 4 Command exit routine ICHCCX00 is active 5 ADSP is not active 6 Encryption exit routine, ICHDEX01 is active 7 Naming convention table, ICHNCV00 is present.
123	7B	SMF81OP3	1	Binary	Options indicator 3 Bit Meaning when set 0 Tape volume protection is in effect. 1 No duplicate data set names are to be defined 2 DASD volume protection is in effect 3 Record contains version indicator 4 RACROUTE REQUEST=FASTAUTH preprocessing exit routine, ICHRFX01, is active 5 RACROUTE REQUEST=LIST pre- and postprocessing exit routine, ICHRLX01, is active 6 RACROUTE REQUEST=LIST selection exit routine, ICHRLX02, is active 7 RACROUTE REQUEST=DEFINE postprocessing exit routine, ICHRDX02, is active.
124	7C	SMF81AOP	1	Binary	Audit options Bit Meaning when set 0 User class profile changes are being logged 1 Group class profile changes are being logged 2 Data set class profile changes are being logged 3 Tape volume class profile changes are being logged 4 DASD volume class profile changes are being logged 5 Terminal class profile changes are being logged 6 RACF command violations are being logged 7 SPECIAL user activity is being logged.
125	7D	SMF81AO2	1	Binary	Audit options 2 Bit Meaning when set 0 Operation user activity 1 Audit by security level is in effect 2-7 Reserved for IBM's use
126	7E	SMF81TMO	1	Binary	Terminal verification options indicator Bit Meaning when set 0 Terminal authorization checking is in effect 1 Universal access for undefined terminals is NONE; if not set, UACC=READ 2 REALDSN is in effect 3 JES-XBMALLRACF is in effect 4 JES-EARLYVERIFY is in effect 5 JES-BATCHALLRACF is in effect 6 RACROUTE REQUEST=FASTAUTH postprocessing exit routine, ICHRFX02, is active 7 Reserved for IBM's use
127	7F	SMF81PIV	1	Binary	Maximum password interval (0-254).
128	80	SMF81REL	2	Binary	Offset to the first relocate section from the beginning of the record header.
130	82	SMF81CNT	2	Binary	Number of relocate sections.
132	84	SMF81VER	1	Binary	Version indicator (6 = RACF Version 1, Release 7). As of RACF 1.8.1, SMF81VRM is used instead.
133	85	SMF81QL	8	EBCDIC	Single-level data set name.
141	8D	SMF81OP4	1	Binary	Options indicator 4 Bit Meaning when set 0 TAPEDSN is in effect 1 PROTECT-ALL is in effect 2 PROTECT-ALL warning is in effect 3 ERASE-ON-SCRATCH is in effect 4 ERASE-ON-SCRATCH by SECLEVEL is in effect 5 ERASE-ON-SCRATCH for all data sets is in effect 6 Enhanced generic naming is in effect 7 Record contains a version, release, and modification number (see SMF81VRM).
142	8E	SMF81OP5	1	Binary	Options indicator 5 Bit Meaning when set 0 Access control by program is in effect 1 ACEE compression/expansion exit IRRACX01 is active 2 RACROUTE REQUEST=FASTAUTH postprocessing exit ICHRFX04 is active 3 RACROUTE REQUEST=FASTAUTH preprocessing exit ICHRFX03 is active 4 SETROPTS NOADDCREATOR is active 5 IRREVX01 exit is active Note: The IRREVX01 exit point is defined to dynamic exit services. Bit 5 of SMF81OP5 indicates that an exit routine was active for this exit point at the time of the last IPL when the SMF record was written. The status can change either way multiple times throughout the life of the IPL. See the SET PROG operator command in z/OS MVS System Commands and the CSVDYNEX macro in z/OS MVS Programming: Authorized Assembler Services Reference ALE-DYN for more information. 6 ACEE compression/expansion exit IRRACX02 is active 7 Password exit routine, ICHDEX11 is active
143	8F	SMF81RPD	2	Binary	System retention period in effect.
145	91	SMF81SLV	1	Binary	Security level for ERASE-ON-SCRATCH in effect.
146	92	SMF81SLC	1	Binary	Security level for auditing in effect.
147	93	SMF81VRM	4	EBCDIC	FMID for RACF 2020 RACF 2.2 and OS/390 Security Server (RACF) V1 R2 2030 OS/390 Security Server (RACF) V1 R3 2040 OS/390 Security Server (RACF) V2 R4 2060 OS/390 Security Server (RACF) V2 R6 2608 OS/390 Security Server (RACF) V2 R8 7703 OS/390 Security Server (RACF) V2 R10 and z/OS Security Server (RACF) V1 R1 7705 z/OS Security Server (RACF) V1 R2 7706 z/OS Security Server (RACF) V1 R3 7707 z/OS Security Server (RACF) V1 R4 7708 z/OS Security Server (RACF) V1 R5 7709 z/OS Security Server (RACF) V1 R6 7720 z/OS Security Server (RACF) V1 R7 7730 z/OS Security Server (RACF) V1 R8 7740 z/OS Security Server (RACF) V1 R9 7750 z/OS Security Server (RACF) V1 R10 7760 z/OS Security Server (RACF) V1 R11 7770 z/OS Security Server (RACF) V1 R12 7780 z/OS Security Server (RACF) V1 R13 7790 z/OS Security Server (RACF) V2 R1
151	97	SMF81BOP	1	Binary	SETROPTS options. Bit Meaning when set 0 SECLABELCONTROL is in effect 1 CATDSNS is in effect 2 MLQUIET is in effect 3 MLSTABLE is in effect 4 MLS is in effect 5 MLACTIVE is in effect 6 GENERICOWNER is in effect 7 SECLABELAUDIT is in effect.
152	98	SMF81SIN	2	Binary	Partner LU-verification session key interval.
154	9A	SMF81JSY	8	EBCDIC	JES NJE NAME user ID.
162	A2	SMF81JUN	8	EBCDIC	JES UNDEFINEDUSER user ID.
170	AA	SMF81BOX	1	Binary	SETROPTS option extensions. Bit Meaning when set 0 COMPATMODE is in effect 1 CATDSNS failures are in effect 2 MLS failures are in effect 3 MLACTIVE failures are in effect 4 APPLAUDIT in effect 5 Zero (0) equals default RVARY SWITCH password in effect. One (1) equals installation-defined RVARY SWITCH password in effect. 6 Zero (0) equals default RVARY STATUS password in effect. One (1) equals installation-defined RVARY STATUS password in effect. 7 Reserved for IBM's use
171	AB	SMF81PRI	3	EBCDIC	Default primary language for an installation.
172	AC	SMF81SEC	3	EBCDIC	Default secondary language for an installation.
177	B1	SMF81KBL	1	Binary	Level of KERB segment processing in effect.
178	B2	SMF81PMN	1	Signed	Minimum days between password changes
179	B3	SMF81OP6	1	Binary	Options indicator 6 Bit Meaning when set 0 Mixed case passwords 1 New password phrase installation exit is active 2 Field validation exit point (IRRVAF01) for custom fields is active Note: The IRRVAF01 exit point is defined to dynamic exit services. Bit 2 of SMF810P6 indicates that an exit routine was active for this exit point at the time of the last IPL when the SMF record was written. The status can change either way multiple times throughout the life of the IPL. See z/OS Security Server RACF System Programmer's Guide for more information. 3–7 Reserved for IBM's use
180	B4	SMF81ML2	1	Binary	More SETROPTS options Bit Meaning when set 0 MLFSOBJ is active 1 MLIPCOBJ is active 2 MLNAMES is active 3 SECLBYSYSTEM is active 4–7 Reserved for IBM's use
181	B5		74		Reserved for IBM's use
Relocate section:
0	0	SMF81DTP	1	Binary	Data type.
1	1	SMF81DLN	1	Binary	Length of data that follows.
2	2	SMF81DTA	1-255	mixed	Data.