z/OS JES2 Installation Exits
Previous topic
|
Next topic
|
Contents
|
Contact z/OS
|
Library
|
PDF
Register contents when Exit 32 gets control
z/OS JES2 Installation Exits
SA32-0995-00
0
0
1
Pointer to an 12-byte parameter list with the following structure:
Byte 1 (+0)
Type of processing indicator
0
Reserved
4
Request for job by SYSLOG ID
8
Request for job by class
12
TSU
16
STC
Byte 2 (+1)
Condition byte
bits 0-6
These bits are not part of the interface
bit 7
0 – no error occurred during processing (job selectable for execution)
)
1 – error occurred during job select processing (job is to be restarted or terminated)
Byte 3 (+2)
Response byte
bits 0-3
These bits are not part of the interface
bit 4
0 – initiator is not abnormally ended (default)
1 – initiator is abnormally ended, then restarted automatically.
bit 5
0 – initiator is not abnormally ended (default)
1 – initiator is abnormally ended
Note:
If you specify both bits 4 and 5, the initiator is not automatically ended and drained.
The initiator will stop after the job currently being processed has been terminated/queued for RESTART.
This bit is ignored unless the type of processing is a job request by class (R1, byte 1 = 8)
bit 6
0 – select this job (default)
1 – terminate this job
Note:
This bit is ignored if the condition byte (byte 2) is nonzero
bit 7
0 – issue the JES2 job selection ($HASP373) message
1 – suppress the JES2 job selection ($HASP373) message
Note:
This bit is ignored if the condition byte (byte 2) is nonzero
Byte 4 (+3)
This byte is not part of the interface
Byte 5 (+4)
Address of SJB
Byte 9 (+8)
Address of JCT or 0
2-10
N/A
11
Address of HCCT
12
N/A
13
Address of an available save area
14
Return address
15
Entry address
Parent topic:
Exit 32: Subsystem interface (SSI) job selection
Copyright IBM Corporation 1990, 2014