EZZ6080I

Explanation
 The PROFILE Display command.
 Profile and
port divider line information follows each profile/port section. See
message EZZ6050I for details. The last line of this message indicates
how  many lines of data were displayed and how many total lines exist.
See EZZ6052I for details. See message EZZ6060I for definitions of
the table values. See the z/OS Communications Server: IP Configuration
Reference for an explanation of the parameters.
 jobname is
the name of the procedure that is used to start the TN3270 server
or the job name identifier of the procedure that is used to start
the TN3270 server. If you start the TN3270.TNSRV1 server, the jobname value
TNSRV1.  If you start the TN3270 server, the jobname value
is TN3270.
 persis, function, diag, secure, timers,
and misc are connection parameter flags. See EZZ6060I for details.
 source is
the source of the parameter line.  The details of any of these sources
can be seen by issuing a DISPLAY OBJECT, ID=source.
Possible values are: *DEFAULT
Represents the default parameter values set by Telnet.
*TGLOBALS
Represents the parameters set in TELNETGLOBALS.
*TPARMS
Represents the parameters set in TELNETPARMS.
TP-profnum
Represents the merged results of the DEFAULT, TELNETGLOBALS, and
TELNETPARMS parameters. This line is used only on the detailed connection
display and matches the profile displays. Parameter details can be
seen by issuing a DISPLAY PROF, PROF=profnum, DETAIL.
PARMSGROUP names
Represents the parameters set in a PARMSGROUP mapped by PARMSMAP
to the client identifier.
<-FINAL
Represents the merged results of all parms through the PARMSGROUP
level, including any PARMSGROUP mapped by the USERID or USERGRP client
identifier and any parmsgroup mapped on the LUMAP–PMAP combination.

 grp_id is the parameter
group identifier used in the summary displays.
 actual_parm is
the parameter specified showing correct syntax.

System action
 None.

Operator response
 None.

System programmer response
 None.

User response
 Not applicable.

Problem determination
 Not applicable.

Source
 z/OS® Communications
Server TCP/IP: Telnet

Module
 EZAZMTNS

Routing code
 Not specified.

Descriptor code
 (5,8,9)

Example
  See the Display Telnet PROFILE command in z/OS Communications Server: IP System Administrator's
Commands for an example.