A range error occurred.

Truncation of a record occurred during an I/O operation.

The size of the specified record was too small.

A write operation might not immediately follow a read operation.

A read operation might not immediately follow a write operation.

The I/O buffer could not be allocated.

The LRECL or BLKSIZE exceeded the maximum allowable value.

An I/O operation was attempted by using an invalid FILE pointer.

A read operation was attempted on a file that was not opened for reading.

The number of ungetc() push-back characters has exceeded the maximum allowed.

File positioning is not allowed for this data set.

No hiperspace blocks are available for expansion.

An attempt was made to acquire a position that is before the start of the file.

The file position value was beyond the limits that ftell() can represent in a long integer value.

Byte I/O was attempted on a file that was opened for record I/O.

A write operation was attempted on a file that was not opened for writing.

An ungetc() function call cannot immediately follow a write operation.

An unrecoverable error has permanently marked the file in error.

An attempt to allocate memory in the Language Environment® has failed.

The file attributes for open create an invalid combination.

An error occurred while generating a temporary name.

An attempt to back up position has failed.

An attempt was made to close a file that had been opened on another thread.

An I/O function was invoked when a read was pending for a file that had been intercepted.

An error occurred when expanding hiperspace.

The position specified to fseek() was not valid.

A previous I/O error has marked the stream not valid for further I/O processing.

An unrecognized signal value was passed to the signal() or raise() function.

An invalid argument was passed.

An attempt was made to close a stream not belonging to the current main program.

An error was detected in the input string passed to the system() function.

An attempt was made to extend a non-extendable file.

An unsupported buffering mode was specified for the setvbuf() function.

An attempt was made to change the buffering mode after an operation on a file.

The specification of a member is not valid.

The specified ddname was not found.

An error occurred when the system flushed terminal output before retrieving terminal input.

A writable CMS minidisk could not be found to hold the output file specified.

An attempt was made to open a flat file as a PDS.

An error was detected at the system level when opening a file.

A special internally-generated memory file name was specified for opening, but a memory file with this name does not exist.

An attempt was made to open a non-memory file as a memory file.

An error occurred when attempting to erase a CMS file.

The operation attempted could not be performed because the file was open.

The file could not be deleted.

An invalid file name was specified as a function parameter.

A Language Environment internal routine has failed unexpectedly.

The specified file name could not be located.

Unused.

An error occurred when renaming a file.

The application is running with AMODE=24 while the runtime library was installed above the line.

The Language Environment runtime library load module EDCZ24 could not be loaded.

An attempt to override the disposition was ignored. The file might still be removed.

An error occurred trying to remove the file before its expiration date.

Unused.

The open mode string was not valid.

Unused.

An attempt to reposition a VSAM file failed.

An invalid file position was passed to the fsetpos() function.

An error occurred when attempting to define a file to the system.

Unused.

Unused.

A write system error was detected.

A read system error was detected.

An attempt was made to open a nonexistent file for read.

Unused.

Unused.

Unused.

Unused.

Unused.

An attempt was made to open a KSDS or Path VSAM data set without specifying record I/O.

The maximum number of attempts to obtain temporary names was exceeded.

The open parameters were missing the 'type=record' specifier.

Unused.

An fread() was not performed before calling the fdelrec() or fupdate() functions.

An error occurred trying to erase a VSAM record.

The requested operation is valid only for VSAM data sets.

The file was not opened with a 'type=record' specification.

An invalid option was passed to the flocate() function.

Unused.

Unused.

An error occurred attempting to load a module into storage.

The program was not run because of redirection errors on the command line.

Unused.

An unsupported open mode was specified for a PDS member.

The specified file characteristics does not match those of the existing file.

An invalid open mode was specified for the current device.

Open mode is not valid for a SYSIN or SYSOUT dataset.

Unused.

The requested function could not be performed because a system utility failed.

An I/O abend was trapped.

Unused.

An attempt was made to push back the EOF character by using ungetc().

The requested CMS minidisk was not accessed.

Unused.

Unused.

An invalid RECFM was specified when opening a PDS member.

The function specified is not supported under CICS®.

An attempt was made to perform disk file I/O under CICS.

The transient data queue was not enabled for the standard streams.

The transient data queue was not opened for the standard streams.

An attempt was made to map remote queues to the standard streams under CICS.

Unused.

Unused.

An error occurred creating a hiperspace memory file.

An error occurred writing to a hiperspace memory file.

An error occurred reading from a hiperspace memory file.

Unused.

Unused.

Permission denied.

Resource temporarily unavailable.

Bad file descriptor.

Resource busy.

No child processes.

Resource deadlock avoided.

File exists.

Incorrect address.

File too large.

Interrupted function call.

Invalid argument.

Input/output error.

A directory.

Too many open files.

Too many links.

File name too long.

Too many open files in system.

No such device.

No such file or directory.

Exec format error.

No locks available.

Not enough memory.

No space left on device.

Function not implemented.

Not a directory.

Directory not empty.

Inappropriate I/O control operation.

No such device or address.

Operation not permitted.

Broken pipe.

Read-only file system.

Invalid seek.

No such process.

Improper link.

The parameter list is too long, or the message to receive was too large for the buffer.

Too many levels of symbolic links.

Illegal byte sequence.

Unused.

Value Overflow Error.

OpenEdition MVS™ is not active.

Dynamic allocation error.

Catalog Volume Access Facility error.

Catalog obtain error.

Unused.

Unused.

Process initialization error.

An internal error has occurred.

Bad parameters were passed to the service.

The Physical File System encountered a permanent file error.

Bad character in environment variable name.

Unused.

The Physical File System encountered a system error.

SAF/RACF extract error.

SAF/RACF error.

System TOD clock not set.

Access mode argument on function call conflicts with PATHOPTS parameter on JCL DD statement.

Access to the OpenEdition MVS or OpenEdition VM version of the C RTL is denied.

Password has expired.

Password is not valid.

An error was encountered with WLM.

Unused.

The application contains a Language Environment member language that cannot tolerate a fork().

The Language Environment message file was not found in the hierarchical file system.

DLL facilities are not supported under SPC environment.

DLL facilities are not supported under POSIX environment.

Not enough storage to load DLL module.

DLL module not found.

DLL module name too long.

Load request for DLL load module unsuccessful.

dllHandle supplied to the dllqueryvar() function is not available for use.

No variables exported from this dllHandle.

Requested variable not found in this DLL.

DLL load module does not contain a fixed writeable area.

dllHandle supplied to dllqueryfn() function is not available for use.

No functions exported from this dllHandle.

Requested function not found in this DLL.

Not enough storage available for fixed writeable area.

dllHandle supplied is NULL.

No DLLs to be freed.

Logical delete performed, but the DLL is not physically deleted.

Unused.

Invalid dllHandle.

Load request for DLL not supported while running C++ destructors.

IOStreams do not support Record Mode I/O.

Too many characters.

Singularity: log((0,0)).

DLL function is not allowed because destructors are running for the DLL.

A load of DLL from the HFS failed.

Buffer is not long enough to contain a path definition.

The file referred to is an external link.

No path definition for ddname in effect.

ESM error.

CP or the external security manager had an error.

The function failed because it was invoked from a multithread environment.

The linkage of the specified locale doesn't match the current runtime environment.

The DLL cannot be loaded because it does not contain a CEESTART CSECT.

The fetched executable does not contain a fetchable entry point.

The fetched executable was compiled XPLINK but the XPLINK environment is not active.

The DLL was not found in an authorized library.

Not enough storage to fetch module.

Fetched module not found.

Fetched module name too long.

Load request for fetch load module unsuccessful.

The fetched module was not found in an authorized library.

A bad socket-call constant was found in the IUCV header.

An error was found in the IUCV header.

A socket descriptor is out of range.

A socket descriptor is in use.

Request failed because of an IUCV error.

Offload box error.

Offload box restarted.

Offload box down.

Already a conflicting call outstanding on socket.

Request canceled by using a SOCKcallCANCEL request.

Unused.

A name of a PFS was specified that either is not configured or is not a Sockets PFS.

Unused.

Block device required.

Text file busy.

Operation would block.

Operation now in progress.

Connection already in progress.

Socket operation on non-socket.

Destination address required.

Message too long.

Protocol wrong type for socket.

Protocol not available.

Protocol not supported.

Socket type not supported.

Operation not supported on socket.

Protocol family not supported.

Address family not supported.

Address already in use.

Address not available.

Network is down.

Network is unreachable.

Network dropped connection on reset.

Connection ended abnormally.

Connection reset.

No buffer space available.

Socket already connected.

Socket not connected.

Cannot send after socket shutdown.

Too many references; cannot splice.

Connection timed out.

Connection refused.

Host is not available.

Host cannot be reached.

Too many processes.

Too many users.

Disk quota exceeded.

Stale file handle.

Unused.

File is not a STREAM.

STREAMS ioctl() timeout.

No STREAMS resources.

The message identified by set_id and msg_id is not in the message catalog.

Bad message.

Identifier removed.

Unused.

Unused.

The link has been severed.

Unused.

Protocol error.

Multihop not allowed.

Unused.

Function call was interrupted before any data was received.

Socket reuse is not supported.