An internal error has occurred. setWMQApi can only be called for unit testing.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1000E
Unable to convert parameter ''<insert_0>'' to UTF-8 encoding.
Severity
20 : Error
Explanation
This message is issued when the given string cannot be converted to UTF-8 encoding.
Response
Reissue command with valid input string.
BFGMQ1001E
At least one of the <insert_0> and <insert_1> parameters must not be empty.
Severity
20 : Error
Explanation
This message is issued when the publish method is invoked with empty values for both Topic and Topic String.
Response
Reissue command with valid parameters.
BFGMQ1002E
An internal error has occurred. The WMQSyncPoint object is being shared between WMQConnection objects.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1003E
An internal error has occurred. The WMQSyncPoint object has already been completed.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1004E
An internal error has occurred. This WMQConnection already has a WMQSyncPoint object that has not been completed.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1005I
An internal error has occurred.
Severity
0 : Information
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1006W
The specified coordination queue manager host name <insert_0> cannot be resolved to an external address. The agent''s presence will not be published.
Severity
10 : Warning
Explanation
The specified coordination queue manager cannot be resolved using DNS. The agent's presence will not be published.
Response
Ensure that the specified host name is valid.
BFGMQ1007W
The coordination queue manager cannot be contacted or has refused a connection attempt. The IBM MQ reason code was <insert_0>. The agent''s presence will not be published.
Severity
10 : Warning
Explanation
The specified coordination queue manager cannot be contacted so the agent's presence will not be published.
Response
Check the IBM MQ documentation for information relating to the specified reason code. Ensure that the coordination queue manager is available and is correctly configured.
BFGMQ1008E
An internal error occurred: <insert_0>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1009I
An internal error has occurred.
Severity
0 : Information
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1010E
An internal error occurred.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1011E
An error occurred while accessing the specified key store: <insert_0>.
Severity
20 : Error
Explanation
The command could not be processed because of an SSL configuration issue relating to the specified key store. This problem prevented the command from being run.
Response
Resolve the problem and rerun the command. Otherwise contact the IBM support center if you need further assistance.
BFGMQ1012E
An error occurred while accessing the specified trust store: <insert_0>.
Severity
20 : Error
Explanation
The command could not be processed because of an SSL configuration issue relating to the specified trust store. This problem prevented the command from being run.
Response
Resolve the problem and rerun the command. Otherwise contact the IBM support center if you need further assistance.
BFGMQ1013E
An error occurred while accessing the specified key store: <insert_0>.
Severity
20 : Error
Explanation
The command could not be processed because of an SSL configuration issue relating to the specified key store. This problem prevented the command from being run.
Response
Resolve the problem and rerun the command. Otherwise contact the IBM support center if you need further assistance.
BFGMQ1014E
An error occurred while accessing the specified trust store: <insert_0>.
Severity
20 : Error
Explanation
The command could not be processed because of an SSL configuration issue relating to the specified trust store. This problem prevented the command from being run.
Response
Resolve the problem and rerun the command. Otherwise contact the IBM support center if you need further assistance.
BFGMQ1015W
A IBM MQ message with message type Report has been received on queue "<insert_0>".
Severity
10 : Warning
Explanation
Report messages are not allowed on MQMFT Queues. The message has been rejected.
Response
No user action is required.
BFGMQ1016W
A IBM MQ message with message type Report has been received on queue "<insert_0>".
Severity
10 : Warning
Explanation
Report messages are not allowed on MQMFT Queues. The message has been rejected.
Response
No user action is required.
BFGMQ1017E
An internal error occurred. Operation ''<insert_0>'' not allowed on a queue list
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1018W
Unable to convert message coded character set identifier ''<insert_0>'' to a known encoding. Exception information: <insert_1>.
Severity
10 : Warning
Explanation
A message was unable to be decoded due to it having an unknown coded character set identifier. UTF-8 encoding will have been assumed but may yield an invalid interpretation of the message; if this is the case then another error will be reported. The cause of this error is likely to be a newer version of IBM MQ being used than the MQMFT version.
Response
To resolve the problem ensure your MQMFT installation is at the latest version. If the problem persists contact the IBM support center.
BFGMQ1019E
The ''<insert_0>'' property has been assigned an incorrect value of ''<insert_1>''. Valid values are ''none'' or ''java''. The default value of ''none'' will be used.
Severity
20 : Error
Explanation
An incorrect value has been assigned to the specified property. The process will continue, but will use the specified default value.
Response
Correct the value assigned to the specified property so that it is one of the valid values specified.
BFGMQ1020E
Unable to parse the MQRC override property ''<insert_0>''. Failed to interpret ''<insert_1>''.
Severity
20 : Error
Explanation
An incorrect value has been assigned to the MQRC override property. The process will continue, but at least part of the MQRC override property will be ignored.
Response
Correct the value assigned to the MQRC override property.
BFGMQ1021E
MQPUT to <insert_0> failed as the message size of <insert_1> exceeds the maximum that was negotiated for the channel.
Severity
20 : Error
Explanation
Either the IBM MQ channel configuration has specified too small a maximum message size or the advanced agent size properties resulted in too large a message being generated.
Response
Either alter the IBM MQ channel configuration to ensure the maximum message size is big enough to accommodate the message being sent, or alter the advanced agent size properties so that a smaller message is generated.
BFGMQ1022E
An error occurred while configuring a FIPS enabled provider: <insert_0>.
Severity
20 : Error
Explanation
The command could not be processed because of an SSL configuration issue relating to the configuration of the FIPS enabled provider. This problem prevented the command from being run. The cause is likely down to no IBM JSSE support included in the JVM in use.
Response
Ensure a JVM with IBM JSSE support is used. Otherwise contact the IBM support center if you need further assistance.
BFGMQ1023E
A FIPS enabled provider has been requested on an unsupported platform.
Severity
20 : Error
Explanation
The command could not be processed because FIPS has been requested on a platform that does not support it.
Response
Disable the SSL FIPS property.
BFGMQ1024I
The coordination queue manager cannot be contacted or has refused a connection attempt. The IBM MQ reason code was <insert_0> and diagnostic message code was <insert_1>. The agent''s presence will not be published.
Severity
0 : Information
Explanation
The specified coordination queue manager cannot be contacted so the agent's presence will not be published.
Response
Check the IBM MQ documentation for information relating to the specified reason code. Ensure that the coordination queue manager is available and is correctly configured.
BFGMQ1025E
Internal error: the associated IBM MQ command 'dspmqver' does not specify its installation name.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1026E
Internal error: the associated IBM MQ command 'dspmqver' does not specify its IBM MQ configuration data path.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1027I
The topic queue <insert_0> could not be located on the coordination queue manager. The IBM MQ reason code was <insert_1>. The agent''s presence will not be published.
Severity
0 : Information
Explanation
The specified coordination queue manager has not been correctly configured and so the agent's presence will not be published.
Response
Ensure that the coordination queue manager has been correctly configured using the MQSC scripts produced by the fteSetupCoordination command.
BFGMQ1029E
The environment variable BFG_DATA is not present but is required to define the location of the MQMFT data and configuration.
Severity
20 : Error
Explanation
An attempt to run an MQMFT command failed because the required data and configuration information should be specified in the environment variable BFG_DATA but this variable cannot be located.
Response
Refer to the information center and define the BFG_DATA environment variable to reference the relevant data and configuration.
BFGMQ1030E
The data directory ''<insert_1>'' specified in the environment variable <insert_0> does not exist or is not a directory.
Severity
20 : Error
Explanation
An attempt to run an MQMFT command has failed because the MQMFT data directory specified in the environment variable BFG_DATA or FTE_CONFIG does not reference an existing directory.
Response
Ensure that the value in the BFG_DATA or FTE_CONFIG environment variable references an existing directory.
BFGMQ1031E
The environment variable <insert_0> references data directory <insert_1>, which does not have the correct configuration because ''<insert_2>'' cannot be located.
Severity
20 : Error
Explanation
An attempt to run an MQMFT command has failed because the MQMFT data directory specified in the environment variable BFG_DATA or FTE_CONFIG does not reference an MQMFT data configuration.
Response
Ensure that the value in the BFG_DATA or FTE_CONFIG environment variable is referencing the correct MQMFT data configuration and that configuration is complete as specified in the product information center.
BFGMQ1032E
The environment variable <insert_0> references <insert_1> which exists but is not a directory.
Severity
20 : Error
Explanation
The MQMFT data path must be a directory.
Response
Either delete the referenced MQMFT data path, or set the BFG_DATA or FTE_CONFIG environment variable to reference an existing directory that does not contain mqft or that contains an mqft that is a directory.
BFGMQ1033E
The current user is unable to access the MQMFT data directory ''<insert_1>'' as referenced by environment variable <insert_0>.
Severity
20 : Error
Explanation
The MQMFT data directory does not have write access for the current user, and cannot be used.
Response
Change the permissions of the MQMFT data directory to be writable by the current user. Alternatively, change the setting of the BFG_DATA or FTE_CONFIG environment variable to reference a writable empty directory, or a directory that contains a writable mqft subdirectory.
BFGMQ1034E
The attempt to create directory <insert_1> as referenced by environment variable <insert_0> was not successful.
Severity
20 : Error
Explanation
The command could not complete successfully because the specified directory could not be created. The current user might not have permission to create a directory under the specified parent directory.
Response
Check that the user has permission to create a directory under the specified parent directory.
BFGMQ1035E
Failed to set file permissions for directory <insert_1> as referenced by environment variable <insert_0> for reason: <insert_2>.
Severity
20 : Error
Explanation
The file permissions could not be set for the reason given.
Response
Examine the reason given and correct the problem if possible. If the problem persists, contact the IBM support center.
BFGMQ1036E
The environment variable <insert_0> references data directory <insert_1>, which does not have the correct configuration because ''<insert_2>'' cannot be read.
Severity
20 : Error
Explanation
An attempt to run an MQMFT command has failed because the MQMFT data directory specified in the environment variable BFG_DATA or FTE_CONFIG does not reference an MQMFT data configuration.
Response
Ensure that the value in the BFG_DATA or FTE_CONFIG environment variable is referencing the correct MQMFT data configuration and that configuration is complete and accessible for the user as specified in the product information center.
BFGMQ1037E
The environment variable <insert_0> references data directory <insert_1>, which does not have the correct configuration because ''<insert_2>'' is a file when a directory was expected.
Severity
20 : Error
Explanation
An attempt to run an MQMFT command has failed because the MQMFT data directory specified in the environment variable BFG_DATA or FTE_CONFIG does not reference an MQMFT data configuration.
Response
Ensure that the value in the BFG_DATA or FTE_CONFIG environment variable is referencing the correct MQMFT data configuration and that configuration is complete as specified in the product information center.
BFGMQ1038E
The environment variable <insert_0> references data directory <insert_1>, which does not have the correct configuration because ''<insert_2>'' is a directory when a file was expected.
Severity
20 : Error
Explanation
An attempt to run an MQMFT command has failed because the MQMFT data directory specified in the environment variable BFG_DATA or FTE_CONFIG does not reference an MQMFT data configuration.
Response
Ensure that the value in the BFG_DATA or FTE_CONFIG environment variable is referencing the correct MQMFT data configuration and that configuration is complete as specified in the product information center.
BFGMQ1039E
Cannot interpret the content of a message that is encoded using character set identifier ''<insert_0>'' (encoding: ''<insert_1>''). Reason: <insert_2>
Severity
20 : Error
Explanation
Cannot interpret the content of a message encoded with the specified character set identifier because the character set identifier is not supported. The message will not be processed. The character set identifier associated with a message is set by the program that produces the message. The character set identifier can also be changed by IBM MQ, for example by routing the message using IBM MQ channels that perform data conversion.
Response
Determine the reason that the Coded Character Set Identifier field of IBM MQ Message Descriptor has been set to the specified value. Resolve this issue to ensure that the Coded Character Set Identifier is not changed or is only changed to a value that is supported by the agent. If required, refer to the IBM MQ Managed File Transfer product documentation to determine the character sets that an agent process supports.
BFGMQ1040E
Unable to convert the character set ''<insert_0>'' to a coded character set ID. Reason: <insert_1>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGMQ1041E
An attempt to connect to queue manager ''<insert_0>'' with user ID ''<insert_1>'' has been rejected because of invalid authentication details. Valid user ID and password details must be supplied in the credentials file.
Severity
20 : Error
Explanation
The attempted connection to the queue manager has failed with an MQRC 2035. This indicates the connection has been rejected because of invalid authentication details and the command cannot be completed.
Response
Check the required authentication for connection to this queue manager before attempting this command again. Refer to the IBM MQ product documentation for more information on this subject.
BFGMQ1042E
An attempt to publish agent information on SYSTEM.FTE topic has been rejected because user ID ''<insert_0>'' has insufficient authority.
Severity
20 : Error
Explanation
The publish attempt on SYSTEM.FTE topic has failed with an MQRC 2035. This indicates the publication has been rejected because of insufficient authority and the command cannot be completed.
Response
Check if the user has required publish authority on SYSTEM.FTE topic before attempting this command again. Refer to the IBM MQ product documentation for more information on this subject.
BFGMQ1043W
An attempt to publish agent''s presence to the coordination queue manager failed. The IBM MQ reason code was ''<insert_0>''.
Severity
10 : Warning
Explanation
The publish attempt on SYSTEM.FTE topic has failed so the agent's presence will not be published.
Response
Check the IBM MQ documentation for information relating to the specified reason code. Ensure that the coordination queue manager is correctly configured.
BFGMQ1044E
Agent client connection on z/OS must be to a queue manager on z/OS
Severity
20 : Error
Explanation
Agent running on z/OS attempted a client connection to a queue manager running on a different platform. This is not allowed.
Response
Update the agent configuration to connect to a queue manager running on z/OS.
BFGMQ1045I
Agent''s system queue ''<insert_0>'' is configured as either NOSHARE or DEFSOPT(EXCL).
Severity
0 : Information
Explanation
Agent's system queue is configured as NOSHARE or default input open option as Exclusive.Agent's system queues must be configured as SHARE and DEFSOPT(SHARED).
Response
Stop the agent, ensure that agent's system queue is configured as SHARE and DEFSOPT(EXCL)and restart agent.
BFGMQ1046I
Fetching messages from subscription to topic string ''<insert_0>''. Number of messages received: ''<insert_1>''.
Severity
0 : Information
Explanation
This message shows the number of messages received by the current command from the coordination queue manager.
Response
No action is required.
BFGMQ9999E
<insert_0>
Severity
20 : Error
Explanation
If this message does not give enough information, check the accompanying error messages for further information.
Response
For further information on resolving this error, see the problem determination information on the product web site.