IBM Spectrum Protect recovery agent messages
This information contains explanations and suggested actions for messages issued by the recovery agent.
Beginning with Version 8.1, recovery agent messages contain the IBM Spectrum Protect™ product name where the product is referenced in the message. This change is not reflected in the documented messages, which still contain the product name Tivoli Storage Manager.
- FBP0001E
The Recovery Agent is already running. - FBP0002E
The Tivoli Storage Manager server connection cannot be removed. - FBP0003E
'Authentication node' and 'Target node' cannot specify the same node. - FBP0004E
Recovery Agent failed to mount. - FBP0005E
RAID mirror status was not obtained. - FBP0006E
Incorrect parameters were specified during the Recovery Agent mount operation. - FBP0007E
The selected snapshot is already mounted. - FBP0010E
Failed to dismount. - FBP0011E
The node data was not retrieved. - FBP0012E
Tivoli Storage Manager server snapshots were not found. - FBP0013E
The snapshot was not found. Click 'Refresh'. - FBP0016E
Invalid parameters were specified. - FBP0017E
The mdadm version is not supported. - FBP0018E
The mdadm utility was not found. - FBP0019E
The iscsiadm version is not supported. - FBP0020E
The iscsiadm utility was not found. - FBP0021E
The lsscsi version is not supported. - FBP0022E
The lsscsi utility was not found. - FBP0023E
The Secure Shell (SSH) version is not supported. - FBP0024E
The Secure Shell (SSH) was not found. - FBP0025E
Not all instant restore sessions were stopped. - FBP0026E
Failed to read instant restore session. - FBP0027E
Mount session already exists. - FBP0028E
Failed to create the mount sessions directory. - FBP0029E
Failed to encrypt node credentials. - FBP0030E
Failed to decrypt node credentials. - FBP0031E
Failed to remove mount session. - FBP0032E
Instant restore session already exists. - FBP0033E
Failed to create the instant restore sessions directory. - FBP0034E
Failed to remove the instant restore session. - FBP0035E
Failed to read from the configuration file that is used for mount and instant restore operations. - FBP0036E
Failed to write to the configuration file that is used for mount and instant restore operations. - FBP0037E
Failed to read from the configuration file section that is used for mount and instant restore operations. - FBP0038E
Failed to write to the configuration file section that is used for mount and instant restore operations. - FBP0039E
Failed to unmount. Device is busy. - FBP0040E
Not all mount sessions were unmounted. - FBP0041E
Failed to retrieve data from the Recovery Agent CLI. - FBP0042E
Failed to parse data from the Recovery Agent CLI. - FBP0043E
Failed to create query for the Recovery Agent CLI. - FBP0044E
Failed to retrieve mount data from the Recovery Agent CLI. - FBP0045E
Failed to create mount query for the Recovery Agent CLI. - FBP0046E
Failed to connect to the Recovery Agent CLI. - FBP0047E
Failed to create the mount directory. - FBP0048E
Failed to mount the file system of the snapshot. - FBP0049E
Failed to set the SSH server address. - FBP0050E
Failed to set SSH user name. - FBP0051E
Failed to run SSH command. - FBP0052E
Failed to send query to the TDPVMware Shell. - FBP0053E
Failed to send query to the Recovery Agent CLI. - FBP0056E
Failed to locate the block device specified for the mount point. - FBP0057E
Failed to locate the mount point for the specified block device. - FBP0058E
The specified mount point is not mounted on the block device. - FBP0059E
Restore is not allowed to '/' or '/boot'. - FBP0060E
Restore is not allowed to RAID devices. - FBP0061E
The restore operation failed to start. - FBP0062E
Failed to get the iSCSI initiator name. - FBP0063E
iSCSI target is not logged in. - FBP0064E
Failed to resolve the IP address to a hostname. - FBP0065E
The iSCSI service was not found. - FBP0066E
Failed to start the iSCSI daemon. - FBP0067E
Failed to discover iSCSI targets. - FBP0068E
Failed to log in to the iSCSI target. - FBP0069E
Failed to log out of the iSCSI target. - FBP0070E
Failed to delete the iSCSI target. - FBP0071E
Failed to identify the block device for the iSCSI target. - FBP0072E
Failed to create the RAID mirror device. - FBP0073E
Failed to stop the RAID mirror device. - FBP0074E
Failed to add the target block device to the RAID mirror. - FBP0075E
Failed to mark the target block device in RAID mirror as faulty. - FBP0076E
Failed to remove the target block device from the RAID mirror. - FBP0079E
Unknown key. - FBP0080E
The operation timed-out. - FBP0081E
Internal error. - FBP0083E
The snapshot does not contain a partition with a supported file system. - FBP0084E
Failed to retrieve partitions. - FBP0085E
Recovery Agent can connect only to a Tivoli Storage Manager server node. - FBP0086E
Failed to remove the Tivoli Storage Manager server connection. - FBP0088E
Mount operation failed because the Write cache is either full or configured incorrectly. - FBP0089E
The Recovery Agent GUI storage type option is 'Tape', and the requested media is busy. - FBP0090E
Operation timed-out. Manual intervention might be required. - FBP0091E
The selected disk is not an MBR disk. - FBP0092E
Operation failed. Recovery Agent is initializing. - FBP0093E
The mount point is already in use by another mount session. - FBP0094E
The mount point is already in use by another instant restore session. - FBP1001I
The folder:folder pathdoes not exist. Do you want to create the folder? - FBP1003I
Specify a folder for the cache files - FBP1005I
mount path already has a mounted virtual volume.Do you want to dismount the volume before you continue? - FBP1008I
Recovery Agent cannot be started because it is being used by another user - FBP1009I
Recovery Agent cannot be closed while mounted volumes exist. Do you want to dismount all volumes? - FBP1011I
The Virtual Volume Driver was registered successfully - FBP1013I
Connection to Tivoli Storage Manager server resumed. - FBP1014I
You must restart the Recovery Agent application for changes to the Data Access options to take effect. - FBP1100I
Received CONTINUE from service manager - FBP1101I
Received PAUSE from service manager - FBP1102I
Received a STOP command from the service manager - FBP1103I
Service stopped, reporting to service manager - FBP1104I
--- Recovery Agent version string started --- - FBP1300I
License is OK. - FBP1301W
Not for resale license. - FBP1302E
Error accessing license file. - FBP1303E
Corrupted license file. - FBP1304E
Trial period has expired. - FBP1305I
Try and buy license. days left. - FBP5003W
target volume : The repository is not loaded.Load the repository and resume the session. - FBP5005W
Windows indicates the destination volume target volume might be a network-mapped drive. If volume target volume again is confirmed as a network-mapped drive, the operation fails. Continue anyway? - FBP5007W
Read block from the source has failedThe problem might have been caused by a network failure.See log file for more details.If the problem was caused by a network failure,correct the problem and resume the session. - FBP5008W
There are open handles to the volume being restored (volume name).Close any application (such as Windows Explorer or a command prompt) that might be accessing this volume and try again.If you select Ignore, applications using these handles might become unstable once the restore process begins. - FBP5010W
System is low on memory.Write operations to virtual volumes might be lost. - FBP5011W
Recovery Agent still has number of mounted volumes volumes mounted. Stopping the Recovery Agent might cause the system to become unstable. Are you sure you want to stop the Recovery Agent? - FBP5012W
The Recovery Agent still has number of active sessions active instant restore session. These sessions will be paused and the restored volumes will appear unformatted, until the Recovery Agent service restarts.Are you sure you want to stop the Recovery Agent? - FBP5013W
Abort selected sessions?All data is lost and volumes require reformatting. - FBP5015W
All data on target drive volume name will be lost. Note 1: Successful instant restore processing requires sufficient network connectivity and bandwidth to the repository. Note 2: Use of instant restore is recommended only for applications that primarily issue READ I/O's.Do you want to continue? - FBP5017W
There are open files on the volume mounted on:mounted volume name.A forced dismount invalidates all of the open files.Are you sure you want to continue? - FBP5018W
The volume selected for restore is located on a clustered disk.See the product documentation for guidelines when restoring clustered volumes.Failure to follow these guidelines might result in data loss, if a hardware or Windows error occurs.Do you want to continue? - FBP5020W
The Virtual Volume Driver is not yet registered. Recovery Agent can register the driver now. During registration, a Microsoft Windows Logo warning may be displayed. Accept this warning to allow the registration to complete.Do you want to register the Virtual Volume Driver now? - FBP5021W
The mounted volume 'mounted volume name' is in use.Dismounting the volume might cause the application that is using it to become unstable.Do you want to continue? - FBP5023W
There are active instant restore sessions.These sessions will be paused and the restored volumes will appear unformatted, until the application finishes loading and resumes the sessions.Do you want to continue? - FBP5025W
There are 'num active sessions' sessions using the write cache. Updates to the cache settings are processed when there are no active sessions that use the cache. Do you want to continue? - FBP5026W
The size of the write cache is num write cache percentage% full. - FBP5028W
The file system of the selected partition (partition format) might not be supported by the current operating system.The appropriate File System driver must be installed for Windows to read the volume.Do you want to continue? - FBP5029W
The connection to Tivoli Storage Manager server was lost. - FBP5030W
No snapshots are available for the selected virtual machine. Or, the Authentication node is not authorized to restore this virtual machine. - FBP5031W
Some snapshots are currently mounted. If you continue, these snapshots will be dismounted.If a mounted volume is currently being used by an application, the application might become unstable.Do you want to continue? - FBP5032W
The selected snapshot will not be protected from expiration during this operation. See the product documentation for information about expiration. - FBP5033W
No snapshots exist in the selected node. - FBP5034W
The snapshots are not protected from expiration during the mount operation. An expiration can produce unexpected results and negatively impact the mount point. - FBP5035W
The selected snapshot is not protected from expiration during this mount operation. An expiration can produce unexpected results and negatively impact the mount point. - FBP7003E
The folder:folder name is invalid. - FBP7004E
The folder:folder name could not be created. - FBP7005E
folder name is not empty.Only empty folders can be used as a mount point. - FBP7006E
snapshot size (snapshot size) is larger than target size (partition name) - FBP7007E
A valid iSCSI target name must be specified. Valid iSCSI names consist of the following items: lower-case English characters, digits, '.', ':' and '-'. - FBP7008E
A valid iSCSI initiator name must be specified. Valid iSCSI names consist of the following items: lower-case English characters, digits, '.', ':' and '-'. - FBP7009E
A valid folder name must be specified. - FBP7012E
Already connected to a Tivoli Storage Manager server.To connect to a different server, or to a different node within the server, select the current server from the list and click 'Remove'. - FBP7013E
Instant restore is not supported in Tape Mode. - FBP7014E
Cannot mount more than one snapshot in Tape Mode. - FBP7015E
No local volume is available as a destination for instant restore. - FBP7016E
The Recovery Agent 'Read Ahead size' option requires a value of 0 through 8192. - FBP7017E
The Recovery Agent 'Read Ahead cache size' option requires a value of 1000 through 75000. The value must also be at least 1 block larger than the value of the 'Read Ahead size' option. - FBP7018E
The Recovery Agent cannot read the snapshot data from the Tivoli Storage Manager server. Make sure that the storage type setting matches the actual storage device. For example, if the data resides on tape, make sure that the storage type is set to 'Tape'. If this does not solve the problem, check the Tivoli Storage Manager server activity log for additional errors. - FBP7019E
The selected disk is not a basic disk with an MBR partition style. - FBP7020E
The partitions in the selected disk are not formatted with a supported file system. - FBP7021E
Select the node access method. - FBP7022E
You must specify a Tivoli Storage Manager server name or IP. - FBP7023E
You must specify a valid Tivoli Storage Manager Server port. - FBP7024E
You must specify an authentication node. - FBP7025E
You must specify a target node. - FBP7026E
You must specify a node password. - FBP7027E
The Recovery Agent 'Driver timeout' option requires a value of 60 through 300. - FBP7028E
The Recovery Agent 'Write cache size' option requires a value of 1 through upper limit - FBP7029E
The Recovery Agent CLI mount command is missing one or more required parameters. - FBP7030E
Repository 'repository name' was not found - FBP7031E
A valid iSCSI target name must be specified. Valid iSCSI names consist of the following items: lower-case English characters, digits, '.', ':' and '-'. - FBP7032E
Mount target 'mount target' is not valid. - FBP7033E
Reparse point 'reparse point' was not found and cannot be created - FBP7035E
Failed to load partition 'partition' - FBP7036E
Incorrect partition number 'partition number' - FBP7037E
'Cache size' must be at least 1GB. - FBP7038E
The value of the Recovery Agent write 'Cache size' option must not exceed max size in GBGB - FBP8001E
resume failed - FBP8002E
failed to mount because of too many mount points - FBP8003E
failed to dismount mounted volume name - FBP8004E
failed to load repository name - FBP8007E
Virtual Volume Driver not enabled - FBP8008E
snapshot not found. - FBP8009E
already mounted - FBP8012E
target is a network-mapped drive - FBP8015E
volume letter is in use. Select another - FBP8016E
failed to mount - FBP8019E
failed to stop - FBP8020E
failed to finalize the session - FBP8023E
target partition is too small - FBP8024E
load repository repository name failed: error message - FBP8025E
repository inaccessible. Dismounting volume - FBP8026E
'path to repository' inaccessible or not a repository - FBP8027E
failed to open repository - FBP8029E
session stopped by user - FBP8031E
Exclusive access to the mounted snapshot was not obtained on the Tivoli Storage Manager server. - FBP8032E
failed to unmount volume - FBP8033E
failed to restore blocks - FBP8034E
failed to mount volume - FBP8036E
Failed to finalize - FBP8037E
initialization failed. See logs for the reason - FBP8041E
cannot restore to a dynamic disk - FBP8042E
cannot restore to clustered disk - FBP8043E
failed to create bitmap - FBP8044E
failed to scramble first block - FBP8045E
failed to notify driver - FBP8046E
failed to unscramble first block - FBP8047E
cannot restore to a FAT volume. Format target volume as NTFS - FBP8048E
session not responding - FBP8050E
failed to create first block file - FBP8051E
cannot restore to disk with signature '0' - FBP8052E
Recovery Agent is currently initializing. - FBP8053E
failed to read data from server - FBP9000E
failed connecting to a kernel driver - FBP9001E
Incompatible Virtual Volume Driver (FBVV) Version , expecting expected major version.expected minor version , installed installed major version.installed minor version - FBP9002E
Cannot initialize Windows Sockets. - FBP9003E
Cannot obtain the application data directory path - FBP9004E
Cannot create directory directory name - FBP9005E
failed to initialize module name module - FBP9006E
another instance of Recovery Agent is already running - FBP9007E
unable to install the Recovery Agent - FBP9008E
Cannot get folder name for AFS.dll - FBP9009E
Registration of Virtual Volume Driver failed .Check the file file name\\installFBVV.log for more information Do you want to retry registering the Virtual Volume Driver? - FBP9010E
Write Cache is full.