/RMxxxxxx commands
The /RMxxxxxx commands are multisegment commands that call functions of IMS™ Database Recovery Control (DBRC). Each /RMxxxxxx command is an online version of the corresponding batch DBRC command.
The following table lists the DBRC commands that are
supported online and describes the utility function of each command:
| Command | Utility function |
|---|---|
| /RMCHANGE | Changes or modifies information in the RECON data set |
| /RMDELETE | Deletes information in the RECON data set |
| /RMGENJCL | Generates JCL for:
|
| /RMINIT | Creates records in the DBRC RECON data set |
| /RMLIST | Lists information contained in the RECON data set |
| /RMNOTIFY | Notifies DBRC about additional information, which gets recorded in the RECON data set. |
These commands enable the IMS master terminal operator or an authorized terminal operator to run certain DBRC utility functions online. For any /RMxxxxxx commands other than /RMLIST, output is limited to what can be put in a 4 KB buffer. For the /RMLIST command that is issued from non-OM API (for example, IMS terminals or master terminals), output is limited to 32 KB. There is no limit to the output generated and returned by the /RMLIST command issued from OM API.
Subsections:
Environment
The following table lists the environments (DB/DC, DBCTL, and DCCTL) from which the command and keyword can be issued.
| Command / Keyword | DB/DC | DBCTL | DCCTL |
|---|---|---|---|
| /RMxxxxxx | X | X | X |
| LTERM | X | X |
Syntax
>>-+-+-/RMCHANGE-+-+--+------------------+----------------------> | '-/RMC------' | '-LTERM--ltermname-' +-+-/RMDELETE-+-+ | '-/RMD------' | +-+-/RMGENJCL-+-+ | '-/RMG------' | +-+-/RMINIT-+---+ | '-/RMI----' | +-+-/RMLIST-+---+ | '-/RML----' | '-+-/RMNOTIFY-+-' '-/RMN------' >--DBRC='modifier parameter_set'-------------------------------><
Keywords
The following keywords are valid for the /RMxxxxxx command:
- LTERM ltermname
- Specifies the
logical terminal designated for output. If you omit the LTERM keyword,
the output destination is the input terminal. Recommendation: Because some of the DBRC commands generate a large amount of output, especially the /RMGENJCL and /RMLIST commands, direct the output to a printer.
- DBRC='modifier parameter_set'
- Specifies the DBRC modifier for the function specified and the
parameters that will be passed to DBRC. The DBRC= parameter is required
on all /RMxxxxxx commands.
- modifier
- The DBRC modifier for the function specified. The following table
lists the DBRC modifiers and the /RMxxxxxx commands
with which the modifiers can be issued.
Table 3. DBRC modifiers for the /RMxxxxxx commands Modifier /RMxxxxxx commands CHANGE DELETE GENJCL INIT LIST NOTIFY ADS X X X ALLOC X X ARCHIVE X BKOUT X X X X CA X X X X X CAGRP X X X X CLOSE X DB X X X X DBDS X X X X DBDSGRP X X X X GSG X X X HISTORY X IC X X X X X LOG X X OIC X PART X PRILOG X X RECON X X RECOV X X X REORG X X SECLOG X X SG X X X SUBSYS X X X X UIC X X X USER X - parameter_set
- Represents the required and optional parameters that will be passed
to DBRC. For an explanation of the values that can be specified, see
the corresponding command. For example, if you specify /RMLIST LTERM(ltermname)
DBRC='DBDS parameter_set', see the description
of the LIST.DBDS command to understand what parameters
can be used in place of parameter_set.
Table 4. /RMxxxxx commands and corresponding DBRC commands Command Corresponding DBRC command /RMCHANGE For the parameters that can be issued with the /RMCHANGE command, see CHANGE commands. /RMDELETE For the parameters that can be issued with the /RMDELETE command, see DELETE commands. /RMGENJCL For the parameters that can be issued with the /RMGENJCL command, see GENJCL commands. /RMINIT For the parameters that can be issued with the /RMINIT command, see INIT commands. /RMLIST For the parameters that can be issued with the /RMLIST command, see LIST commands. /RMNOTIFY For the parameters that can be issued with the /RMNOTIFY command, see NOTIFY commands.
Usage notes
All /RMxxxxxx formats require an EOM indication to denote end-of-message. An EOS indication must be included for all segments, if any, that precede the last segment. If comments are included with the /RMxxxxxx commands, they must be enclosed in asterisks.
If a failure other than the loss of both RECON data sets occurs while DBRC is processing an online command, DBRC makes the command unavailable for the remaining time the IMS online region is running. After determining and correcting the cause of the original failure, the command can be made available again by resubmitting the online command with the RESET parameter specified in the parameter set. It is the verb, rather than the modifier, level of the command that DBRC makes unavailable. That is, if a DBRC INIT.DB command fails, DBRC makes all INIT commands unavailable. DBRC sends an error message to the originating terminal when the command fails. You can still issue the failing command from other IMS online regions.
Note: DBRC does not make GENJCL commands
unavailable, because the GENJCL.ARCHIVE command
is needed for automatic archiving.
These commands can be issued to an IMSplex using the Batch SPOC utility.
DBRC does not remember command failures across IMS restarts because it assumes that you will correct the error before restarting IMS.
Examples
The following are examples of the /RMxxxxxx commands:
Examples for /RMCHANGE command
Entry ET (with comments):
/RMCHANGE DBRC='DB DBD(DIVNTZ04) SHARELVL(3)'. *COMMENT*.Response ET:
CHANGE.DB DBD(DIVNTZ04) SHARELVL(3)
DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00
DSP0220I COMMAND COMPLETION TIME
DSP0211I COMMAND PROCESSING COMPLETE
DSP0211I HIGHEST CONDITION CODE = 00
DSP0058I RMC COMMAND COMPLETEDEntry ET:
/RMCHANGE DBRC='DBDS DBD(DIVNTZ04) DDN(DBHVSAM1) ICON'.Response ET:
CHANGE.DBDS DBD(DIVNTZ04) DDN(DIVNTZ04) ICON
DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00
DSP0220I COMMAND COMPLETION TIME
DSP0211I COMMAND PROCESSING COMPLETE
DSP0211I HIGHEST CONDITION CODE = 00
DSP0058I RMC COMMAND COMPLETEDEntry ET:
/RMC DBRC='DBDS DBD(DEDBJN21) AREA(DB21AR7) VSO PREOPEN'.Response ET:
DFS000I CHANGE.DBDS DBD(DEDBJN21) AREA(DB21AR7) VSO PREOPEN
DFS000I DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00Example for /RMDELETE command
Entry ET (with comments):
/RMDELETE DBRC='DB DBD(DIVNTZ04)'. *COMMENT*.Response ET:
DELETE.DB DBD(DIVNTZ04)
DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00
DSP0220I COMMAND COMPLETION TIME
DSP0211I COMMAND PROCESSING COMPLETE
DSP0211I HIGHEST CONDITION CODE = 00
DSP0058I RMD COMMAND COMPLETEDExample for /RMGENJCL command
Entry ET (with comments):
/RMGENJCL LTERM SMITH DBRC='IC DBD(HDAMVSAM) DDN(DD1) LIST'.Response ET:
DSP058I RMG COMMAND COMPLETEDResponse LTERM SMITH:
GENJCL.IC DBD(HDAMVSAM) DDN(DD1)
//IC135607 JOB
//IC EXEC PGM=DFSRRC00,PARM='ULU,DFSUDMP0',REGION=800K
//*
//* THIS JCL ORIGINATES FROM THE USER'S 'JCLPDS' LIBRARY.
//* %KEYWORDS ARE REPLACED BY THE GENJCL FUNCTION OF
//* THE IMS DATABASE RECOVERY CONTROL FEATURE.
//*
//* JCL FOR IMAGE COPY.
//*
//SYSPRINT DD SYSOUT=A
//RECON1 DD DSN=POCONO1,DISP=SHR
//RECON2 DD DSN=POCONO2,DISP=SHR
//IMS DD DSN=IMS.DBDLIB,DISP=SHR
//DD1 DD DSN=HDAMVASM,DCB=BUFNO=10,DISP=OLD
//DATAOUT1 DD DSN=IMS.HDAMVSAM.DD1.IC.ICDD1,UNIT=3400,
// VOL=(PRIVATE,,,1,SER=(******)),
// LABEL=(1,SL),
// DISP=(NEW,KEEP),DCB=BUFNO=10
//DFSVSAMP DD *
1024,2
4096,4
//SYSIN DD *
D1 HDAMVSAM DD1 DATAOUT1
DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00
DSP0220I COMMAND COMPLETION TIME
DSP0211I COMMAND PROCESSING COMPLETE
DSP0211I HIGHEST CONDITION CODE = 00
DSP0058I RMG COMMAND COMPLETEDExample for /RMINIT command
Entry ET (with comments):
/RMINIT DBRC='DB DBD(DIVNTZ04) SHARELVL(3)'. *COMMENT*.Response ET:
INIT.DB DBD(DIVNTZ04) SHARELVL(3)
DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00
DSP0220I COMMAND COMPLETION TIME
DSP0211I COMMAND PROCESSING COMPLETE
DSP0211I HIGHEST CONDITION CODE = 00
DSP0058I RMI COMMAND COMPLETEDExamples for /RMLIST command
Entry ET (with comments):
/RMLIST DBRC='DB DBD(DIVNTZ04)'. *LAST COMMENT*.Response ET for full-function databases:
IMS VERSION 13 RELEASE 1 DATA BASE RECOVERY CONTROL PAGE 0001
LIST.DB DBD(DIVNTZ02)
13.313 11:49:06.100154 LISTING OF RECON PAGE 0002
-------------------------------------------------------------------------------
DB
DBD=DIVNTZ02 IRLMID=*NULL DMB#=1 TYPE=IMS
SHARE LEVEL=3 GSGNAME=**NULL** USID=0000000001
AUTHORIZED USID=0000000000 RECEIVE USID=0000000000 HARD USID=0000000000
RECEIVE NEEDED USID=0000000000
DBRCVGRP=**NULL**
FLAGS: COUNTERS:
BACKOUT NEEDED =OFF RECOVERY NEEDED COUNT =0
READ ONLY =OFF IMAGE COPY NEEDED COUNT =0
PROHIBIT AUTHORIZATION=OFF AUTHORIZED SUBSYSTEMS =0
RECOVERABLE =YES HELD AUTHORIZATION STATE=0
EEQE COUNT =0
TRACKING SUSPENDED =NO RECEIVE REQUIRED COUNT =0
OFR REQUIRED =NO
REORG INTENT =NO
QUIESCE IN PROGRESS =NO
QUIESCE HELD =NO
-------------------------------------------------------------------------------
DSP0180I NUMBER OF RECORDS LISTED IS 1
DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00
DSP0220I COMMAND COMPLETION TIME 13.313 11:49:06.566767
IMS VERSION 13 RELEASE 1 DATA BASE RECOVERY CONTROL PAGE 0003
DSP0211I COMMAND PROCESSING COMPLETE
DSP0211I HIGHEST CONDITION CODE = 00 Response ET for Fast Path databases:
IMS VERSION 13 RELEASE 1 DATA BASE RECOVERY CONTROL PAGE 0001
LIST.DB DBD(DEDBJN22)
13.264 12:10:07.154448 LISTING OF RECON PAGE 0002
-------------------------------------------------------------------------------
DB
DBD=DEDBJN22 DMB#=5 TYPE=FP
SHARE LEVEL=3
FLAGS: COUNTERS:
RECOVERY NEEDED COUNT =0
IMAGE COPY NEEDED COUNT =0
PROHIBIT AUTHORIZATION=ON AUTHORIZED AREAS =0
RECOVERABLE =YES EEQE COUNT =0
FULLSEG DEFAULT =YES
-------------------------------------------------------------------------------
DSP0180I NUMBER OF RECORDS LISTED IS 1
DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00
DSP0220I COMMAND COMPLETION TIME 13.264 12:10:07.484796
IMS VERSION 13 RELEASE 1 DATA BASE RECOVERY CONTROL PAGE 0003
DSP0211I COMMAND PROCESSING COMPLETE
DSP0211I HIGHEST CONDITION CODE = 00Entry ET:
/RMLIST DBRC='DB DBD(DIVNTZ02) DBDS'Response ET for full-function databases:
IMS VERSION 13 RELEASE 1 DATA BASE RECOVERY CONTROL PAGE 0001
LIST.DB DBD(DIVNTZ02) DBDS
13.313 11:49:06.865002 LISTING OF RECON PAGE 0002
-------------------------------------------------------------------------------
DB
DBD=DIVNTZ02 IRLMID=*NULL DMB#=1 TYPE=IMS
SHARE LEVEL=3 GSGNAME=**NULL** USID=0000000001
AUTHORIZED USID=0000000000 RECEIVE USID=0000000000 HARD USID=0000000000
RECEIVE NEEDED USID=0000000000
DBRCVGRP=**NULL**
FLAGS: COUNTERS:
BACKOUT NEEDED =OFF RECOVERY NEEDED COUNT =0
READ ONLY =OFF IMAGE COPY NEEDED COUNT =0
PROHIBIT AUTHORIZATION=OFF AUTHORIZED SUBSYSTEMS =0
RECOVERABLE =YES HELD AUTHORIZATION STATE=0
EEQE COUNT =0
TRACKING SUSPENDED =NO RECEIVE REQUIRED COUNT =0
OFR REQUIRED =NO
REORG INTENT =NO
QUIESCE IN PROGRESS =NO
QUIESCE HELD =NO
-------------------------------------------------------------------------------
13.313 11:49:06.865002 LISTING OF RECON PAGE 0003
-------------------------------------------------------------------------------
DBDS
DSN=IMSTESTL.DIVNTZ02.FJXXS01K TYPE=IMS
DBD=DIVNTZ02 DDN=DBHVSAM1 DSID=001 DBORG=HISAM DSORG=VSAM
CAGRP=**NULL** GENMAX=2 IC AVAIL=0 IC USED=0 DSSN=00000000
NOREUSE RECOVPD=0
DEFLTJCL=**NULL** ICJCL=ICJCL OICJCL=OICJCL RECOVJCL=RECOVJCL
RECVJCL=ICRCVJCL
FLAGS: COUNTERS:
IC NEEDED =OFF
IC RECOMMENDED =ON
RECOV NEEDED =OFF
RECEIVE NEEDED =OFF EEQE COUNT =0
-------------------------------------------------------------------------------
13.313 11:49:06.865002 LISTING OF RECON PAGE 0004
-------------------------------------------------------------------------------
DBDS
DSN=IMSTESTL.DIVNTZ02.FJXXS01E TYPE=IMS
DBD=DIVNTZ02 DDN=DBHVSAM2 DSID=002 DBORG=HISAM DSORG=VSAM
CAGRP=**NULL** GENMAX=2 IC AVAIL=0 IC USED=0 DSSN=00000000
NOREUSE RECOVPD=0
DEFLTJCL=**NULL** ICJCL=ICJCL OICJCL=OICJCL RECOVJCL=RECOVJCL
RECVJCL=ICRCVJCL
FLAGS: COUNTERS:
IC NEEDED =OFF
IC RECOMMENDED =ON
RECOV NEEDED =OFF
RECEIVE NEEDED =OFF EEQE COUNT =0
-------------------------------------------------------------------------------
DSP0180I NUMBER OF RECORDS LISTED IS 3
DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00
DSP0220I COMMAND COMPLETION TIME 13.313 11:49:07.214683
IMS VERSION 13 RELEASE 1 DATA BASE RECOVERY CONTROL PAGE 0005
DSP0211I COMMAND PROCESSING COMPLETE
DSP0211I HIGHEST CONDITION CODE = 00 Response ET for Fast Path databases:
IMS VERSION 13 RELEASE 1 DATA BASE RECOVERY CONTROL PAGE 0001
LIST.DB DBD(DEDBJN22) DBDS
13.264 12:09:15.180282 LISTING OF RECON PAGE 0002
-------------------------------------------------------------------------------
DB
DBD=DEDBJN22 DMB#=5 TYPE=FP
SHARE LEVEL=3
FLAGS: COUNTERS:
RECOVERY NEEDED COUNT =0
IMAGE COPY NEEDED COUNT =0
PROHIBIT AUTHORIZATION=ON AUTHORIZED AREAS =0
RECOVERABLE =YES EEQE COUNT =0
FULLSEG DEFAULT =YES
-------------------------------------------------------------------------------
13.264 12:09:15.180282 LISTING OF RECON PAGE 0003
-------------------------------------------------------------------------------
DBDS
DBD=DEDBJN22 AREA=DB22AR0 TYPE=FP
SHARE LEVEL=3 DSID=00001 DBORG=DEDB DSORG=VSAM
GSGNAME=**NULL** USID=0000000003
AUTHORIZED USID=0000000003 RECEIVE USID=0000000003 HARD USID=0000000003
RECEIVE NEEDED USID=0000000000
CAGRP=**NULL** GENMAX=2 IC AVAIL=0 IC USED=0 DSSN=00000002
NOREUSE RECOVPD=0 NOVSO NOPREOPEN NOPRELOAD NOFULLSG
CFSTR1=**NULL** CFSTR2=**NULL** NOLKASID NOMAS
DEFLTJCL=**NULL** ICJCL=ICJCL RECVJCL=ICRCVJCL RECOVJCL=RECOVJCL
DBRCVGRP=**NULL**
FLAGS: COUNTERS:
PROHIBIT AUTHORIZATION=ON AUTHORIZED SUBSYSTEMS =0
HELD AUTHORIZATION STATE=0
IC NEEDED =OFF ADS AVAIL # =1
IC RECOMMENDED =ON
RECOV NEEDED =OFF REGISTERED ADS # =1
EEQE COUNT =0
RECEIVE NEEDED =OFF
OFR REQUIRED =NO
TRACKING SUSPENDED =NO
HSSP CIC IN PROGRESS =NO
QUIESCE IN PROGRESS =NO
QUIESCE HELD =NO
ADS LIST:
CREATE
-ADS DDN--ADS DSN- -STAT- -RUNNING-
DB22AR0 IMSTESTL.DB22AR0 AVAIL NO
-------------------------------------------------------------------------------
ALLOC
ALLOC =13.264 11:58:28.277601 * ALLOC LRID =0000000000000000
DSSN=0000000001 USID=0000000002 START = 13.264 11:55:36.700000
DEALLOC =13.264 11:59:26.400910 DEALLOC LRID =0000000000000000
ALLOC
ALLOC =13.264 12:00:53.523143 * ALLOC LRID =0000000000000000
DSSN=0000000002 USID=0000000003 START = 13.264 11:57:23.219776
DEALLOC =13.264 12:01:17.109739 DEALLOC LRID =0000000000000000
REORG
RUN = 13.264 11:54:46.529165 * USID = 0000000001
REORG# = 00000
13.264 12:09:15.180282 LISTING OF RECON PAGE 0004
-------------------------------------------------------------------------------
DBDS
DBD=DEDBJN22 AREA=DB22AR1 TYPE=FP
SHARE LEVEL=3 DSID=00002 DBORG=DEDB DSORG=VSAM
GSGNAME=**NULL** USID=0000000003
AUTHORIZED USID=0000000003 RECEIVE USID=0000000003 HARD USID=0000000003
RECEIVE NEEDED USID=0000000000
CAGRP=**NULL** GENMAX=2 IC AVAIL=0 IC USED=0 DSSN=00000002
NOREUSE RECOVPD=0 NOVSO NOPREOPEN NOPRELOAD NOFULLSG
CFSTR1=**NULL** CFSTR2=**NULL** NOLKASID NOMAS
DEFLTJCL=**NULL** ICJCL=ICJCL RECVJCL=ICRCVJCL RECOVJCL=RECOVJCL
DBRCVGRP=**NULL**
FLAGS: COUNTERS:
PROHIBIT AUTHORIZATION=ON AUTHORIZED SUBSYSTEMS =0
HELD AUTHORIZATION STATE=0
IC NEEDED =OFF ADS AVAIL # =1
IC RECOMMENDED =ON
RECOV NEEDED =OFF REGISTERED ADS # =1
EEQE COUNT =0
RECEIVE NEEDED =OFF
OFR REQUIRED =NO
TRACKING SUSPENDED =NO
HSSP CIC IN PROGRESS =NO
QUIESCE IN PROGRESS =NO
QUIESCE HELD =NO
ADS LIST:
CREATE
-ADS DDN--ADS DSN- -STAT- -RUNNING-
DB22AR1 IMSTESTL.DB22AR1 AVAIL NO
-------------------------------------------------------------------------------
ALLOC
ALLOC =13.264 11:58:28.360678 * ALLOC LRID =0000000000000000
DSSN=0000000001 USID=0000000002 START = 13.264 11:55:36.700000
DEALLOC =13.264 11:59:26.400910 DEALLOC LRID =0000000000000000
ALLOC
ALLOC =13.264 12:00:53.609711 * ALLOC LRID =0000000000000000
DSSN=0000000002 USID=0000000003 START = 13.264 11:57:23.219776
DEALLOC =13.264 12:01:17.109739 DEALLOC LRID =0000000000000000
REORG
RUN = 13.264 11:54:46.692175 * USID = 0000000001
REORG# = 00000
13.264 12:09:15.180282 LISTING OF RECON PAGE 0005
-------------------------------------------------------------------------------
DBDS
DBD=DEDBJN22 AREA=DB22AR2 TYPE=FP
SHARE LEVEL=3 DSID=00003 DBORG=DEDB DSORG=VSAM
GSGNAME=**NULL** USID=0000000001
AUTHORIZED USID=0000000000 RECEIVE USID=0000000000 HARD USID=0000000000
RECEIVE NEEDED USID=0000000000
CAGRP=**NULL** GENMAX=2 IC AVAIL=0 IC USED=0 DSSN=00000000
NOREUSE RECOVPD=0 NOVSO NOPREOPEN NOPRELOAD FULLSEG
CFSTR1=**NULL** CFSTR2=**NULL** NOLKASID NOMAS
DEFLTJCL=**NULL** ICJCL=ICJCL RECVJCL=ICRCVJCL RECOVJCL=RECOVJCL
DBRCVGRP=**NULL**
FLAGS: COUNTERS:
PROHIBIT AUTHORIZATION=ON AUTHORIZED SUBSYSTEMS =0
HELD AUTHORIZATION STATE=0
IC NEEDED =OFF ADS AVAIL # =1
IC RECOMMENDED =ON
RECOV NEEDED =OFF REGISTERED ADS # =1
EEQE COUNT =0
RECEIVE NEEDED =OFF
OFR REQUIRED =NO
TRACKING SUSPENDED =NO
HSSP CIC IN PROGRESS =NO
QUIESCE IN PROGRESS =NO
QUIESCE HELD =NO
ADS LIST:
CREATE
-ADS DDN--ADS DSN- -STAT- -RUNNING-
DB22AR2 IMSTESTL.DB22AR2 AVAIL NO
-------------------------------------------------------------------------------
REORG
RUN = 13.264 11:54:46.843222 * USID = 0000000001
REORG# = 00000Entry ET (With comments):
/RML DBRC='DBDS DBD(DEDBJN21) AREA(DB21AR0)'. *VSO AREA*.Response ET:
LIST.DBDS DBD(DEDBJN21) AREA(DB21AR0)
------------------------------------------------------------------------
DBDS
DBD=DEDBJN21 AREA=DB21AR0 TYPE=FP
SHARE LEVEL=1 DSID=001 DBORG=DEDB DSORG=VSAM
GSG NAME=**NULL** USID=0000000002
AUTHORIZED USID=0000000002 RECEIVE USID=0000000002 MAX USID=0000000002
RECEIVE NEEDED USID=0000000000
CAGRP=**NULL** GENMAX=5 IC AVAIL=0 IC USED=0 DSSN=0000000
HSSP IC IN PROCESS=NO AVAIL USED PARTIAL
HSSP IC=0 HSSP IC=0 HSSP IC=0
REUSE RECOVPD=0 VSO PREOPEN PRELOAD FULLSEG
DEFLTJCL=**NULL** ICJCL=ICJCL RECVJCL=ICRCVJCL RECOVJCL=RECOVJCL
FLAGS: COUNTERS:
PROHIBIT AUTHORIZATION=OFF AUTHORIZED SUBSYSTEMS =1
HELD AUTHORIZATION STATE=7
IC NEEDED =OFF ADS AVAIL # =1
RECOV NEEDED =OFF REGISTERED ADS # =1
EEQE COUNT =0
TRACKING IN PROGRESS =NO RECEIVE NEEDED =OFF
OFR REQUIRED =NO
TRACKING SUSPENDED =NO
HSSP CIC IN PROGRESS =NO
QUIESCE IN PROGRESS =YES
QUIESCE HELD =NO
ADS LIST:
CREATE
-ADS DDN--ADS DSN- -STAT- -RUNNING-
DB21AR0 DB21AR0 AVAIL NO
ASSOCIATED SUBSYSTEM INFORMATION:
ENCODED
-SSID- -ACCESS INTENT- -STATE- -SS ROLE-
SYS3 EXCLUSIVE 7 ACTIVE
ALLOC
ALLOC = 93.076 13:30:35.0* START = 93.076 13:30:23.3
LRID=0000000000000000 DSSN=0000000001 USID=0000000002
REORG
RUN = 93.076 13:23:38.0* USID=0000000000
DSP0180I NUMBER OF RECORDS LISTED IS 3
DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00
DSP0220I COMMAND COMPLETION TIME 93.076 13:37:36.7
DSP0211I COMMAND PROCESSING COMPLETE
DSP0211I HIGHEST CONDITION CODE = 00
DSP0058I RML COMMAND COMPLETED
Entry ET (With comments):
/RML DBRC='DBDS DBD(DEDBJN21) AREA(DB21AR6)'. *DEDB AREA*.Response ET:
LIST.DBDS DBD(DEDBJN21) AREA(DB21AR6)
------------------------------------------------------------------------
DBDS
DBD=DEDBJN21 AREA=DB21AR6 TYPE=FP
SHARE LEVEL=1 DSID=007 DBORG=DEDB DSORG=VSAM
GSG NAME=**NULL** USID=0000000002
AUTHORIZED USID=0000000002 RECEIVE USID=0000000002 MAX USID=00000000
RECEIVE NEEDED USID=0000000000
CAGRP=**NULL** GENMAX=5 IC AVAIL=0 IC USED=0 DSSN=0000000
HSSP IC IN PROCESS=NO AVAIL USED PARTIAL
HSSP IC=1 HSSP IC=0 HSSP IC=0
REUSE RECOVPD=0 NOVSO NOPREOPEN NOPRELOAD FULLSEG
DEFLTJCL=**NULL** ICJCL=ICJCL RECVJCL=ICRCVJCL RECOVJCL=RECOVJCL
FLAGS: COUNTERS:
PROHIBIT AUTHORIZATION=OFF AUTHORIZED SUBSYSTEMS =0
HELD AUTHORIZATION STATE=0
IC NEEDED =OFF ADS AVAIL # =0
RECOV NEEDED =ON REGISTERED ADS # =1
EEQE COUNT =0
TRACKING IN PROGRESS =NO RECEIVE NEEDED =OFF
OFR REQUIRED =NO
TRACKING SUSPENDED =NO
HSSP CIC IN PROGRESS =NO
QUIESCE IN PROGRESS =YES
QUIESCE HELD =NO
ADS LIST:
CREATE
-ADS DDN--ADS DSN- -STAT- -RUNNING
DB21AR6 DB21AR6 UNAVAIL NO
ALLOC
ALLOC = 93.076 13:32:05.0* START = 93.076 13:30:23.3
LRID=0000000000000000 DSSN=0000000001 USID=0000000002
DEALLOC = 93.076 13:34:21.2 DEALLOC LRID=0000000000000000
REORG
RUN = 93.076 13:24:12.5* USID=0000000000
AVAILABLE DATA SET
DBD=DEDBJN21 DDN=DB21AR6
IMAGE
* CREATE = 93.076 13:22:52.8* HSSP
IC1
DSN=IC21AR6
DSP0180I NUMBER OF RECORDS LISTED IS 4
DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00
DSP0220I COMMAND COMPLETION TIME 93.076 13:38:21.0
DSP0211I COMMAND PROCESSING COMPLETE
DSP0211I HIGHEST CONDITION CODE = 00
DSP0058I RML COMMAND COMPLETEDExample for /RMNOTIFY command
Entry ET (with comments):
/RMNOTIFY DBRC='SUBSYS SSID(IMSB) IRLMID(IRLM1) NORMAL'.Response ET:
NOTIFY.SUBSYS SSID(IMSB) IRLMID(IRLM1) NORMAL
DSP0203I COMMAND COMPLETED WITH CONDITION CODE 00
DSP0220I COMMAND COMPLETION TIME
DSP0211I COMMAND PROCESSING COMPLETE.
DSP0211I HIGHEST CONDITION CODE = 00
DSP0058I RMN COMMAND COMPLETED