Status providers for sensors

The status providers for sensors can help diagnose hardware problems.

The appliance provides the following sensors status providers.
Fan speed sensors
Provides the measured speed in RPM for the fans in each fan module.
  • In the GUI search field, enter sensors and click Fan Sensors.
  • From the CLI, enter show sensors-fans.
Temperature sensors
Provides the measured temperature in degrees Celsius for internal components.
  • In the GUI search field, enter sensors and click Temperature Sensors.
  • From the CLI, enter show sensors-temperature.
Voltage sensors
Provides the measured voltage for internal components.
  • In the GUI search field, enter Sensors and click Voltage Sensors.
  • From the CLI, enter show sensors-voltage.
Current sensors
Provides the measured current for the internal components in milliamperes.
  • In the GUI search field, enter sensors and click Current Sensors.
  • From the CLI, enter show sensors-current.
RAID battery backup status
Monitors the power backup unit connected to the RAID controller.
  • In the GUI search field, enter RAID and click RAID Battery Backup Status.
  • From the CLI, enter show raid-battery-module.
Other sensors
Provides truth values for the status of intrusion switch and power supply modules, each hard disk in the array, and the battery.
  • In the GUI search field, enter sensors and click Other Sensors.
  • From the CLI, enter show sensors-other.
The values are as follows.
true
The indicator that the condition exists.
false
The indicator that the conditions does not exist.
  • For the intrusion switch, the value indicates whether it was tripped.
  • For each power supply, the value indicates the condition.
    • Output Failure: The power supply module failed.
    • AC lost: The power cord is not attached.
  • For each hard disk in the array and the battery, the values indicates the state.
    • Fault
    • Present