PCIe3 cable adapter (FC EJ19; CCIN 6B53)

Learn about the specifications and operating system requirements for the feature code (FC) EJ19 adapter.

Overview

FC EJ19 is a double-wide, low-profile, PCIe generation 3 (PCIe3) adapter. The adapter provides two optical ports for the attachment of two expansion drawer cables. One adapter supports the attachment of one PCIe3 6-slot fanout module in a EMX0 PCIe Gen3 I/O expansion drawer.

Note: The FC EJ19 (CCIN 6B53) adapter only works with the CCIN 50CD PCIe3 6-slot fanout module.

PCIe gen3 x16 GPU adapter — Figure 1. PCIe3 x16 GPU adapter

Note: The LEDs that are shown in Figure 1 indicate the following states:

The green LED indicates link status. If the green LED is on, at least one PCIe link is in the trained state.
The amber LED indicates FRU identify. If the amber LED is on, it will blink at 2 Hz, and indicates that the adapter is in the identify function state.

Specifications

Item: Description
Adapter FRU number: 02AE929
I/O bus architecture: PCIe3 x16
Slot requirement: For details about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities and select the system you are working on.
Voltage: 12 V
Form factor: Half-height, half-length