PCIe3 cable adapter (FC EJ07; CCIN 6B52)

Learn about the specifications and operating system requirements for the feature code (FC) EJ07 adapter.

Overview

The FC EJ07 is a double-wide, low-profile, PCIe generation 3 (PCIe3) cable adapter. The adapter provides two optical ports for the attachment of two expansion drawer cables. One adapter supports the attachment of one PCIe3 6-slot fanout module in a EMX0 PCIe Gen3 I/O expansion drawer.

Note: The FC EJ07 (CCIN 6B52) adapter only works with the CCIN 50CB PCIe3 6-slot fanout module.
Figure 1. PCIe3 cable adapter
PCIe3 cable adapter
Note: The LEDs that are shown in Figure 1 indicate the following states:
  • The green LED indicates link status. If the green LED is on, at least one PCIe link is in the trained state.
  • The amber LED indicates FRU identify. If the amber LED is on, it will blink at 2 Hz, and indicates that the adapter is in the identify function state.

Specifications

Item
Description
Adapter FRU number
000TK704.
I/O bus architecture
PCIe3 x16
Slot requirement
For details about slot priorities, maximums, and placement rules, see PCIe adapter placement rules and slot priorities and select the system you are working on.
Voltage
12 V
Form factor
Full-height, full-length