2738/28EF |
2-Port USB PCI Adapter - Short, 32-bit, 3.3 or 5V
- OS support: AIX and Linux
|
2749/2749 |
PCI Ultra Magnetic Media Controller- Short, 32-bit, 33 MHz
- OS support: i operating system
- IOP controlled
- Memory value: 22
- Performance value: 25
- This adapter might encounter performance limitations in PCI-X
expansion units and systems.
- A maximum of two 2749 or 4805 adapters in any combination allowed
per IOP, except for CCIN 289x IOPs.
|
2757/2757 |
PCI Ultra RAID Disk Controller
|
2780/2780 |
PCI-X Ultra4 RAID Disk Controller
|
2787/2787 |
PCI-X Fibre Channel Disk Unit
Controller - Short, 64-bit, 133 MHz
- High bandwidth
- OS support: i operating system
- For best performance, place the controller
in a 64-bit slot.
- IOP controlled
- Only one per IOP and no other IOAs
- A maximum of two 2787, 5704, 5760, or 5761 (any
combination) is allowed per PCI bridge set boundary.
- This IOA can be used in multipath configurations. To improve the
availability provided by multipath configurations, place each IOA
and its IOP on different HSL loops, in different expansion units or
on different multi-adapter bridges.
|
2849/NA |
POWER® GXT135P
Graphics Accelerator with Digital Support- Short, 32 or 64-bit, 3.3V
- OS support: AIX and Linux
- Not hot-pluggable
- Not supported in the 7311-D11 expansion
unit
- Not supported in the 7311-D20 expansion
unit connected to a model 9117-MMA server
|
3709/2849 |
PCI 100/10 Mbps Ethernet IOA - Short, 32-bit, 33 MHz
- OS support: i operating system
- IOP controlled
- Memory value: 25
- Performance value: 36
- A maximum of two 3709 in any combination is allowed per IOP
|
2943/3-B |
8-Port Asynchronous Adapter
EIA-232/RS-422, PCI bus - Short, 32-bit, 3.3 or 5V
- OS support: AIX, i, and Linux operating systems
|
2947/9-R |
ARTIC960Hx 4-Port Multiprotocol
PCI Adapter - Long, 32-bit, 3.3 or 5V
- OS support: AIX
|
2962/9-L |
2-Port Multiprotocol PCI Adapter- Short, 32-bit, 3.3 or 5V
- OS support: AIX
|
4746/2746 |
PCI Twinaxial Workstation Controller
IOA - Short, 32-bit, 33 MHz
- OS support: i operating system
- IOP controlled
- Memory value: 10
- Performance value: 6
|
4764/4764 |
PCI-X Cryptographic Coprocessor- Short, 64-bit, 3.3V
- OS support: AIX and i operating system
|
4801/4758 |
PCI Cryptographic Coprocessor - Short, 32-bit, 33 MHz
- OS support: i operating system
- IOP controlled
- Memory value: 11
- Performance value: 18
- The adapter cannot be controlled by the load source IOP.
|
4805/2058 |
PCI Cryptographic Accelerator - Short, 32-bit, 33 MHz
- OS support: i operating system
- IOP controlled
- Memory value: 2
- Performance value: 26
- A maximum of two 3709 and 4805 adapters
in any combination is allowed per IOP, except for CCIN 289x IOPs.
- The adapter cannot be controlled by the load source IOP.
- A maximum of two 4805 adapters are allowed per IOP,
but is restricted to a maximum of one per IOP if this IOP is also
driving a 5700 or 5701 adapter.
|
4812/4812
4813/4812
|
Base PCI Integrated xSeries® Server - Long, double-width, 64 bit, 66 MHz, 3.3 V
- OS support: i operating system
- Contains a 2.0 GHz processor with 2 MB integrated L2 cache
- Two integrated 1000/100/10 Mbps Ethernet ports, two USB 1.1 ports,
and traditional PC keyboard and mouse ports
- A keyboard and mouse can either connect to the traditional ports
or connect to the USB ports.
- An SVGA video port for connection of a display.
- This feature has two memory slots. These slots must always contain
a pair of identical memory features.
- Available memory features are: #9726 - Base 512 MB Server Memory
(Initial order only) #8546 - Opt Base 1 Gb Server Memory (Initial
order only) #0446 - 512 MB DDR Server Memory (MES only) #0447 - 1
Gb DDR Server Memory (MES only.) The #9812 requires an IOP (#2844,
#9744 or #9844).
|
5580/2780 and 5708 |
2780 Controller with 5708 Auxiliary
Write Cache- Long, 133 MHz, 32 or 64-bit, 3.3V
- OS support: i operating system
- Two adapter set, requires two open slots within the same enclosure.
- The 2757 and 2780 controllers are high bandwidth
- 5708 Auxiliary Write Cache is low bandwidth.
- If possible, place the 2757 or 2780 controller in a 64 bit, 133
MHz slot, or better, for best performance.
- IOP controlled
- Memory value: 29
- Performance value: 30
- See SCSI RAID controller placement restrictions for IBM i.
|
5581/2757 and 5708 |
2757 Controller with 5708 Auxiliary
Write Cache- Long, 133 MHz, 32 or 64-bit, 3.3V
- OS support: i operating system
- Two adapter set, requires two open slots within the same enclosure.
- The 2757 and 2780 controllers are high bandwidth
- 5708 Auxiliary Write Cache is low bandwidth.
- If possible, place the 2757 or 2780 controller in a 64 bit, 133
MHz slot, or better, for best performance.
- IOP controlled
- Memory value: 29
- Performance value: 30
- See SCSI RAID controller placement restrictions for IBM i.
|
5583/571E and 574F |
5738 Controller with 574F Auxiliary
Write Cache IOA
|
5590/2780 and 574F |
2780 Controller with 574F Auxiliary
Write Cache IOA- Long, 133 MHz, 32 or 64-bit, 3.3V
- OS support: i operating system
- Place the controller side of the adapter pair in a 64 bit, 133
MHz slot, or better, for best performance.
- Two adapter set requires two open slots within the same enclosure.
- The 2780 and 2757 controllers are high bandwidth
- The Auxiliary Write Cache is low bandwidth.
- IOP controlled
- Memory value: 29
- Performance value: 30
- For more information about this adapter
and slot restrictions, see SCSI RAID controller placement restrictions for IBM i and High-performance SCSI, disk controller placement for IBM i.
|
5591/2757 and 574F |
2757 Controller with 574F Auxiliary
Write Cache IOA
|
5700/5700 |
Gigabit Ethernet-SX PCI-X Adapter- Short, 32 or 64-bit, 3.3 or 5V
- High bandwidth
- OS support: AIX, i, and Linux operating systems
- i configuration notes:
- IOP controlled
- Memory value: 2
- Performance value: 26
- Can be combined with a maximum of one other IOA.
- A maximum of two 4805, 5700, or 5701 in any combination is allowed
per IOP.
- Half-duplex mode is not supported.
- SNA is not supported.
|
5701/5701 |
10/100/1000 Base-TX Ethernet
PCI-X Adapter- Short, 32 or 64-bit, 3.3 or 5V
- High bandwidth
- OS support: AIX, i, and Linux operating systems
- i configuration notes:
- IOP controlled
- Memory value: 2
- Performance value: 26
- The adapter can be combined with a maximum of one other IOA.
- A maximum of two 4805, 5700, or 5701 in any combination per IOP.
- Half-duplex mode is not supported.
- SNA is not supported.
|
5702/5702 |
PCI-X Ultra Tape Controller - Short, 64-bit, 133 MHz
- OS support: i operating system
- High bandwidth
- IOP controlled
- Memory value: 29
- Performance value: 21
|
5704/5704 |
PCI-X Fibre Channel Tape Controller- Short, 64-bit, 133 MHz
- OS support: i operating system
- High bandwidth
- IOP controlled
- Memory value: 36
- Performance value: 50
- For best performance, place the controller
in a 64-bit slot.
- A maximum of two 2787, 5704, 5760, or 5761 (any
combination) is allowed per PCI bridge set boundary.
|
5706/5706 |
2-Port 10/100/1000 Base-TX Ethernet
PCI-X Adapter- Short, 32 or 64-bit, 3.3 or 5V
- High bandwidth
- OS support: AIX, i, and Linux operating systems
|
5707/5707 |
2-Port Gigabit Ethernet-SX PCI-X
Adapter- Short, 32 or 64-bit, 3.3 or 5V
- High bandwidth
- OS support: AIX, i, and Linux operating systems
|
5710/5702 |
PCI-X Dual Channel Ultra320
SCSI Blind Swap Adapter- 64-bit, 3.3 volt
- High bandwidth
- OS support: AIX
|
5712/5702 |
PCI-X Dual Channel Ultra 320
SCSI Adapter - Short, 32 or 64-bit, 3.3V
- High bandwidth
- OS support: AIX, i, and Linux operating systems
- i configuration notes:
- IOP controlled
- Memory value: 29
- Performance value: 21
|
5713/573B |
1 Gigabit-TX iSCSI TOE PCI-X
Adapter- Short, 32 or 64-bit, 3.3 or 5V
- High bandwidth
- OS support: AIX, i, and Linux operating systems
|
5714/573C |
1 Gigabit-SX iSCSI TOE PCI-X
Adapter- Short, 32 or 64-bit, 3.3 or 5V
- High bandwidth
- OS support: AIX, i, and Linux operating systems
|
5716/280B |
2 Gigabit Fibre Channel PCI-X
Adapter- Short, 32 or 64-bit, 3.3 or 5V
- High bandwidth
- OS support: AIX and Linux
|
5718/5718 |
10 Gigabit-SR Ethernet PCI-X
Adapter - Short, 64-bit, 3.3V
- Extra-high bandwidth
- OS support: AIX, i, and Linux operating systems
|
5719/5719 |
10 Gigabit-LR Ethernet PCI-X
Adapter - Short, 64-bit, 3.3V
- Extra-high bandwidth
- OS support: AIX, i, and Linux operating systems
|
5721/573A |
10 Gb-SR Ethernet PCI-X 2.0
DDR Adapter - Short, 64 bit, 3.3 V
- Extra-high bandwidth
- OS support: AIX, i, and Linux operating systems
|
5722/576A |
10 Gb-LR Ethernet PCI-X 2.0
DDR Adapter - Short, 64-bit, 3.3 V
- Extra-high bandwidth
- OS support: AIX, i, and Linux operating systems
|
5723/5723 |
2-Port EIA-232 Asynchronous
PCI Adapter- Short, 32–bit, 3.3V or 5V
- High bandwidth
- OS support: AIX, i, and Linux operating systems
|
5736/ 571A |
PCI-X DDR 2.0 Dual Channel Ultra320
SCSI Adapter- Short, 32 to 64-bit, 3.3V
- High bandwidth
- OS support: AIX, i, and Linux operating systems
- i configuration notes:
|
5740/5740 |
4-Port 10/100/1000 Base-TX PCI-X
Adapter- Short, 64-bit, 3.3V
- Extra-high bandwidth
- OS support: AIX, i, and Linux operating systems
|
5749/576B |
4 Gigabit Dual-Port Fibre Channel
PCI-X 2.0 DDR Adapter- Short, 64-bit, 3.3V
- OS support: i operating system
- Extra-high bandwidth
- 64-bit slot required
- Recommended in DDR slot
- Maximum of four per enclosure
- Maximum of two per PCI host bridge
|
5758/280D |
4 Gb Single-Port Fibre Channel
PCI-X 2.0 DDR Adapter - Short, 32 or 64-bit, 3.3V
- High bandwidth
- OS support: AIX, i, and Linux operating systems
|
5759/5759 |
4 Gb Dual-Port Fibre Channel
PCI-X 2.0 DDR Adapter- Short, 64-bit, 3.3V
- Extra-high bandwidth
- OS support: AIX, i, and Linux operating systems
|
5760/280E |
PCI-X Fibre Channel Disk Controller- Short, 64-bit, 3.3V, 133 MHz
- OS support: i operating system
- Extra-high bandwidth
- IOP controlled
- For best performance, place the controller
in a 64-bit slot.
- Only one per IOP and no other IOAs.
- A maximum of two 2787, 5704, 5760, or 5761 (any
combination) is allowed per PCI bridge set boundary.
- This IOA can be used in multipath configurations. To improve the
availability provided by multipath, place each IOA and its IOP on
different HSL loops, in different expansion units or on different
multi-adapter bridges.
|
5761/280D |
PCI-X Fibre Channel Disk Controller- Short, 64-bit, 3.3V, 133 MHz
- OS support: i operating system
- Extra-high bandwidth
- IOP controlled
- Memory value: 36
- Performance value: 50
- Extra-high bandwidth.
- For best performance, place in a 64-bit position.
- A maximum of two 2787, 5704, 5760, or 5761 (any
combination) is allowed per PCI bridge set boundary.
- For best performance, do not mix with other extra-high bandwidth
adapters in the same multi-adapter bridge boundary.
|
5776/571B |
PCI-X Disk Controller - 90 MB- Long, 64 bit, 266 MHz
- OS support: i operating system
- Extra-high bandwidth
- Dual-mode capable adapter
- The controller must be mirrored to be supported.
|
5777/571E |
PCI-X Dual Channel Ultra320
SCSI RAID Adapter
|
5778/571F
and 575B
5780/571F
and 575B
5782/571F
and 575B
|
PCI-X Dual Channel Ultra320
SCSI RAID Adapter with Auxiliary Write Cache (double-wide)- Long, 64-bit, 3.3V, 266 MHz
- OS support: i operating system
- Dual-mode capable adapter
- Extra-high bandwidth
- Double-wide adapter, requires two, adjacent slots. The SCSI
controller side of the adapter pair requires a 64-bit slot. (The controller
side is the side with the external SCSI connectors.)
- When used in a logical partition (LPAR) environment, this double-wide
adapter must have both slots of the adapter assigned to the same logical
partition. When using DLPAR, both slots of the adapter must be managed
together.
- Because of the complexity of this adapter, concurrent maintenance
is not supported through the HMC. Concurrent maintenance must be
done from the Hardware Service Manager (HSM).
- For more information about this adapter
and slot restrictions, see SCSI RAID controller placement restrictions for IBM i and High-performance SCSI, disk controller placement for IBM i.
|
5806/571A |
PCI-X DDR Dual Channel Ultra320
SCSI Adapter- Short, 32 to 64-bit, 3.3V
- High bandwidth
- OS support: i operating system
- i configuration notes:
|
5900/572A |
PCI-X DDR Ext Dual-x4 3Gb SAS
Adapter - Short, 64-bit, 3.3V
- Extra-high bandwidth
- OS support: AIX and Linux
|
5902/572B |
PCI-X DDR Ext Dual-x4 3Gb SAS
RAID Adapter- Long, 64-bit, 3.3V
- Extra-high bandwidth
- OS support: AIX and Linux
- The adapter must be connected and configured in a dual controller
mode, multi-initiator configuration, and this requires that the adapter
be installed in pairs.
- This adapter supports disk expansion units. This adapter does
not support media expansion units.
|
5904, 5906, and 5908 / 572F and 575C
|
PCI-X DDR 1.5 GB cache
SAS RAID Adapter - Long, 64-bit, 3.3V
- Extra-high bandwidth
- Double-wide adapter requires two adjacent slots:
- 572F is the CCIN number on the SAS controller side of the double-wide
adapter.
- 575C is the CCIN number on the write-cache side of the double-wide
adapter.
- The different feature codes indicate whether a blind swap cassette
is used and its type:
- 5904 indicates no blind swap cassette.
- 5906 indicates a gen-2.5 blind swap cassette.
- 5908 indicates a gen-3 blind swap cassette.
- OS support: AIX, i, and Linux operating systems
|
5912/572A |
PCI-X DDR Dual-x4 3Gb SAS Adapter- Short, 64-bit, 3.3V
- Extra-high bandwidth
- OS support: AIX, i, and Linux operating systems
- Supports a dual controller mode, multi-initiator configuration
|
6312/6312 |
Quad Digital Trunk Telephony
PCI Adapter- Long, 32 or 64-bit, 3.3 or 5V
- OS support: AIX
- Digital Trunk adapters have an internal cable and must be in contiguous
slots.
|
6805/2742 |
PCI Two-Line WAN IOA- Short, 32-bit, 66 MHz
- OS support: i operating system
|
6808/2805 |
PCI Quad Modem IOA - Long, 32-bit, 66 MHz
- OS support: i operating system
- Non-CIM
|
6809/2805 |
PCI Quad Modem IOA - Long, 32-bit, 66 MHz
- OS support: i operating system
- CIM
|
6833/2793 |
PCI 2-Line WAN with Modem- Short, 32-bit, 66 MHz
- OS support: i operating system
- Dual-mode adapter
- Non-CIM
|
6834/2793 |
PCI 2-Line WAN with Modem - Short, 32-bit, 66 MHz
- OS support: i operating system
- Dual-mode adapter
- CIM
|