Broadcom (LSI) MegaRAID 9361-8i SAS3 Controller with 8 Internal Ports (1 GB Cache) PCIe3.0 x8 LP with cables (FC EKAA and EKEA)
Learn about the specifications and operating system requirements for feature code (FC) EKAA and EKEA adapters.
Overview
FC EKAA and EKEA are both the same adapter with different feature codes. FC EKAE is only supported on 8001-12C and does not include cables. FC EKEA, alternatively, is only supported on 8001-22C and includes cables.
Specifications
- Item
- Description
- Adapter FRU number
- FC EKAA: 01EM631 (AOC-K-9361-8IS-IB001) (Designed to comply with RoHS requirement)
- FC EKEA: 01EM636 (AOC-K-9361-8IB-IB001) (Designed to comply with RoHS requirement)
- I/O bus architecture
- PCIe3 x8
- Slot requirement
- For details about slot priorities and placement rules, see PCIe adapter placement rules and slot priorities and select the system you are working on.
- Supported Systems
- POWER8® processor-based systems
- 8001-12C and 8001-22C
- Voltage
- 12 V
- Form factor
- Short, low-profile
- Maximum number
- For details about the maximum number of adapters that are supported, see PCIe adapter placement rules and slot priorities and select the system you are working on.
- Attributes provided
- Port independent auto-negotiation
- Automatically negotiates PCIe link widths
- Supports 1.5, 3.0, 6.0 and 12 Gb/s SAS and SATA data transfer rates
- Advanced array configuration and management utilities
- Cables
- Attach any necessary cables to the add-on card.
Set JBOD mode on the adapter
Before you set up the adapter in JBOD mode, download the LSI Storage Command Line Tool (storcli64) RAID utility from Fix Central.
- Boot the system to the Petitboot main menu.
- Copy the storcli64 RAID utility to Petitboot by using mount from the shell:
-t nfs -n -o nolock <LCB IP>:<path to storcli64> /mnt
- Set the adapter up in JBOD mode.
- Show the controller summary:
storcli64 /c0 show
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new feature and that you determine whether any prerequisites must be met for this feature and attaching devices. To check for the prerequisites, see IBM® Prerequisite website.
- Linux
- Red Hat Enterprise Linux 7.2, little-endian, for Power, or later
- Ubuntu 16.04.1, or later
- Ubuntu 14.04.5, or later
- For support details, see the Linux Alert website.
- The latest version of the device driver or iprutils can be downloaded from the IBM Service and Productivity Tools website.
- The latest version of enabling libraries and utilities may be downloaded from Fix Central.