Ethernet iSCSI host-link problems

If you are having problems attaching to the Ethernet hosts, your problem might be related to the network, the Storwize® V3500 system, or the host.

Note: Storwize V3500 and Host IP should be on the same VLAN. Host and Storwize V3500 nodes should not have same subnet on different VLANs.

For network problems, you can attempt any of the following actions:

Test your connectivity between the host and Storwize V3500 ports.
Try to ping the Storwize V3500 system from the host.
Ask the Ethernet network administrator to check the firewall and router settings.
Check that the subnet mask and gateway are correct for the Storwize V3500 host configuration.

Using the management GUI for Storwize V3500 problems, you can attempt any of the following actions:

View the configured node port IP addresses.
View the list of volumes that are mapped to a host to ensure that the volume host mappings are correct.
Verify that the volume is online.

For host problems, you can attempt any of the following actions:

Verify that the host iSCSI qualified name (IQN) is correctly configured.
Use operating system utilities (such as Windows device manager) to verify that the device driver is installed, loaded, and operating correctly.
If you configured the VLAN, check that its settings are correct. Ensure that Host Ethernet port, Storwize V3500 Ethernet ports IP address, and Switch port are on the same VLAN ID. Ensure that on each VLAN, a different subnet is used. Configuring the same subnet on different VLAN IDs can cause network connectivity problems.