Running the scan task

Depending on how the task is configured, you can run the scan task in either Taskmaster Web or Taskmaster DotScan.

1. Load a page into your scanner's feeder.
2. If you are using remote scanning (scancl.aspx), complete the Scan task as follows:
   1. On the Operations tab of the Taskmaster Web client, click Scan.
   2. After scancl.aspx loads into the Taskmaster Web client, click Scan.
   3. After Taskmaster scans the page, click OK and Done.
      Important: To upload a scanned image to the Taskmaster server, you also must complete the Upload task, which you can start on the Operations tab.
3. If you are using DotScan, complete the Scan task as follows:
   1. Start the DotScan program (on Windows 7, Start > All Programs > Datacap > Administrator > Application Clients > Taskmaster DotScan.
   2. Enter TravelDocs for the Application, enter admin for the User and Password, enter 1 for the Station and click Login.
   3. Select Scan from the Shortcut menu, and click Start.
   4. For the first time that you are using DotScan with a scanner, or if you want to change the scanner that you used previously, click Select....
   5. Choose the scanner that you want to use, and configure the scanner by completing one of the following tasks:
      • Set the values for functions, such as scan resolution, paper source, color mode, and others.
      • Click Configure and set the options in the scanner driver user interface.
   6. In the DotScan main window, click Scan.
   7. When DotScan scans the page, exit from DotScan.