Server events
The following table lists the events that are created for the Server component.
Server events
Event | Event Type | Severity | Message | Description | Cause | User Action |
---|---|---|---|---|---|---|
cpu_peci_ok | STATE_CHANGE | INFO | PECI state of CPU {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
cpu_peci_failed | STATE_CHANGE | ERROR | PECI state of CPU {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
cpu_qpi_link_ok | STATE_CHANGE | INFO | QPI Link of CPU {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
cpu_qpi_link_failed | STATE_CHANGE | ERROR | QPI Link of CPU {0} is failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
cpu_temperature_ok | STATE_CHANGE | ERROR | QPI Link of CPU {0} is failed. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
cpu_temperature_ok | STATE_CHANGE | INFO | CPU {0} temperature is normal ({1}). | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
cpu_temperature_failed | STATE_CHANGE | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. | ||
server_power_supply_ temp_ok | STATE_CHANGE | INFO | Temperature of Power Supply {0} is ok. ({1}) | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_power_supply_ temp_failed | STATE_CHANGE | ERROR | Temperature of Power Supply {0} is too high. ({1}) | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_power_supply_oc_line_ 12V_ok | STATE_CHANGE | INFO | OC Line 12V of Power Supply {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_power_supply_oc_line_ 12V_failed | STATE_CHANGE | ERROR | OC Line 12V of Power Supply {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_power_supply_ov_line_ 12V_ok | STATE_CHANGE | INFO | OV Line 12V of Power Supply {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_power_supply_ov_line_ 12V_failed | STATE_CHANGE | ERROR | OV Line 12V of Power Supply {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_power_supply_uv_line_ 12V_ok | STATE_CHANGE | INFO | UV Line 12V of Power Supply {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_power_supply_uv_line_ 12V_failed | STATE_CHANGE | ERROR | UV Line 12V of Power Supply {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_power_supply_aux_line_ 12V_ok | STATE_CHANGE | INFO | AUX Line 12V of Power Supply {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_power_supply_aux_line_ 12V_failed | STATE_CHANGE | ERROR | AUX Line 12V of Power Supply {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_power_supply_ fan_ok | STATE_CHANGE | INFO | Fan of Power Supply {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_power_supply_ fan_failed | STATE_CHANGE | ERROR | Fan of Power Supply {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_power_supply_ voltage_ok | STATE_CHANGE | INFO | Voltage of Power Supply {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_power_supply_ voltage_failed | STATE_CHANGE | ERROR | Voltage of Power Supply {0} is not ok. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_power_ supply_ok | STATE_CHANGE | INFO | Power Supply {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_power_ supply_failed | STATE_CHANGE | ERROR | Power Supply {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
pci_riser_temp_ok | STATE_CHANGE | INFO | The temperature of PCI Riser {0} is ok. ({1}) | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
pci_riser_temp_failed | STATE_CHANGE | ERROR | The temperature of PCI Riser {0} is too high. ({1}) | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_fan_ok | STATE_CHANGE | INFO | Fan {0} is ok. ({1}) | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_fan_failed | STATE_CHANGE | ERROR | Fan {0} failed. ({1}) | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
dimm_ok | STATE_CHANGE | INFO | DIMM {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
dimm_failed | STATE_CHANGE | ERROR | DIMM {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
pci_ok | STATE_CHANGE | INFO | PCI {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
pci_failed | STATE_CHANGE | ERROR | PCI {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
fan_zone_ok | STATE_CHANGE | INFO | Fan Zone {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
fan_zone_failed | STATE_CHANGE | ERROR | Fan Zone {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
drive_ok | STATE_CHANGE | INFO | Drive {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
drive_failed | STATE_CHANGE | ERROR | Drive {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
dasd_backplane_ok | STATE_CHANGE | INFO | DASD Backplane {0} is ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
dasd_backplane_failed | STATE_CHANGE | ERROR | DASD Backplane {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_cpu_ok | STATE_CHANGE | INFO | All CPUs of server {0} are fully available. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_cpu_failed | STATE_CHANGE | ERROR | At least one CPU of server {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_dimm_ok | STATE_CHANGE | INFO | All DIMMs of server {0} are fully available. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_dimm_failed | STATE_CHANGE | ERROR | At least one DIMM of server {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_pci_ok | STATE_CHANGE | INFO | All PCIs of server {0} are fully available. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_pci_failed | STATE_CHANGE | ERROR | At least one PCI of server {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_ps_conf_ok | STATE_CHANGE | INFO | All Power Supply Configurations of server {0} are ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_ps_conf_failed | STATE_CHANGE | ERROR | At least one Power Supply Configuration of server {0} is not ok. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_ps_heavyload _ok | STATE_CHANGE | INFO | No Power Supplies of server {0} are under heavy load. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_ps_heavyload _failed | STATE_CHANGE | ERROR | At least one Power Supply of server {0} is under heavy load. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_ps_resource _ok | STATE_CHANGE | INFO | Power Supply resources of server {0} are ok. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_ps_resource _failed | STATE_CHANGE | ERROR | At least one Power Supply of server {0} has insufficient resources. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_ps_unit_ok | STATE_CHANGE | INFO | All Power Supply units of server {0} are fully available. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_ps_unit_failed | STATE_CHANGE | ERROR | At least one Power Supply unit of server {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_ps_ambient_ok | STATE_CHANGE | INFO | Power Supply ambient of server {0} is ok. | The GUI checks the hardware state using xCAT. | he hardware part is ok. | None. |
server_ps_ambient _failed | STATE_CHANGE | ERROR | At least one Power Supply ambient of server {0} is not okay. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_boot_status_ok | STATE_CHANGE | INFO | The boot status of server {0} is normal. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_boot_status _failed | STATE_CHANGE | ERROR | System Boot failed on server {0}. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_planar_ok | STATE_CHANGE | INFO | Planar state of server {0} is healthy, the voltage is normal ({1}). | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_planar_failed | STATE_CHANGE | ERROR | Planar state of server {0} is unhealthy, the voltage is too low or too high ({1}). | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_sys_board_ok | STATE_CHANGE | INFO | The system board of server {0} is healthy. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_sys_board _failed | STATE_CHANGE | ERROR | The system board of server {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_system_event _log_ok | STATE_CHANGE | INFO | The system event log of server {0} operates normally. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_system_event _log_full | STATE_CHANGE | ERROR | The system event log of server {0} is full. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
server_ok | STATE_CHANGE | INFO | The server {0} is healthy. | The GUI checks the hardware state using xCAT. | The hardware part is ok. | None. |
server_failed | STATE_CHANGE | ERROR | The server {0} failed. | The GUI checks the hardware state using xCAT. | The hardware part failed. | None. |
hmc_event | STATE_CHANGE | INFO | HMC Event: {1} | The GUI collects events raised by the HMC. | An event from the HMC arrived. | None. |