Overview of the IPR Reload control statements
You can choose many options with IPR Reload utility control statements.
The following table lists the parameters you can specify in the HPSIN data set.
| Keyword | Accepted values | Default | Description |
|---|---|---|---|
| BMSETDSG | n or (n1, ..., n10)
n=value or * |
* | Specifies the threshold value that is used to set the bitmap block. See BMSETDSG control statement. |
| BYTELIMIT | DBD NOLIMIT nnnnnnnn |
DBD | Specifies the maximum number of bytes for a database record that can be inserted into the root addressable area. See BYTELIMIT control statement. |
| CHKEMPTYUL | YES YES,WARN YES,WARN,n NO |
YES,WARN,4 | Specifies whether to check if the unloaded data set contains segment data. See CHKEMPTYUL control statement. |
| CHKTRAIL | YES YES,WARN YES,ERROR NO |
YES,WARN | Specifies whether to check for the existence of the trailer record. See CHKTRAIL control statement. |
| CHKUPDT | YES YES,ABEND YES,WARN NO |
NO | Specifies whether the check for an update is done between unload and reload processes. See CHKUPDT control statement. |
| COMPAUTH | YES or NO | NO | Specifies whether to call the segment compression exit in supervisor state. See COMPAUTH control statement. |
| COMPRESS | YES or NO | YES | Compresses segments during reload. See COMPRESS control statement. |
| DATXEXIT | YES or NO | NO | Controls the IMS/ESA® Year 2000 Exit Tool support. See DATXEXIT control statement. |
| DBRECDIST | a or (b1,...,b20) a=0
- 9999999 |
(100,200,300,400,500, 600,700,800,900, 1000,2000,3000, 4000,5000,6000, 7000,8000,9000, 10000) |
Specifies the range of database record sizes you want to show in the Distribution of Database Record Sizes report. The range will be shown under RANGE. See DBRECDIST control statement. |
| DECODEDBD | YES or NO | NO | Specifies whether to decode the DBD. See DECODEDBD control statement. |
| EXTENT | 1 - 120 | 120 | Specifies the maximum number of extensions of the OSAM data set that can be created. See EXTENT control statement. |
| FRSPC | YES or NO | YES | Secures free space factors. See FRSPC control statement. |
| GDGBASE | YES or NO | NO | Specifies whether to create a GDG base entry. See GDGBASE control statement. |
| GDGLIMIT | nnn | 10 | Specifies the maximum number of GDS that can be associated with the GDG that is to be created. See GDGLIMIT control statement. |
| HPIO | YES or NO | YES | Specifies whether IMS HP Load uses High Performance I/O Driver for output data. See HPIO control statement. |
| INPUT | DFSUINPT, exitname, lang | DFSUINPT | Specifies, the user exit routine, and its language. See INPUT control statement. |
| ITKBLOAD | libname or *NO | *NO | Specifies the library name of IMS Tools KB. See ITKBLOAD control statement. |
| ITKBSRVR | servername servername,ERRC04 *NO |
*NO | Specifies the name of the IMS Tools KB server XCF group. See ITKBSRVR control statement. |
| OADSPR | YES or NO | NO | Specifies whether to reduce the usage of DSP to process (P)HDAM OA. See OADSPR control statement. |
| PAD | X'00' - X'FF' | X'00' | Specifies the padding character to fill out the segments to adjust to the length that is defined in the DBD definition. See PAD control statement. |
| PROGMON | 0 - 999999 | 0 | Monitors job progress. See PROGMON control statement. |
| RAAFORMAT | YES or NO | YES | Formats the HDAM or PHDAM RAA. See RAAFORMAT control statement. |
| RAPCHAIN | YES or NO | NO | Specifies whether to generate the Distribution of HDAM RAP Chain Length section in the HDAM Root Addressable Area Statistics report. See RAPCHAIN control statement. |
| RECNUM | nnnnnnnnnn | (none) | Specifies the number of unload records that are to be reloaded. See RECNUM control statement. |
| REPAIRILK | NO or YES | NO | Specifies whether to reassign indirect list keys (ILKs). In reassigning ILKs, the IPR Reload utility uses new RBA, partition ID, and reorganization number. See REPAIRILK control statement. |
| RMBSEGSZ | Yes or NO | NO | Specifies how IPR Reload utility calculates the database record size to determine whether to put the records into the overflow area. See RMBSEGSZ control statement. |
| SEARCH | -999(minus 999) - 999 | 3 | Sets the space search boundary. See SEARCH control statement. |
| SEQERROR | ABEND SAVE ACCEPT |
ABEND | Handles key sequence errors. See SEQERROR control statement. |
| SORT | YES NO COND |
NO | Specifies whether to run physical sequential sort before loading with (P)HDAM. See SORT control statement. |
| SORTHIDAM | YES or NO | NO | Specifies whether to run the root key sequential sort process before loading HIDAM or PHIDAM. See SORTHIDAM control statement. |
| TWINSTAT | YES or NO | NO | Prints statistics about the twin chained segments in the Segment Statistics report. See TWINSTAT control statement. |
| USERHDR | element | (none) | Specifies the name of the elements of the header portion of the unloaded record. See USERHDR control statement. |
| USERHDRX | exitname | (none) | Specifies the name of the user header conversion exit routine. See USERHDRX control statement. |
| WF1DSN | data_set_name or GDG_base_name.&GDG | (none) | Specifies the data set name for the DFSURWF1 data set when dynamically allocating the data set. See WF1DSN control statement. |
| WF1REC | YES or NO | YES | Specifies whether to create WF1 records that are written to the DFSURWF1 output work data set. See WF1REC control statement. |
| WF1SPACE | CYL or TRK, primary_alloc,secondary_alloc | (none) | Specifies the space parameter for the DFSURWF1 data set when dynamically allocating the data set. See WF1SPACE control statement. |
| WF1UNIT | unit_name | SYSALLDA | Specifies the device for the DFSURWF1 data set when dynamically allocating the data set. See WF1UNIT control statement. |
| WF1VOL | volume_name or * | (none) | Specifies volume names for the DFSURWF1 data set when dynamically allocating the data set. See WF1VOL control statement. |
| ZIIPMODE | COND or NEVER | NEVER | Specifies whether to offload eligible workloads to zIIP processors. See ZIIPMODE control statement. |
The following table shows IPR Reload utility control statements for performance.
| Keyword | Accepted values | Default | Description |
|---|---|---|---|
| BUFFERNO | 5 - 32767 | N/A | Sets the number of IPR Reload utility buffers. See BUFFERNO control statement. |
| DBIOBUF | 1 - 999 | 30 (for VSAM), 15 (for OSAM) | Sets the amount of VSAM/OSAM buffers. See DBIOBUF control statement. |
| DBRLBUF | 1 - 999 | 45 | Sets the amount of IPR Reload utility buffers. See DBRLBUF control statement. |
| Note: DBRLBUF and BUFFERNO are mutually
exclusive.
|
|||
The following table shows IPR Reload utility control statements for partitioned databases.
| Keyword | Accepted values | Default | Description |
|---|---|---|---|
| ILDSBLD | C YES YES,COND YES,DSPR YES,INITONLY NO |
YES,COND | Specifies whether to build ILDS and how to do it during reorganization. See ILDSBLD control statement. |
| ILEDATAC | data_class_name | (none) | Specifies the data class (DATACLAS) for the HPSRILEA and HPSRILEB data sets. See ILEDATAC control statement. |
| ILESTORC | storage_class_name | (none) | Specifies the storage class (STORCLAS) for the HPSRILEA and HPSRILEB data sets. See ILESTORC control statement. |
| LPART | (partname,nnn), (part1,..,partn), or *ALL | N/A | Specifies the HALDB partitions to load. See LPART control statement. |
| PARTINFO | YES or NO | YES | Specifies whether to generate the HALDB Partition Definition report. See PARTINFO control statement. |
| PARTINIT | NO YES YES,PINITON YES,UNLOAD YES,LPART YES,ALL |
NO | Initializes partitions not populated by any segment during reload. See PARTINIT control statement. |
| WFPHLQ | hlq | (none) | Specifies the high-level qualifier for the WFP data sets. See WFPHLQ control statement. |
| WFPSPACE | CYL or TRK, primary_alloc, secondary_alloc |
(none) | Specifies the SPACE parameter for the WFP data sets when allocating WFP data sets dynamically. See WFPSPACE control statement. |
| WFPUNIT | unit_name | SYSALLDA | Specifies the device for the WFP data sets when allocating WFP data sets dynamically. See WFPUNIT control statement. |
| WFPVOL | volume_name or * | (none) | Specifies the volume names for the WFP data sets when allocating WFP data sets dynamically. See WFPVOL control statement. |
| WFPVOLCNT | nnn | (none) | Specifies the volume count for the WFP data sets when allocating WFP data sets dynamically. See WFPVOLCNT control statement. |
The following table shows IPR Reload utility control statements for diagnosis.
| Keyword | Accepted values | Default | Description |
|---|---|---|---|
| DBDSNAP | YES or NO | NO | Generates the DBD Snap report. See DBDSNAP control statement. |