HPDAC0753E
The ACL action specified could not be mapped.
HPDAC0754E
Privacy or data integrity quality of protection cannot be specified in the unauthenticated entry.
HPDAC0755E
The ACL has an unauthenticated entry but there is no any-other entry. The any-other entry must be at least as permissive as unauthenticated.
HPDAC0756E
The any-other entry is missing actions from the unauthenticated entry. The any-other entry must be at least as permissive as unauthenticated.
HPDAC0757E
An entry in the ACL is missing some actions granted by the unauthenticated entry. Users can bypass an explicit action revocation if allowed by the unauthenticated entry.
HPDAC0758E
An entry in the ACL that grants control does not also grant traverse.
HPDAC0759E
No entry in the ACL grants control permission.
HPDAC0760E
The user is revoking the control permission for itself on this ACL.
HPDAC0766E
The ACL cannot be detached from the root protected object. Try replacing the attached ACL instead.
HPDAC0931E
Unable to configure LDAP replica server.
HPDAC0932E
An invalid LDAP bind user DN was specified.
HPDAC0933E
The password for the LDAP bind user was invalid.
HPDAC0934E
An invalid configuration file path was specified.
HPDAC0935E
An error occurred loading the aznAPI configuration file.
HPDAC0936E
An error occurred loading the configuration file specified as the parameter to 'ldap-server-config' in the aznAPI config file.
HPDAC0937E
An invalid maximum search size was specified.
HPDAC0940E
An invalid attribute value was specified for the azn_init_set_perminfo_attrs attribute.
HPDAC0941E
Too many permission information attributes were specified with the azn_init_set_perminfo_attrs attribute.
HPDAC0943E
An invalid trace configuration parameter was specified: %s.
HPDAC0944E
An invalid statistics configuration parameter was specified: %s.
HPDAC0945E
The value specified for the 'timeout' parameter in the [ldap] stanza is invalid: %s.
HPDAC0946E
The value specified for the 'authn-timeout' parameter in the [ldap] stanza is invalid: %s.
HPDAC0947E
The value specified for the 'search-timeout' parameter in the [ldap] stanza is invalid: %s.
HPDAC0948E
Validation of the rule text for the rule object failed. Refer to the error log for more information about the failure.
HPDAC0949E
Validation of the rule text for rule object %s failed. Error code 0x%x was returned along with error message %s.
HPDAC0950E
An ADI container name was found in multiple places in the input from the application. Refer to the error log for more information about the failure.
HPDAC0951E
The ADI container name %s was found in multiple places in the input from the application.
HPDAC0952E
The XSL processor failed to evaluate the rule object. Refer to the error log for more information about the failure.
HPDAC0953E
The XSL processor failed to evaluate the rule object %s. Error code 0x%x was returned along with error message %s.
HPDAC0954E
The rule object was not evaluated because there was insufficient access decision information provided in the application context and credential attributes.
HPDAC0955E
Rule object %s was not evaluated because there was insufficient access decision information provided to the access decision call. Missing ADI items include: %s.
HPDAC0956E
The rule text is invalid because the template match statement does not match one of the minimum required paths of /XMLADI or XMLADI.
HPDAC0957E
The rule %s is invalid because the template match statement does not match one of the minimum required paths of /XMLADI or XMLADI.
HPDAC0958E
The rule was found to have no identifiable ADI to use when evaluating the rule.
HPDAC0959E
Rule %s was found to have no identifiable ADI to use when evaluating the rule.
HPDAC0960E
The rule has a null entry in the compiled rules cache.
HPDAC0961E
Rule %s has a null entry in the compiled rules cache.
HPDAC0962E
The XSL prolog entry specifies an XSL output method other than 'text', which is an invalid processor setting for rules evaluation.
HPDAC0963E
The XSL prolog asks the XSL processor to generate an XML declaration in the output from a rule evaluation. This setting is invalid.
HPDAC0964E
The method of output encoding specified for the XSL processor is invalid for the purposes of rule evaluation.
HPDAC0965E
The parsing of the compiled XSL rule returned an invalid element pointer.
HPDAC0966E
The parsing of the compiled XSL rule returned an invalid template match string pointer.
HPDAC0967E
An invalid XSL operation was encountered while parsing the compiled XSL rule.
HPDAC0968E
The rule does not return a valid result tag to the authorization engine.
HPDAC0969E
Rule %s does not return a valid result tag to the authorization engine.
HPDAC0970E
The rule contains an absolute XPath that doesn't include the top-level document element /XMLADI.
HPDAC0971E
The XSL prolog contains an XML namespace declaration for the default namespace. The default namespace is reserved for use by Security Access Manager.
HPDAC0972E
The XSL prolog contains a namespace declaration that has an invalid URI.
HPDAC0973E
The XSL prolog contains a namespace declaration that has no prefix to URI assignment.
HPDAC0974E
The XSL prolog contains a duplicate namespace prefix or URI declaration.
HPDAC0975E
The XSL prolog contains a namespace declaration for the prefix 'xsl'. This prefix is reserved for the XSLT language namespace.
HPDAC0976E
An unexpected Xalan processor exception was caught during rule processing. Refer to the error log for more information about the exception.
HPDAC0977E
An unexpected Xalan processor exception was caught during rule processing. Error message %s was returned with the exception.
HPDAC0978E
A predicate expression using the /XMLADI top-level document element cannot be used in an authorization rule.
HPDAC0979E
The result string returned from the rule evaluation is greater than the maximum result buffer size of 1023 bytes.
HPDAC0980E
A value added to the azn_cred_groups attribute is not a string value.
HPDAC0981E
The request to add group memberships to the user credential from an entitlement service was denied.
HPDAC0982E
The code set parameter specified is not one of the valid code set name constants expected by the aznAPI runtime.
HPDAC1596E
aznAPI -- Modification of the attribute is prohibited.
HPDAC1597E
aznAPI -- azn_init_ssl_local_domain cannot override the SSL-local-domain entry in the aznAPI client configuration file.
HPDAC1598E
aznAPI -- Uninitialized Mechanism Info structure.
HPDAC1650E
AZN Entitlements Extended Attributes Service - app_context does not contain any attribute names.
HPDAC1651E
AZN Entitlements Extended Attributes Service - app_context contains more than one attribute name.
HPDAC1652E
AZN Entitlements Extended Attributes Service - app_context contains an invalid attribute name.
HPDAC1653E
AZN service plug-in %s failed to shutdown (0x%x/0x%x).
HPDAC1654E
The SOAP client of the AMWebARS entitlement service returned an error.
HPDAC1655E
The SOAP client of the AMWebARS entitlement service returned the error code: %d.
HPDAC1656E
The AMWebARS entitlement service returned the internal error: %s.
HPDAC1657E
The AMWebARS entitlement service URL is NULL.
HPDAC1658E
An error occurred loading the aznAPI configuration file.
HPDAC1659W
No configuration file specified for the credential attributes entitlement service %s.
HPDAC1660W
No service configuration information was found in the specified file %s.
HPDAC1661W
The registry operations for source %s failed.
HPDAC1667E
The AXIS client of the AMWebARS entitlement service returned the error
: %s.
HPDAC1668E
The AXIS client of the AMWebARS entitlement service returned the unkno
wn error.
HPDAC1669E
An unexpected AXIS exception was caught during the call to AMWebArs we
b service. Refer to the error log for more information about the exception.
HPDAC1670E
An unexpected AXIS exception was caught during the call to AMWebArs we
b service. Error message %s was returned with the exception.
HPDAZ0256E
Zero or more than one base entry is configured for the custom repository [ %s ]. Only one base entry is allowed.
HPDAZ0257E
The custom configuration property [ %s ] and its value [ %s ] is either invalid or incorrect.
HPDAZ0258E
Cannot modify the entity property [ %s ]. The Security Access Manager custom registry
adapter for WebSphere Virtual member manager does not support renaming an entity.
HPDAZ0500E
Configuration error: This application server's account is marked invalid.
HPDAZ0501E
Configuration error: This application server's account is unknown.
HPDAZ0502E
Transmission error: No response from server at %s, port %d.
HPDAZ0503E
Transmission error: Could not connect to the server, and no alternative servers are configured.
HPDAZ0504E
Failover error: cannot contact a configured server.
HPDAZ0512E
The Security Access Manager custom registry adapter for WebSphere Virtual member manager (VMM) cannot update group membership
for group [ %s ] . Security Access Manager does not support nested groups.
HPDAZ0514W
The LDAP server is an IBM Tivoli Directory Server and is running
in configuration only mode. Security Access Manager will not be able to
operate normally with the LDAP server in this mode.
HPDAZ0600E
Invalid argument: Null URL on constructor.
HPDAZ0601E
Invalid argument: Could not convert port number to an integer.
HPDAZ0602E
Corrupted file: Insufficient information to contact a Policy Server.
HPDAZ0603E
Corrupted file: Insufficient information to contact an Authorization Server.
HPDAZ0604E
Invalid argument: Duplicate server specified.
HPDAZ0605E
Corrupted configuration: Cannot use keystore.
HPDAZ0768E
Value '%s' is not valid for option '%s'. It must be one of 'true' or 'false'
HPDAZ0769E
Invalid value '%s' for option '%s'. It must be an integer in the range %s to %s
HPDAZ0770E
Invalid value '%s' for option '%s'. The value must be a non-empty list of values separated by '%s' characters.
HPDAZ0771E
The password for '%s' can not be zero characters in length.
HPDAZ0772E
At least one LDAP server must be specified for option '%s'.
HPDAZ0773E
Option '%s' has an LDAP server entry '%s' which is not valid. It must be of the form 'host:port:type:rank'
HPDAZ0774E
Option '%s' has entry '%s' with a port value '%s' that is not valid. It must be an integer in the range 1 to 65535.
HPDAZ0775E
Option '%s' has entry '%s' with a server type '%s' that is not valid. Use one of 'readwrite' or 'readonly'
HPDAZ0776E
Option '%s' has entry '%s' with a server rank '%s' that is not valid. The rank must be an integer in the range 1 to 10.
HPDAZ0777E
For option '%s' the '%s' must be a valid file that exists.
HPDAZ0779E
The configuration properties file '%s' already exists.
HPDAZ0780E
An unknown configuration property name '%s' was provided. Use one of: %s.
HPDAZ0781E
The option '%s' is required and can not be removed.
HPDAZ0782E
Unable to create the configuration property file '%s', error '%s'.
HPDAZ0783E
Unable to write to configuration properties file '%s', error '%s'.
HPDAZ0784E
Unable to open configuration properties file '%s' for reading. Error '%s'.
HPDAZ0785E
Unable to read propertes from configuration properties file '%s'. Error '%s'
HPDAZ0786E
The input properties file is missing the required 'ldap.ssl-truststore' property.
HPDAZ0787E
The input properties file is missing the required 'ldap.ssl-truststore-pwd' property.
HPDAZ0788E
The input properties file is missing the required '%s' property.
HPDBA0100E
No data accompanied the server response to the request.
HPDBA0296E
The SSL communications could not be completed. An incorrectly formatted SSL message was received from the partner.
HPDBA0297E
Timeout expired. The timeout period elapsed before obtaining a connection from the client to the server.
HPDBA0298W
Certified FIPS mode is not available on this platform because the underlying FIPS provider is not currently certified. Security Access Manager will run in non-certified FIPS mode.
HPDBA0301E
The protected object policy specified was not found.
HPDBA0302E
Policy is attached to one or more protected objects. A policy cannot be deleted while it is still attached.
HPDBA0303E
A protected object policy with this name already exists.
HPDBA0305E
The protected object policy cannot be attached to the specified protected object. The protected object has been marked to not accept the protected object policy.
HPDBA0306E
The ACL cannot be attached to the specified protected object. The protected object has been marked to not accept the ACL policy.
HPDBA0309E
Invalid authorization rule text string.
HPDBA0310E
The authorization rule specified was not found.
HPDBA0311E
An authorization rule with this name already exists.
HPDBA0312E
The authorization rule cannot be attached to the specified protected object. The protected object has been marked to not accept protected object policies.
HPDBA0313E
The authorization rule is attached to one or more protected objects. The authorization rule cannot be deleted while it is still attached
HPDBA0605W
Warning mode is enabled for this protected object policy
(POP). Complete access to the protected object using this POP is permitted
regardless of other restrictions in the POP.
HPDBA0608E
Unable to map interface name '%s' to address. getaddrinfo returned error %d: %s.
HPDBF0020E
The specified JRE (%s) version (%s) does not meet supported JRE version requirement.Consult the manual for a list of supported JREs.
HPDBF0021E
This Java Runtime Environment (%s) has already been configured. Unconfigure first then retry the command.
HPDBF0022E
This Java Runtime Environment (%s) has already been configured. Unconfigure first or specify a different JRE path then retry the command.
HPDBF0025E
Unable to create the PD.properties file in the specified JRE.Ensure you have the correct permissions to do so.
HPDBF0026W
Unable to rename the PD.properties file.
HPDBF0027E
An error occurred while creating PD.properties file.
HPDBF0029E
No JRE has been configured. Unable to unconfigure %s.
HPDBF0030W
The JRE (%s) is notconfigured for the Security Access Manager Runtime for Java.
HPDBF0031E
This Java Runtime Environment has already been configured.
HPDBF0032E
There was an internal error during initialization.
HPDBF0073W
Unable to stop IBM WebSphere Application Server.
HPDBF0075W
Unable to Regenerate IBM WebSphere Application Server Plugin Configuration.
HPDBF0078W
Unable to start IBM WebSphere Application Server.
HPDBF0080E
Unable to deploy Security Access Manager Web Portal Manager.
HPDBF0083E
The Security Access Manager runtime must be configured first.
HPDBF0084E
Unable to perform SvrSslCfg configuration forSecurity Access Manager Web Portal Manager.
HPDBF0085E
Unable to find the iscwpm.war directory. Make sure that the WPM application is deployed in the WebSphere systemApps directory.
HPDBF0086E
The WebSphere server installation full path is not valid.Possible causes are:
Make sure you have installed a supported version of WebSphere.
Make sure you have configured Security Access Manager Runtime for Java
to this WebSphere Java path.
HPDBF0087E
The Security Access Manager Web Portal Manager has already been configured.
HPDBF0088E
The Security Access Manager Web Portal Manager has already been unconfigured.
HPDBF0089E
Unable to configure Security Access Manager Runtime for Java into the IBM WebSphere Application Server.
HPDBF0091E
Security Access Manager Web Portal Manager could not be removedfrom WebSphere. Continuing with the unconfig operation.
HPDBF0094E
Unable to unconfigure Security Access Manager Runtime for Javafrom IBM WebSphere Application Server.
HPDBF0095E
The SvrSslCfg unconfiguration command cannot be performedfor Security Access Manager Web Portal Manager.
HPDBF0097E
IBM WebSphere Application Server plug-in configuration could not be regenerated.
HPDBF0098E
The Windows registry could not be opened.
HPDBF0099E
The registry key value could not be set.
HPDBF0100E
The IBM HTTP server installation path could not be obtained.
HPDBF0101E
The httpd.conf file could not be modified. SSL is not available for connecting toSecurity Access Manager Web Portal Manager.
HPDBF0102E
The pdwpm.conf file could not be modified.
HPDBF0116E
The port number is not valid. The port must be an integer greater than or equal to zero.
HPDBF0119E
The local host name cannot be obtained. Specify the host name using the -
policysvr option.
HPDBF0120E
Could not contact the Security Access Manager policy server. Possible causes are:The Policy server is not running.The Policy server host name or port number is incorrect.
HPDBF0122E
The value specified for -action option (%s) was not valid.
The value must be one of the following: config|unconfig|status|name
HPDBF0237E
The mode value is invalid. The value must be 'remote' or 'local'.
HPDBF0238E
The server option is invalid. Specify one policy server or authorization server parameter.
HPDBF0239E
The listening option is invalid. The value must be 'true' or 'false'.
HPDBF0240E
The refresh interval is invalid. The value must be an integer
greater than or equal to zero.
HPDBF0247E
The local host name cannot be obtained. Specify the host name using the -host option.
HPDBF0248W
The following options are ignored when configuring a remote-mode
server: %s
HPDBF0250E
The certificate refresh is invalid. The value must be true or
false.
HPDBF0253E
The SSL V3 protocol enable flag is invalid. The value must be true or
false.
HPDBF0255E
The TLS V1.0 protocol enable flag is invalid. The value must be true or
false.
HPDBF0257E
The TLS V1.1 protocol enable flag is invalid. The value must be true or
false.
HPDBF0259E
The TLS V1.2 protocol enable flag is invalid. The value must be true or
false.
HPDBF0283E
Invalid LDAP SSL information was entered.
HPDBF0289E
Incorrect Security Access Manager administrator name or password.
HPDBF0292E
The PDMgrProxyd service could not be deleted.
HPDBF0295E
An error occurred while unconfiguring the Security Access Manager proxy server.
HPDBF0298E
Security Access Manager runtime must be configured first.
HPDBF0299E
Security Access Manager policy server has already been unconfigured.
HPDBF0300E
The PDMgrProxyd service could not be deleted.
HPDBF0301E
The PDMgrProxyd service could not be registered.
HPDBF0302E
An error occurred opening configuration file.
HPDBF0303E
An error occurred while unconfiguring the Security Access Manager proxy server.
HPDBF0304E
A memory allocation error resulted in the termination of the program.
Check the maximum allowable memory and the amount of system paging space
as these may both need to be increased.
HPDBF0305E
An error occurred while starting the Security Access Manager policy proxy server.
HPDBF0348W
An error occurred while checking the properties of the target Java Runtime Environment (%s). The JRE might need post-configuration modification.
HPDBF0349E
The Java Runtime Environment (%s) cannot be configured. Configure by using the pdjrtecfg command in non-interactive mode.
HPDBF0350E
Unable to start Security Access Manager Web Portal Manager.
HPDBF0351W
An error occurred while restoring the original state of the target Java Runtime Environment (%s). The JRE might need post-unconfiguration modification.
HPDBF0352W
The temporary file %s cannot be deleted. Manually delete the file.
HPDBF0358E
Could not contact the Security Access Manager authorization server. Possible causes are:The Authorization server is not running.The Authorization server host name or port number is incorrect.
HPDBF0366E
Could not contact the Security Access Manager authorization server. Possible causes are:The Authorization server is not running.The Authorization server host name or port number is incorrect.
HPDBF0367E
Could not contact the WebSphere server. Possible causes are:The WebSphere server is not running.The WebSphere server host name or port number is incorrect.
HPDBF0368E
Could not find a IBM WebSphere Application Server or Cluster. Possible causes are:The WebSphere server host name or port number is incorrect.
The specified cluster or application server is invalid.
HPDBF0369E
Invalid hostname for the Security Access Manager policy server. Possible causes are:The Policy server host name is incorrect.
HPDBF0370E
Invalid hostname for the Security Access Manager authorization server. Possible causes are:The Authorization server host name is incorrect.
HPDBF0371E
Invalid hostname for the WebSphere server. Possible causes are:The WebSphere host name is incorrect.
HPDBF0372E
The required option (%s) was not specified.
HPDBF0388E
Unable to create the PDJLog.properties file in the specified JRE.Ensure you have the correct permissions to do so.
HPDBF0399E
The Security Access Manager Runtime for Java cannot run with the FIPS mode set.
HPDBF0413E
The Security Access Manager Runtime for Java installed within the JRE (%s) version (%s) is outdated.Upgrade the Security Access Manager Runtime for Java.
HPDBG0005E
This script must be executed by 'root' (uid = 0).
HPDBG0017E
The policy server must first be installed in the secure domain.Install the Security Access Manager policy server on one of the systemsin your secure domain and retry the command.
HPDBG0019W
The policy server is not running in this secure domain.Start the policy server and retry the command.
HPDBG0028W
The parent directory does not exist.Cannot create the document root directory.
HPDBG0117W
LDAP client version %s does not appear to be installed.The LDAP client must be installed and configured in order to use the LDAP user registry.
HPDBG0119W
Configure the net package before the trap package. The configuration failed.
HPDBG0123W
Unconfigure the authorization server package before the base package. The unconfiguration failed.
HPDBG0131W
This package is partially configured.Unconfigure this package before configuring it. To unconfigure,return to the Security Access Manager Configuration Menu and select Exit.
HPDBG0147W
Configure the Security Access Manager Runtime package before this package. The configuration failed.
HPDBG0148W
Configure the Security Access Manager Runtime package before the Net package. The configuration has failed.
HPDBG0149W
Configure the runtime package before the authorization server package. The configuration failed.
HPDBG0150W
Unconfigure the policy server package before the runtime package. The unconfiguration failed.
HPDBG0151W
Unconfigure the authorization server package before the runtime package. The unconfiguration failed.
HPDBG0152W
Unconfigure the Net package before the runtime package. The unconfiguration failed.
HPDBG0153W
Could not initialize the SSL configuration.
HPDBG0154W
Could not initialize the Base SSL configuration.
HPDBG0163W
Install all required Security Access Manager packageson the system before running pdconfig.
HPDBG0164W
Configure the runtime package before the application developer kit. The configuration failed.
HPDBG0165W
Configure the runtime package before the console package. The configuration failed.
HPDBG0166W
Unconfigure the application developer kit before the runtime package.
HPDBG0167W
Unconfigure the console package before the runtime package.
HPDBG0192W
Unconfigure the Web package before the policy server package. The unconfiguration failed.
HPDBG0193W
Unconfigure the Web package before the runtime package. The unconfiguration failed.
HPDBG0205W
Some packages have not been upgraded yet.Upgrade the remaining packages and retry the command.
HPDBG0211W
Configure the policy server before the authorization server. The configuration failed.
HPDBG0212W
Configure the policy server before the net package. The configuration failed.
HPDBG0213W
Configure the policy server before the Web package. The configuration failed.
HPDBG0214W
The version of the installed LDAP client must be %s or higher.
HPDBG0215W
Security Access Manager policy server must be upgraded on the system.
HPDBG0217W
The LDAP server host name does not exist.
HPDBG0232E
Load the Security Access Manager schema entries.
HPDBG0275W
The necessary LiveCONTENT directory components have not been installed.They must be installed before configuration can continue.
HPDBG0277W
Security Access Manager policy server (%s,%s) cannot be contacted.
HPDBG0278E
Login to the Security Access Manager policy server failed.Ensure that the password is correct and the policy server is running, then retry the command.
HPDBG0284E
Unable to read necessary files. Ensure read permission is set forthe current user on the following files located in the directory specifiedabove: ivmgrd.conf, ivmgrd.kdb, ivmgrd.sth, pdcacert.b64
HPDBG0297W
Unconfigure the policy proxy server before the policy server. The unconfiguration failed.
HPDBG0298W
Unconfigure the policy proxy server before the runtime package. The unconfiguration failed.
HPDBG0322E
The specified administrator ID is not authorized to configurethe server. Check the ID, password, and port and be sure the policy serveris configured and running.
HPDBG0323E
The specified administrator ID is not authorized to configurethe server. Check the ID, password, and port and be sure the policy serveris configured and running.
HPDBG0327E
LDAP client version %s does not appear to be installed.The LDAP client must be installed to use the Active Directory user registry.
HPDBG0331E
The version of the installed %s must be %s or higher.
HPDBG0348E
The environment variable JAVA_HOME must be set to an existing valid JRE before executing this command.
HPDBG0349E
The LDAP client package %s, version %s does not appear to be installed.
HPDBG0350E
The Tivoli Common Logging directory cannot be a relative directory.
HPDBG0351E
The Tivoli Common Logging directory cannot be created.
HPDBG0358E
The management domain name, %s,already exists within LDAP.
HPDBG0367E
Instance '%s' is already configured ('%s').
HPDBG0812E
An Administrative account must be used to run this program.
HPDBG0813E
Security Access Manager registry entries could not be created.
HPDBG0857W
The Security Access Manager Policy Server is already configured in this secure domain.The Security Access Manager Policy Server must be removed completely before installing.
HPDBG0858W
The Security Access Manager Policy Server appears to be configured on another machine in the secure domain. The local Security Access Manager Policy Server cannot be unconfigured.
HPDBG0992E
Notes_ExecDirectory environment variable not set.
HPDBG0993E
The Notes install directory is not in the PATH
HPDBG0994E
The EXTMGR_ADDINS parameter is not set in notes.ini.
HPDBG0997W
The notes.ini file does not exist in the Windows directory.
HPDBG1005E
Could not contact the LDAP server. Possible causes are:The LDAP server is not running.The LDAP server host name or port is incorrect.There is an SSL configuration mismatch between Security Access Manager and the registry server.
HPDBG1006E
Could not contact the Security Access Manager Policy Server.Ensure that you have specified a valid host name and port number and that Security Access Manager Policy Server is started before retrying this operation.
HPDBG1007W
Could not get the TCP/IP host name of local machine.
HPDBG1032W
You are not authorized to update the schema!
HPDBG1049W
Unable to read necessary files. Make sure that the readpermission is set for the current user on the following files located inthe directory specified: ivmgrd.conf, ivmgrd.kdb, ivmgrd.sth, pdcacert.b64
HPDBG1054W
Cannot contact the host server.Possible causes are:The host server is not running.The host server name is incorrect.
HPDBG1056W
Could not contact the Domino server. Possible causes are:The Domino server is not running.The Domino server host name is incorrect.The Notes client password is incorrect for the active Notes ID file.Verify that information and then unconfigure and reconfigure the Runtime component with the correct values.
HPDBG1080E
Could not contact the Security Access Manager Policy Server.Ensure that you have specified a valid ID, password and domain name and that Security Access Manager Policy Server is started before retrying this operation.
HPDBG1083E
Error: Command %s failed (0x%x). Make sure java is in the path.
HPDBG1096E
The environment variable JAVA_HOME must be set to an existing valid JRE before executing this command.
HPDBG1097E
The Security Access Manager License registry key is missing.
HPDBG1098E
Security Access Manager License is not installed.
HPDBG1099E
Security Access Manager License is not at the required version level.
HPDBG1100E
Security Access Manager Policy Server must be unconfigured before it is removed.
HPDBG1101E
Security Access Manager policy proxy server must be unconfigured before it is removed.
HPDBG1102E
Security Access Manager Authorization Server must be unconfigured before it is removed.
HPDBG1104E
Could not contact the Active Directory server. Possible causes are:The Active Directory server is not running.The Active Directory Global Catalog server is not running.The Active Directory server host name or domain is incorrect.
HPDBG1105E
The domain name is different from the local domain and Security Access Manager Policy Server is installed on this machine.If the Policy Server is to be configured on this machine, make sure the domain is correct.If Security Access Manager is configured with the Active Directory multiple domains option, make sure this domain is the root of the Active Directory forest. Policy Server must be installed and configured on the root domain of the forest.When using an LDAP client to communicate with the Active Directory server for a Security Access Manager blade server or user application it's necessary to remove the Security Access Manager Policy Server package then retry the configuration.
HPDBG1106E
Invalid authentication information. Either the Active Directory admin ID doesn't exist or the admin password is incorrect.
HPDBG1107E
Unable to locate the Active Directory data location information. Make sure the Active Directory domain is up and running or check to make sure the distinguished name for the data location exists on the Active Directory server before using it.
HPDBG1120E
The pdcacert.b64 file could not be downloaded from the policy server.
HPDBG1133W
The management domain location DN, %s, was not found in the LDAP server. Create the location DN on the LDAP server or specify a different one.
HPDBG1137E
The windows socket library could not be loaded.
HPDBG1156E
The file %s could not be deleted. Errno %d
HPDBG1169W
The compliance type is not valid. It must be one of: none, fips, sp800-131-transition, sp800-131-strict, suite-b-128, suite-b-192.
HPDBI0285E
An error occurred while installing %s patches.
HPDCF0002E
A memory allocation error resulted in the termination of the program.
Check the maximum allowable memory and the amount of system paging space
as these may both need to be increased.
HPDCF0003E
The file, %s, could not be opened. Ensure that file exists and that the file permissions allow access.
HPDCF0004E
The file, %s, could not be read. Ensure that file exists and that the file permissions allow read access.
HPDCF0005E
The current time could not be obtained.
HPDCF0006E
The file, %s, could not be modified. Ensure that file exists and that the file permissions allow write access.
HPDCF0009E
The installation directory could not be determined. Ensure that the product
is installed correctly.
HPDCF0033E
The file, %s, is in use.You must stop the server or application before using this command.
HPDCF0052E
The request to change the key file password failed.
HPDCF0053E
The request to renew the server certificate failed.
HPDCF0054E
An operating system function for obtaining the local TCP/IP host name has failed. The error code is %d.
HPDCF0055E
Socket initialization failed. The error code is %d.
HPDCF0057E
A replica entry for the specified host name already exists in the configuration file.
HPDCF0058E
A replica entry for the specified host name was not found in the configuration file.
HPDCF0059E
A replica entry in the configuration file is corrupted.
HPDCF0060E
The user registry type cannot be determined. Ensure that Security Access Manager
runtime is properly installed and configured.
HPDCF0061E
The function, %s, returned the error code: 0x%8.8lx.
HPDCF0062E
Could not connect to the Security Access Manager policy server. Error code is 0x%8.8lx.Ensure that the policy server host name, port and local domain name are correct.
HPDCF0074E
The keyring database files already exist. This indicates that the server might
already be configured or partially configured.
HPDCF0079E
SSL configuration failed. The error code is 0x%8.8lx.
HPDCF0084E
File %s is missing essential information.You must first use the -config action to create the initial configuration file.
HPDCF0085E
The configuration file %s is not valid.Ensure that Security Access Manager runtime is properly configured.
HPDCF0086E
The configured user registry type is not supported.
HPDCF0101E
Configuration cannot be performed for server %s.File %s already exists.
The server might already be configured.
HPDCF0104W
This usage is deprecated. Refer to the help for the correct usage of this command.
HPDCF0116E
The keyring database or file, %s, could not be modified. Ensure that file exists and that the file permissions allow write access.
HPDCF0117E
An error occurred in the IKeyMan API. Configuration failed.
HPDCF0118E
Configuration failed. The specified configuration file does not exist
or you do not have the proper permissions to access the configuration file.
HPDCF0120E
An application server with the specified name is already configured.
You must use a different name or unconfigure the existing application
HPDCF0122E
If listen mode is enabled, the listening port must be specified with the -r parameter.
HPDCF0123E
The currently configured SSL listening port number cannot be zero if listening mode is enabled.
HPDCF0126W
The Security Access Manager policy server has been configured to disallow downloading of its CA certificate. A root CA certificate base64 file must be available on the local machine in order to configure.
HPDCF0127E
Download of the root CA certificate failed. Ensure that the
Security Access Manager policy server host and port are specified correctly and
that the correct version of the policy server is configured and running properly.
HPDCF0129W
The value %s of ca-cert-download-enabled keyword in ivmgrd.conf file is incorrect. Acceptable values are yes or no. Downloading of the secure domain's root CA certificate is disabled.
HPDCF0133E
The Security Access Manager policy server is not responding. Verify the
host name and port, and verify that the server is started.
HPDCF0134E
A listening port number of zero is allowed only if the
[aznapi-admin-services] stanza in the configuration file is empty.
HPDCF0140E
The keyring database could not be located using the specified
configuration file.
HPDCF0157E
The specified configuration file does not exist or you do not have the proper permissions to access the file.
HPDCF0158E
The specified stanza/key pair does not exist in the specified configuration file.
HPDCF0159E
The specified configuration file may be corrupted.
HPDCF0160E
Unknown error occurred while reading and writing to the configuration file.
HPDCF0161E
The configuration file is missing essential information.
HPDCF0164E
Configuration failed. An error occurred creating the specified DN,
accessing a configuration file, or setting up the keyfile.
HPDCF0165E
Cannot display configuration file information from the obfuscated version of the file.
HPDCF0166E
Cannot modify information in the specified version of the configuration file because it exists in the alternate version.
HPDCF0170E
Instance '%s' is already configured ('%s').
HPDCF0179E
The compliance value '%s' is not valid for ssl-compliance in pd.conf. It must be one of the following values: 'none', 'fips', 'sp800-131-transition', 'sp800-131-strict', 'suite-b-128', 'suite-b-192'.
HPDCF0180E
The -C compliance value '%s' is not valid and must be one of the following values: 'none', 'fips', 'sp800-131-transition', 'sp800-131-strict', 'suite-b-128', 'suite-b-192'.
HPDIA0226W
The login for user %s was rejected due to a policy violation.
HPDIA0227W
The account for user %s has been disabled.
HPDIA0228W
A client certificate for user %s could not be authenticated.
HPDIA0229W
IP address authentication failed for address %s.
HPDIA0230E
The supplied username %s does not exist in the registry.
HPDIA0231E
Administrator %s does not have permission to use switch username on this account.
HPDIA0232W
The data contained in the HTTP header failed authentication.
HPDIA0233W
Authentication failed. You have used an invalid password. This account has been temporarily locked due to too many failed login attempts.
HPDIA0234W
Authentication failed. You have used an invalid password. This account has been disabled due to too many failed login attempts.
HPDIA0235W
Authentication for user %s failed. You have used an invalid password. This account has been temporarily locked due to too many failed login attempts.
HPDIA0236W
Authentication for user %s failed. You have used an invalid password. This account has been disabled due to too many failed login attempts.
HPDIA0237W
Authentication failed. The account could not be logged into as the password has expired.
HPDIA0238W
Authentication for user %s failed. The account could not be logged into as the password has expired.
HPDIA0239W
Authentication failed. The account is locked.
HPDIA0240W
Authentication for user %s failed. The account is locked.
HPDIA0241W
Authentication failed. The account is deactivated.
HPDIA0242W
Authentication for user %s failed. The account is deactivated.
HPDIA0300W
Password rejected due to policy violation.
HPDIA0301W
Password rejected due to minimum length policy.
HPDIA0302W
Password rejected due to the spaces policy.
HPDIA0303W
Password rejected due to the maximum repeated characters policy.
HPDIA0304W
Password rejected due to the minimum alphabetic characters policy.
HPDIA0305W
Password rejected due to the minimum non-alphabetic characters policy.
HPDIA0306W
This account has been temporarily locked out due to too many failed login attempts.
HPDIA0307W
Post password change processing for user %s failed.
HPDMG0155E
Too many subjects found within the client credential.
HPDMG0156E
Unable to sign a certificate. Unexpected error from %s (0x%8.8lx).
HPDMG0157E
The policy server failed to sign a certificate.
HPDMG0158E
Could not open %s because the password stash file does not exist or is corrupted.
HPDMG0160E
SSL database (ivmgrd.kdb) could not be opened.
HPDMG0162E
ASN1 decode error %d occurred. The certificate buffer received is invalid and cannot be decoded.
HPDMG0164E
The Policy Server could not be started (0x%8.8lx).
HPDMG0165W
The application has received a database update notification however the version of the command is incorrect. The policy database will not be updated.
HPDMG0166W
Memory allocation failure. Attempted to allocate %d bytes of memory.
HPDMG0167E
Domain in the certificate to be signed does not match the local domain.
HPDMG0463E
A protected object %s was requested from the %s application. The application returned the following error: (0x%8.8lx).
HPDMG0464E
A list of child protected objects under the parent protected object %s was requested from the %s application. The application returned the following error: (0x%8.8lx).
HPDMG0465E
An administration task was forwarded to the %s application. The application returned the following error: (0x%8.8lx).
HPDMG0466E
A list of supported administration tasks was forwarded to the %s application. The application returned the following error: (0x%8.8lx).
HPDMG0467E
A policy database update notification was sent to the %s application. The application returned the following error: (0x%8.8lx).
HPDMG0609E
The specified group container cannot be used as it corresponds to an existing group name.
HPDMG0611E
This operation is not supported for the objects in this object space.
HPDMG0612E
The operation requested cannot be performed on the root object.
HPDMG0613E
One or more of the child object names was invalid.
HPDMG0614W
One or more ACL entries contain both the Add (A) and Password (W) capabilities. These capabilities potentially create a security vulnerability if they are granted to an administrator of a group. The administrator may then add any user to the group and then change the user's password.
HPDMG0615W
One or more ACL entries contain both the Add (A) and Modify (m) capabilities. These capabilities potentially create a security vulnerability if they are granted to an administrator of a group. The administrator may then add any user to the group and then change the user's data.
HPDMG0616W
One or more ACL entries contain both the Add (A) and Delete (d) capabilities. These capabilities potentially create a security vulnerability if they are granted to an administrator of a group. The administrator may then add any user to the group and then delete the user.
HPDMG0619E
The user is not authorized to view attached ACL information.
HPDMG0620E
The user is not authorized to view attached POP information.
HPDMG0621E
The user is not authorized to view attached Rule information.
HPDMG0622E
The user is not authorized to view effective ACL information.
HPDMG0623E
The user is not authorized to view effective POP information.
HPDMG0624E
The user is not authorized to view effective Rule information.
HPDMG0625E
The user is not authorized to view one or more protected objects where the requested ACL is attached.
HPDMG0626E
The user is not authorized to view one or more protected objects where the requested POP is attached.
HPDMG0627E
The user is not authorized to view one or more protected objects where the requested authzrule is attached.
HPDMG0628E
The specified network addresses cannot be processed by the Security Access Manager policy server.
HPDMG0752E
More than one matching Distinguished Name (DN) was found.
HPDMG0753E
An invalid format of the authorization mechanism attribute was found in the user entry.
HPDMG0754W
The entry was not found. If a user or group is being created, ensure that the Distinguished Name (DN) specified has the correct syntax and is valid.
HPDMG0755W
The specified Distinguished Name (DN) does not exist.
HPDMG0769E
There were insufficient LDAP access privileges to allow Security Access Manager to create and delete entries in the registry.
HPDMG0770E
The settings defined for the entry are invalid (object class violation).
HPDMG0771E
Cannot delete the entry completely because it has unexpected subentries in the LDAP registry. This is usually because the user or group being deleted is a member of another domain.
HPDRA0068E
The specified destination (%s) is invalid.
HPDRA0192E
Statistics gathering is already registered for this component.
HPDRA0193E
Statistics gathering is not registered for this component.
HPDRA0194E
Statistics gathering for this component is already on.
HPDRA0195E
Statistics gathering for this component is always on.
HPDRA0196E
Statistics gathering for this component is not on.
HPDRA0197E
The structure containing statistics gathering functions is invalid.
HPDRA1091E
The specified component has not been registered with the framework.
HPDRA1093E
The component is already writing transactional information to a file.
HPDRA1094E
A supplied transaction record is larger than the specified maximum file size: %d
HPDRA1095E
The filename must not contain any path information.
HPDRG0100E
The operation in the Active Directory registry for %s failed with return error %lx.
HPDRG0101E
The user password violates the Active Directory user password policies.
HPDRG0102E
An invalid user name or distinguished name (DN) was presented to Security Access Manager. The user name or DN may contain incorrect information, invalid characters or violates a registry user name limitation.
HPDRG0103E
The specified group is a dynamic group and dynamic group membership cannot be modified.
HPDRG0104E
The specified group is a registry dynamic group and Security Access Manager dynamic group support is not enabled.
HPDRG0105W
Unable to remove Security Access Manager meta data from Active Directory domain %s. Either the data doesn't exist in the Active Directory domain or this domain can not be contacted.
HPDRG0107E
The value of the userPrincipalName in the Active Directory registry is not unique. Duplicate userPrincipalName values are not allowed to be used for the Security Access Manager user or policy ID.
HPDRG0108E
The Active Directory Global Catalog server may be down or unreachable. The Global Catalog is required to be up and reachable from the Security Access Manager configured Active Directory domain.
HPDRG0109W
Unable to migrate user %s to the alternate userPrincipalName/e-mail format. Microsoft Active Directory Registry error: 0x%x.
HPDRG0150E
The registry object could not be found.
HPDRG0151E
Unable to load the IBM Directory client library.
HPDRG0152W
Unable to contact the Policy Server to create the registry handle. The Policy Server may be down.
HPDRG0153E
Either Secure Socket Layer (SSL) support is not enabled or the SSL key file or key file password are missing or incorrect. If the 'change user password using LDAP APIs' option is enabled, SSL is required to be enabled with a valid key file and key file password.
HPDRG0154E
The Active Directory Global Catalog server hostname(s) is either missing or incorrect. The hostname(s) must be specified and reachable when the e-mail/UPN support is enabled.
HPDRG0200E
The specified group is a dynamic group and cannot be modified.
HPDRG0201E
Error code 0x%x was received from the LDAP server. Error text: %s.
HPDRG0202E
Unable to load the IBM Directory client library. The LDAP registry cannot be initialized.
HPDRG0203E
Unable to load the Access Control Information dynamic library. The LDAP registry cannot be initialized.
HPDRG0204E
The LDAP server is an IBM Tivoli Directory Server proxy and the required cn=itamproxy container is missing. The Policy Server cannot be configured.
HPDRG0205E
The LDAP server is an IBM Tivoli Directory Server proxy. The requested action cannot be performed with a proxy server.
HPDRG0206E
The secAuthority=Default suffix is required but was not found on the LDAP server. The requested operation cannot be performed.
HPDRG0207W
The LDAP server is an IBM Tivoli Directory Server and is running in configuration only mode. Security Access Manager will not be able to operate normally with the LDAP server in this mode.
HPDRG0208E
The %s suffix is required but was not found on the LDAP server. The requested operation cannot be performed.
HPDRG0209E
Ensure the LDAP administrator is a member of the CN=Administrators group of the partition.
HPDRG0210E
The requested operation cannot be performed. Ensure SSL has been configured with the ADAM instance or the ADAM SSL requirement for password operations has been disabled.
HPDRG0211E
The LDAP server reports a naming violation. Ensure the distinguished name (DN): %s is allowed by the LDAP server schema.
HPDRG0250E
A user that you tried to add to a group is already a member of that group
HPDRG0251E
A user registry request to the Domino database failed with return code %lx.