DISPLAY ROUTE command
Displaying blocked virtual routes:
- 1 When the BLOCKED operand is specified, the NETID of the host where the command was entered is assumed, and specification of another NETID is not permitted.
Abbreviations
Operand | Abbreviation |
---|---|
DISPLAY | D |
DESTSUB | DESTSA |
Purpose
The DISPLAY ROUTE command displays the status of explicit routes and virtual routes and tests whether a route is operational.
Operands
- Route selection
- Specifies which explicit routes or virtual routes are to be displayed.
A blank COS entry is used when no COSNAME entry has been coded in
the LOGMODE table for LU-LU sessions or when an ISTVTCOS entry for
SSCP-type sessions cannot be found.
- BLOCKED
- Displays the blocked Virtual Routes from the PU specified in ORIGIN for all destination Subarea combinations known to VTAM® through its current PATH table.
- COSNAME=name
- Specifies a Class of Service name. If this operand is
specified, all virtual routes to the specified destination subarea
within this Class of Service are displayed.
The Class of Service table associated with the origin node (where applicable) and the netid specified in the ORIGIN and NETID operands are used to resolve the Class of Service name to a list of virtual routes.
If COSNAME is specified, neither the BLOCKED, ER nor the VR operands can be specified.
- DESTSUB=subarea_number
- Specifies the subarea address of the destination subarea of the
routes to be displayed.
The BLOCKED and DESTSUB operands are mutually exclusive.
- ER=er_number
- Specifies the explicit route number (an integer 0–15). If this operand is specified, all the explicit routes identified
by this explicit route number that are defined to VTAM through activation of a path definition
statement are displayed. An explicit route becomes known to VTAM either by having been defined
at one time (through the activation of a path definition set defining
the ER), or by having been operative at one time (through the receipt
of an ER_OP request unit from the network).
If ER is specified, neither the BLOCKED, COSNAME nor the VR operands can be specified.
- ER=ALL
- Specifies that every explicit route to the specified destination
subarea is to be displayed.
If ER is specified, neither the BLOCKED, COSNAME nor the VR operands can be specified.
If COSNAME, ER, or VR options are not specified, then ER=ALL is assumed.
- VR=vr_number
- Specifies the virtual route number (an integer 0–7). If this operand is specified, the virtual routes identified by this
virtual route number to the specified destination subarea are displayed.
There can be up to three virtual routes identified by the virtual
route number, with one route for each of the three transmission priority
levels.
If VR is specified, neither the BLOCKED, COSNAME, nor the ER operands may be specified.
- HELD
- Displays the held virtual routes for the virtual routes that originate
in VTAM. When this command
is used, no other keywords are permitted. The NETID and ORIGIN of
the host where the command was entered is assumed. Note: Held virtual routes have a status of active.
- NETID=netid
- Specifies the network attached to the origin node that contains
the routes. VTAM sends the
requested NETID to the origin node in the route test request. The
request succeeds if the origin node can recognize the NETID. NETID
is a required start option.
If the netid specified is not the network in which the command is issued, or the host is not gateway capable, the ORIGIN operand is required for the command to succeed.
If you do not specify a NETID, the default is the network identifier supplied by the NETID option at start time.
When the BLOCKED operand is specified, the NETID of the host where the command was entered is assumed and specification of another NETID is not permitted.
- ORIGIN=ALL
- Used with the BLOCKED operand. Specifies that all PU type 4 and
5 nodes that serve as an origin of a route should be checked for blocked
Virtual Routes. As in the case where the subarea_pu_name is specified, VTAM must have an SSCP-PU session
with this node to forward a route display request to the node. Warning: The use of this operand may have a significant performance impact depending on the number of NCPs and destination subareas in the network. Therefore, it is recommended that this operand be used only when the diagnostic advantage is preferred over the performance impact.Note: Specifying an ORIGIN by name, instead of using ORIGIN=ALL, will greatly reduce the performance impact.
- ORIGIN=subarea_pu_name
- Specifies the node where the route starts. VTAM must have an SSCP-PU session with this
node to forward the route display request to the node. In addition,
the node must be an NCP subarea node or the host physical unit name
(as specified in the HOSTPU start option). The command fails if you
specify an external host subarea node because VTAM has no SSCP-PU session with the physical
unit in another host subarea.
The default for the ORIGIN operand is the host physical unit specified in the HOSTPU start option.
- TEST
- Specifies whether an explicit route test is to be performed for
a route to a destination subarea. Testing is not supported for APPN
routes.
If TEST is specified, the BLOCKED operand cannot be specified.
- TEST=YES
- Specifies that VTAM is
to perform an explicit route test for each explicit route contained
in the requested display. That is, if the VR operand is specified,
the explicit route defined to be used by the specified virtual route
is tested; if the COSNAME operand is specified, those explicit routes
defined to be used by the virtual routes within the specified Class
of Service are tested. When the test results are received, these test
results are sent to the operator that requested the display; however,
these test results are sent separately from the initial display results.
The test results include a display number that you can use to correlate
the results the original status display.
For an explicit route to be tested, it must be known to VTAM, either by having been defined at one time (through the activation of a path definition set defining the ER), or by having been operative at one time (through the receipt of an ER_OP request unit from the network).
If a node or link along a route becomes inoperative after the ER test request unit has been sent, VTAM might never receive any test results for that explicit route.
- TEST=NO
- Specifies that the requested route status is to be displayed, but that no explicit route test is to be performed.
Resulting display
- The subarea number of the nodes
- The origin of the physical unit (PU) name (if known)
- The destination of the PU name (if known)
- The network ID (where applicable) of the network attached to the origin PU that contains the routes
- The virtual route
- The transmission priority, status, explicit route number, adjacent subarea and its status, and the transmission group number
Examples
d net,route,destsub=01,netid=netc,origin=c0453le,vr=0
IST097I DISPLAY ACCEPTED
IST535I ROUTE DISPLAY 8 FROM SA 4 TO SA 1
IST808I ORIGIN PU = C0453LE DEST PU = C01NPU NETID = NETC
IST536I VR TP STATUS ER ADJSUB TGN STATUS CUR MIN MAX
IST537I 0 0 ACTIV 5 1 1 ACTIV3
IST537I 0 1 INACT 5 1 1 ACTIV3
IST537I 0 2 INACT 5 1 1 ACTIV3
IST314I END
d net,route,destsub=01,netid=netc,origin=a03n43a,er=5
IST097I DISPLAY ACCEPTED
IST535I ROUTE DISPLAY 7 FROM SA 4 TO SA 1
IST808I ORIGIN PU = C0453LE DEST PU = C01NPU NETID = NETC
IST536I VR TP STATUS ER ADJSUB TGN STATUS CUR MIN MAX
IST537I 0 0 ACTIV 5 1 1 ACTIV3
IST537I 0 1 INACT 5 1 1 ACTIV3
IST537I 0 2 INACT 5 1 1 ACTIV3
IST314I END
d net,route,destsub=01,netid=netc,origin=a0362zc,cosname=ist
IST097I DISPLAY ACCEPTED
IST535I ROUTE DISPLAY 4 FROM SA 31 TO SA 1
IST808I ORIGIN PU = A0362ZC DEST PU = ***NA*** NETID = NETC
IST536I VR TP STATUS ER ADJSUB TGN STATUS CUR MIN MAX
IST537I 0 2 ACTIV 0 1 1 ACTIV3
IST537I 1 2 INACT 1 1 1 ACTIV1
IST537I 2 2 INACT 2 1 1 ACTIV1
IST537I 3 2 INACT 3 1 1 ACTIV1
IST537I 4 2 INACT 4 1 1 ACTIV1
IST537I 5 2 UNDEF
IST537I 6 2 UNDEF
IST537I 7 2 UNDEF
IST537I 0 1 INACT 0 1 1 ACTIV3
IST537I 1 1 INACT 1 1 1 ACTIV1
IST537I 2 1 INACT 2 1 1 ACTIV1
IST537I 3 1 INACT 3 1 1 ACTIV1
IST537I 4 1 INACT 4 1 1 ACTIV1
IST537I 5 1 UNDEF
IST537I 6 1 UNDEF
IST537I 7 1 UNDEF
IST537I 0 0 ACTIV 0 1 1 ACTIV3
IST537I 1 0 INACT 1 1 1 ACTIV1
IST537I 2 0 INACT 2 1 1 ACTIV1
IST537I 3 0 INACT 3 1 1 ACTIV1
IST537I 4 0 INACT 4 1 1 ACTIV1
IST537I 5 0 UNDEF
IST537I 6 0 UNDEF
IST537I 7 0 UNDEF
IST314I END
d net,route,destsub=01,netid=netc,origin=a0362zc,cosname=ist,test=yes
IST097I DISPLAY ACCEPTED
IST535I ROUTE DISPLAY 6 FROM SA 31 TO SA 1
IST808I ORIGIN PU = A0362ZC DEST PU = ***NA*** NETID = NETC
IST536I VR TP STATUS ER ADJSUB TGN STATUS CUR MIN MAX
IST537I 0 2 ACTIV 0 1 1 ACTIV3
IST537I 1 2 INACT 1 1 1 ACTIV1
IST537I 2 2 INACT 2 1 1 ACTIV1
IST537I 3 2 INACT 3 1 1 ACTIV1
IST537I 4 2 INACT 4 1 1 ACTIV1
IST537I 5 2 UNDEF
IST537I 6 2 UNDEF
IST537I 7 2 UNDEF
IST537I 0 1 INACT 0 1 1 ACTIV3
IST537I 1 1 INACT 1 1 1 ACTIV1
IST537I 2 1 INACT 2 1 1 ACTIV1
IST537I 3 1 INACT 3 1 1 ACTIV1
IST537I 4 1 INACT 4 1 1 ACTIV1
IST537I 5 1 UNDEF
IST537I 6 1 UNDEF
IST537I 7 1 UNDEF
IST537I 0 0 ACTIV 0 1 1 ACTIV3
IST537I 1 0 INACT 1 1 1 ACTIV1
IST537I 2 0 INACT 2 1 1 ACTIV1
IST537I 3 0 INACT 3 1 1 ACTIV1
IST537I 4 0 INACT 4 1 1 ACTIV1
IST314I END
IST538I ROUTE TEST 6 IN PROGRESS
IST533I ER 0 SUCCEEDED IN ROUTE TEST 6
IST797I FROM VIA ADJACENT DEST ER LENGTH
IST644I A0362ZC TG ***NA*** ***NA***
IST533I ER 0 SUCCEEDED IN ROUTE TEST 6
IST534I 31 1 1 1 1
IST798I NETC
IST533I ER 1 SUCCEEDED IN ROUTE TEST 6
IST797I FROM VIA ADJACENT DEST ER LENGTH
IST644I A0362ZC TG ***NA*** ***NA***
IST534I 31 1 1 1 1
IST798I NETC
IST533I ER 2 SUCCEEDED IN ROUTE TEST 6
IST797I FROM VIA ADJACENT DEST ER LENGTH
IST644I A0362ZC TG ***NA*** ***NA***
IST534I 31 1 1 1 1
IST798I NETC
IST314I END
d net,route,destsub=01,netid=netc,origin=c0453le,er=5,test=yes
IST097I DISPLAY ACCEPTED
IST535I ROUTE DISPLAY 11 FROM SA 4 TO SA 1
IST808I ORIGIN PU = C0453LE DEST PU = C01NPU NETID = NETC
IST536I VR TP STATUS ER ADJSUB TGN STATUS CUR MIN MAX
IST537I 0 0 ACTIV 5 1 1 ACTIV3
IST537I 0 1 INACT 5 1 1 ACTIV3
IST537I 0 2 INACT 5 1 1 ACTIV3
IST314I END
d net,route,destsub=01,netid=netc,origin=a0362zc,test=yes
IST097I DISPLAY ACCEPTED
IST535I ROUTE DISPLAY 8 FROM SA 31 TO SA 1
IST808I ORIGIN PU = A0362ZC DEST PU = ***NA*** NETID = NETC
IST536I VR TP STATUS ER ADJSUB TGN STATUS CUR MIN MAX
IST537I 0 0 ACTIV 0 1 1 ACTIV3
IST537I 0 1 INACT 0 1 1 ACTIV3
IST537I 0 2 ACTIV 0 1 1 ACTIV3
IST537I 1 0 INACT 1 1 1 ACTIV1
IST537I 1 1 INACT 1 1 1 ACTIV1
IST537I 1 2 INACT 1 1 1 ACTIV1
IST537I 2 0 INACT 2 1 1 ACTIV1
IST537I 2 1 INACT 2 1 1 ACTIV1
IST537I 2 2 INACT 2 1 1 ACTIV1
IST537I 3 0 INACT 3 1 1 ACTIV1
IST537I 3 1 INACT 3 1 1 ACTIV1
IST537I 3 2 INACT 3 1 1 ACTIV1
IST537I 4 0 INACT 4 1 1 ACTIV1
IST537I 4 1 INACT 4 1 1 ACTIV1
IST537I 4 2 INACT 4 1 1 ACTIV1
IST314I END
IST538I ROUTE TEST 8 IN PROGRESS
IST533I ER 0 SUCCEEDED IN ROUTE TEST 8
IST797I FROM VIA ADJACENT DEST ER LENGTH
IST644I A0362ZC TG ***NA*** ***NA***
IST533I ER 0 SUCCEEDED IN ROUTE TEST 8
IST534I 31 1 1 1 1
IST798I NETC
IST533I ER 1 SUCCEEDED IN ROUTE TEST 8
IST797I FROM VIA ADJACENT DEST ER LENGTH
IST644I A0362ZC TG ***NA*** ***NA***
IST534I 31 1 1 1 1
IST798I NETC
IST533I ER 2 SUCCEEDED IN ROUTE TEST 8
IST797I FROM VIA ADJACENT DEST ER LENGTH
IST644I A0362ZC TG ***NA*** ***NA***
IST534I 31 1 1 1 1
IST798I NETC
IST314I END
d net,route,blocked,origin=ISTPUS
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = BLOCKED VIRTUAL ROUTES
IST535I ROUTE DISPLAY 1 FROM SA 1 TO SA 1
IST808I ORIGIN PU = ISTPUS DEST PU = NCP2B NETID = NETA
IST536I VR TP STATUS ER ADJSUB TGN STATUS CUR MIN
IST537I 0 0 BLCKD 0 1 1 ACTIV3
IST537I 0 1 BLCKD 0 1 1 ACTIV3
IST537I 0 2 BLCKD 0 1 1 ACTIV3
IST314I END
IST535I ROUTE DISPLAY 1 FROM SA 1 TO SA 2
IST808I ORIGIN PU = ISTPUS DEST PU = NCP4D NETID = NETA
IST536I VR TP STATUS ER ADJSUB TGN STATUS CUR MIN
IST537I 3 1 BLCKD 0 4 1 ACTIV3
IST537I 3 2 BLCKD 0 4 1 ACTIV3
IST537I 4 0 BLCKD 1 3 1 ACTIV3
IST537I 4 1 BLCKD 1 3 1 ACTIV3
IST314I END
d net,route,blocked,origin=ISTPUS
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = BLOCKED VIRTUAL ROUTES
IST172I NO BLOCKED VIRTUAL ROUTE
IST314I END
d net,route,held
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = HELD VIRTUAL ROUTES
IST172I NO HELD VIRTUAL ROUTE
IST314I END