Using the information in the Hardware Group Report
With the hardware group capping limit, which can be set in the logical partition controls of the
Hardware Management Console (HMC), another restriction to an LPAR is added. This limit enforces an
absolute capping for each type of processor defined to every partition in the hardware group. Even
when an LPAR is not limited by its weight, its defined capacity, or a group capacity limit, it can
be limited by this hardware group capping value. The minimum of the following limitations is applied
to any partition:
- Defined capacity
- LPAR weights
- Group capacity limit
- Absolute physical hardware capping limit
- Hardware group capping value
The Hardware Group Report displays the settings of the hardware groups and their partitions.
Field Heading | Meaning |
---|---|
HW GROUP NAME | Name of the hardware group. |
PARTITION | Name of the logical partition. |
SYSTEM | Name of the z/OS system. |
HW GROUP LIMIT | Absolute limit on partition usage of all processor types that are
members of the same hardware group, in terms of numbers of CPUs. If the hardware group name or the
limit changed during the reporting interval, an asterisk (* ) is appended. |
Spreadsheet and Overview reference
You can make this report available in a spreadsheet, using the Spreadsheet Reporter. For details,
see z/OS RMF Reporter User's Guide. Table 2 shows the overview condition names for the
Overview report.
Field Heading or Meaning | Overview Name |
---|---|
HW GROUP LIMIT - CP | HGCCP |
HW GROUP LIMIT - IIP | HGCIIP |
HW GROUP LIMIT - ICF | HGCICF |
HW GROUP LIMIT - IFL | HGCIFL |