Depending on which OSA-Express feature is
installed, up to four additional status indicators may be found for
each physical port on the bezel. These indicate PCI bus status.
Table 1. Status indicators - Number of status indicators differs by
OSA-Express Feature (GbE)
Feature
A0/A1
(Green)
FRU
J0/J1
GbE
OFF=No
link/No Activity
OFF=Default
OFF=Default
ON=Link/No Activity
ON=Ready for replace
cable or identifies position
ON=Ready for replace
cable or identifies position
Flashing=Link/Activity
Blinking=Diagnostic
or isolation in progress
Blinking=Diagnostic
or isolation in progress
Table 2. Status indicators
- Number of status indicators differs by OSA-Express Feature (10 GbE)
Feature
ACTLINK
P0 (Green)
FRU
J0/J1
10
GbE
OFF=No
link
OFF=Default
OFF=Default
ON=Link
ON=Ready for replace
cable or identifies position
ON=Ready for replace
cable or identifies position
Flashing=Link
Blinking=Diagnostic
or isolation in progress
Blinking=Diagnostic
or isolation in progress
Table 3. Status indicators
- Number of status indicators differs by OSA-Express Feature (1000BASE-T)