CBR1110IOAM library status:
Explanation
OPTICAL DEVICE ATT USE AVL TOT EMP SCR PT DEV ON
LIBRARY TYPE DRV DRV DRV SLT SLT VOL NUM ST CMD
olibname odevtype aaa bbb ccc ddd eee fff g hhhh i j k lbcmd
TAPE LIB DEVICE TOT ONL AVL TOTAL EMPTY SCRTCH
LIBRARY TYP TYPE DRV DRV DRV SLOTS SLOTS VOLS
tlibname typ tdevtype 1lll mmmm nnnn ooooooo ppppppp qqqqqq
OP IO LIB READcb
COUNT
rdcnt
ON OP
r s
D SMS,LIBRARY(library-name),DETAIL
D SMS,LIBRARY(ALL),DETAIL
F OAM,D,LIB
F OAM,D,LIB,library-name
A
display of OAM library status has been generated. When a library name is supplied, there is one data
line describing the specified library; when ALL is supplied, there is one data line for each library
in the configuration.- In a classic OAM configuration, if both optical and tape libraries have been defined in the SMS configuration, the sample display above is generated. Otherwise, only the data for the library type defined is generated.
- In a multiple OAM configuration, this message is not displayed in an Object OAM address space because the Optical level of the OAM storage hierarchy is not supported in a multiple OAM configuration.
- olibname
- Name of the optical library.
- odevtype
- Name of the library device type, as follows:
- 3995-111
- 3995 rewritable library, extension to 3995-131
- 3995-112
- 3995 write-once library, extension to 3995-132
- 3995-113
- 3995 multifunction library, extension to 3995-133
- 3995-131
- 3995 rewritable library and controller
- 3995-132
- 3995 write-once library and controller
- 3995-133
- 3995 multifunction library and controller
- 3995-C3A
- 3995 multifunction library controller
- 3995-C12
- 3995 multifunction library, extension to 3995-C32
- 3995-C16
- 3995 multifunction library, extension to 3995-C36
- 3995-C18
- 3995 multifunction library, extension to 3995-C38
- 3995-C32
- 3995 multifunction library, attaches to 3995-C3A
- 3995-C34
- 3995 multifunction library, attaches to 3995-C3A
- 3995-C36
- 3995 multifunction library, attaches to 3995-C3A
- 3995-C38
- 3995 multifunction library, attaches to 3995-C3A
- aaa
- The total number of optical drives defined to the optical library.
- bbb
- The number of usable optical drives (online, operational, and not pending offline).
- ccc
- The number of available optical drives (online, operational, not pending offline, and not currently in use).
- ddd
- The total number of storage slots in the optical library.
- eee
- The number of empty storage slots in the optical library.
- fff
- The number of scratch volumes in the optical library.
- g
- The active path to the optical library, as follows:
- P
- Primary
- A
- Alternate
- blank
- Pseudolibrary or 3995 library
- hhhh
- MVS/ESA device number of the active CTC or blank for pseudolibraries.
- i
- Optical library online status, as follows:
- Y
- Online
- N
- Offline
- P
- Pending offline
- j
- Optical library operational status, as follows:
- Y
- Operational
- N
- Not operational
- k
- Optical library input/output station operational status, as follows:
- Y
- Operational
- N
- Not operational
- *
- An error occurred while trying to get the status
- blank
- Library not attached or library has no I/O station
- lbcmd
- For 3995 libraries, REMAP indicates that a REMAP of the library is in progress, RMPND indicates that a REMAP is pending for the library, and AUDIT indicates that a full library audit is being processed. If not REMAP, RMPND, or AUDIT, this field contains the library command most recently sent to this optical library.
- rdcnt
- The number of read requests waiting or in progress for optical volumes that are resident in this optical library.
--------------------------------------------
DEFAULT PSEUDO LIB: def-plib-name
DEFAULT MEDIA TYPE: def-mediatype
XCF MEMBER NAME: member-name
--------------------------------------------
The value of def-plib-name in the data line is the name of the pseudolibrary that will be assigned to any volume that is ejected from this library if that volume does not already have a pseudolibrary associated with it. Def-plib-name is specified on the 3995 Library Define panel in ISMF.
The value of def-mediatype in the data line indicates what media types can be entered into the optical library and what media types can be written to if they already reside in the library. Def-mediatype is specified on the 3995 Library Define panel in ISMF.
The value of member-name in the data line is the XCF member name associated with the instance of OAM where this library is currently online. If the library is not online to any instance of OAM in the OAMplex, this field will contain blanks. If this instance of OAM is not currently part of an OAMplex, this field will contain ‘N/A’.
- tlibname
- The name of the tape library.
- typ
- The tape library type, as follows:
- AL
- Automated tape library dataserver
- ML
- Manual tape library
- VCL
- Peer-to-Peer VTS or Virtualization Engine Composite Library
- VDL
- Peer-to-Peer VTS or Virtualization Engine Distributed Library
- VL
- Virtual tape server
- UNK
- Unable to obtain the tape library type from the hardware
- tdevtype
- For an automated tape library, the tape library device type is displayed as DDDD-MMM where DDDD is the device type of the library and MMM is the model. For a manual tape library MANUAL is displayed.
- llll
- The total number of tape drives, known to the current system, residing in the tape library.
- mmmm
- The number of tape drives, known to the current system and residing in the tape library, that are online.
- nnnn
- The number of tape drives, known to the current system and residing in the tape library, that are online and not allocated.
- ooooooo
- The total number of storage slots in the tape library. For a library that resides in a 3584 tape
library, the storage slot count is associated with a particular logical library. For other tape
libraries, the storage slot count reflects the number of storage slots in the entire physical
library. Also, starting from Release 1.5 of the TS7700, when the TS7700 (with
physical tape attached) is installed in a 3584 tape library (with ALMS), the distributed
library no longer surfaces the physical slot information and instead surfaces virtual slot
information.
For a TS7680, this count displays the number of logical volumes that can be defined to the library.
- ppppppp
- Total number of empty slots in the tape library dataserver. For a TS7680, this count displays the number of logical volumes that can still be defined to the library.
- qqqqqq
- The total number of eligible scratch volumes in the tape library.
- r
- The tape library online status, as follows:
- Y
- Online
- N
- Offline
- P
- Pending offline
- s
- The tape library operational status, as follows:
- Y
- Operational
- N
- Not operational
-------------------------------------------------
MEDIA SCRATCH SCRATCH SCRATCH
TYPE COUNT THRESHOLD CATEGORY
MEDIAxx vvvvvvvv xxxxxx wwww
-------------------------------------------------
LIBRARY ID: libid
CACHE PERCENTAGE USED: xxx
OPERATIONAL STATE:{AUTOMATED | PAUSED | MANUAL MODE}
ERROR CATEGORY SCRATCH COUNT: aeaeae
SCRATCH STACKED VOLUME COUNT: afafaf
PRIVATE STACKED VOLUME COUNT: agagag
CORRUPTED TOKEN VOLUME COUNT: ahahah
HIGH CAPACITY INPUT STATION CAPACITY: tttttt
HIGH CAPACITY OUTPUT STATION CAPACITY: uuuuuu
-------------------------------------------------
status lines
The media type line is repeated for the applicable media types.
The media type, scratch count, scratch threshold, and scratch category lines are displayed only for media that have a threshold value or a scratch count greater than zero.
For a VTS composite or distributed library, the appropriate composite or distributed line will be displayed mapping their association.
The library ID line displays the five-character ID assigned to the library.
The cache percentage used is displayed only for a TS7720 (3957-VEx) distributed library or for a TS7680 (3958-DE2); it indicates what percentage of cache the library has utilized.
The error category will display the total number of scratch volumes that have a software error associated with them. Scratch volumes in this category will still have a use attribute of scratch; however, they are not eligible to be mounted.
The scratch stacked volume count will only be displayed for a virtual tape server (VTS) library; it indicates the number of available physical scratch volumes. For a Peer-to-Peer VTS subsystem, this information can be obtained by displaying the distributed libraries associated with the composite library. This count is suppressed if the library being displayed is a TS7720 (3957-VEx).
The private stacked volume count will only be displayed for a virtual tape server (VTS) library; it indicates the number of physical stacked private volumes. For a Peer-to-Peer VTS subsystem, this information can be obtained by displaying the distributed libraries associated with the composite library. This count is suppressed if the library being displayed is a TS7720 (3957-VEx).
The corrupted token volume count will only be displayed for a Peer-to-Peer virtual tape server (VTS) library and indicates the number of volumes in the corrupted token category. For a Peer-to-Peer VTS subsystem, this information can be obtained by displaying the composite library. For corrective action, contact your hardware service representative.
For a VTS composite library, the operational state that is returned to the host is determined by examining the states of the underlying distributed libraries, with much of the other status (for instance, I/O station-related status) being provided from the designated user interface library. Also, since all of the drives and volumes are defined to and associated with the composite library, the display of a distributed library will show that, from a host perspective, there are no volumes and drives associated with that library. The distributed libraries should be displayed for an accurate picture of the total and empty slot counts (the slot counts associated with the composite library are zero).
The high capacity input and output station lines will only be displayed for an automated tape library dataserver and only if the station has been configured.
- Operation degraded due to unavailable hardware resource.
- Safety enclosure interlock open.
- Vision system not operational.
- Library manager offline.
- Operator intervention required.
- Library manager check 1 condition.
- All storage slots full.
- Out of cleaner volumes.
- Dual write disabled.
- Environmental alert.
- Library manager switchover in progress.
- Copy operations {disabled|degraded}.
- VTS operations degraded.
- Immediate Mode Copy operations deferred.
- Service preparation occurring in distributed library library-name.
- Service preparation occurring.
- All convenience input stations empty.
- All convenience output stations empty.
- All convenience output stations full.
- {Bulk Input/Output | Output} {Configured | Not configured}.
- High capacity output station full.
- {Input | Output} door is open.
- Convenience I/O station installed.
- Convenience I/O station in {Input | Output | Import mode}.
- Convenience I/O station {Empty | Full}.
- Single cell output facility in use for eject.
- Host initiated import in process.
- Host initiated export in process.
- Library initiated single volume import in process.
- Library is out of empty stacked volumes.
- Library has insufficient resources to continue mount processing.
- Library supports import/export.
- Library supports outboard policy management.
- Limited cache free space – warning state.
- Out of cache resources – critical state.
- Forced pause occurred.
- Grid links degraded.
- Library supports logical WORM.
- Copy operations disabled by operator command.
- Synchronous mode copy operations deferred.
- Library enabled for scratch allocation assistance.
- Library supports physical tape
- Cloud object store configured
- Cloud object store instance of volume exists
Source
Object Access Method (OAM)
Routing Code
-
Descriptor Code
5,8,9