EZZ6065I jobname CONN DISPLAY
Message Format:
EZZ6065I jobname CONN DISPLAY
    CONNECTED: time    date                STATUS: conn_status
    CLIENT IDENTIFIER FOR CONN: connid            SECLABEL: seclabel
        CLIENTAUTH USERID: cuser
        HOSTNAME: hostname
        CLNTIP..PORT: ipaddr..port
        DESTIP..PORT: ipaddr..port
        LINKNAME: linkname
    PORT: port QUAL: qualification
      AFFINITY: tcp/ip jobname
      STATUS: portstat portacc ACCESS: connaccess
    PROTOCOL: protocol LOGMODE: logmode    DEVICETYPE: devicetype
        OPTIONS: options    3270E FUNCTIONS: e_functions
                      NEWENV FUNCTIONS: ne_functions
    USERIDS    RESTRICTAPPL: ruser        EXPRESSLOGON: euser
    LUNAME: luname TYPE: termtype conntype    APPL: applname
    MAPPING TYPE:    CONN IDENTIFIER
                                                          OBJECT      ITEM SPECIFIC          OPTIONS
        LUMAP GEN:                       ct clid
                                                                      u object spec_item            map_opts
        APPL LUMAP:                      ct clid
                                                                      object                                   map_opts
        DEFLT APPL:                       ct clid
                                                                     nqobject
        USS TABLE:                        ct clid
                                                                      u object, u object
        INT TABLE:                        ct clid
                                                                       object
        MONGROUP:                      ct clid
                                                                       object
              monitor_data
        PARMS:

    PERSIS      FUNCTION       DIA   SECURITY   TIMERS MISC
    (LMTGCAK)(OATSKTQSWHRT)(DRF)(PCKLECXN2)(IKPSTS)(SMLT)
    -------      ------------              ---    ---------         ------     ----
    persis      function               diag   secure          timers    misc DEFAULT
    persis      function               diag   secure          timers    misc *TGLOBAL
    persis      function               diag   secure          timers    misc *TPARMS
    persis      function               diag   secure          timers    misc TP-CURR
        ct    clid
    persis      function               diag   secure          timers    misc prmgrpname
    persis      function               diag   secure          timers    misc <-FINAL
nn OF nn RECORDS DISPLAYED
PORT: port QUAL: qualification
AFFINITY: tcp/ip jobname
        STATUS: portstat portacc ACCESS: connaccess
          TTLSRULE: ttls_rule
          TTLSENVACTION: ttls_env_action
          TTLSCONNACTION: ttls_conn_action
PROTOCOL: protocol LOGMODE: logmode DEVICETYPE: devicetype
OPTIONS: options 3270E FUNCTIONS: e_functions
NEWENV FUNCTIONS: ne_functions
USERIDS RESTRICTAPPL: ruser EXPRESSLOGON: euser

Explanation

The CONNECTION DETAIL Display command.

jobname is the name of the procedure that is used to start the TN3270 server or the job name identifier of the procedure that is used to start the TN3270 server. If you start the TN3270.TNSRV1 server, the jobname value TNSRV1. If you start the TN3270 server, the jobname value is TN3270.

connid is the connection ID as it is known to TCP/IP.

seclabel is the security label assigned to the TCP/IP connection.

ipaddr..port is the client host or destination IP address and port number.

linkname is the linkname, if any, of the connection.

hostname is the host name of client.

time is the time at which the connection was made.

date is the date on which the connection was made.

port is the port number for the following output lines.

qualification indicates that the profile this connection is using is associated with a qualified port. The port qualification might display as an IP address (IPv4 or IPv6), or as a linkname up to 16 characters or the word NONE to indicate that the port is not defined with a qualifier.

portstat is the Port status and is either ACTIVE or QUIESCED.

portacc is the port access type. The possible values are BASIC, SECURE, or TTLSSECURE.

connaccess is SECURE, IN PROG, NEGTSEC, or NON-SECURE. If the value is SECURE or NEGTSEC and the encryption type was negotiated, a 2-digit encryption type abbreviation follows. If the portacc value is TTLSSECURE, see z/OS Cryptographic Services System SSL Programming for encryption type definitions. If the portacc value is SECURE see EZZ6064I for a list of the possible values. If the access involves SSL or TLS, the type and version follow, for example, TLSV1 or SSLV3. If client authentication was requested, the ClientAuth parameter from either AT-TLS policy or the Telnet definition follows the security type.

ttls_rule is the AT-TLS policy rule that matches this connection.

ttls_grp_action is the AT-TLS policy group action that is defined by the ttls_rule value.

ttls_env_action is the AT-TLS policy environment action that is defined by the ttls_rule value.

ttls_conn_action is the AT-TLS policy connection action that is defined by the ttls_rule value.

protocol is the connection protocol.

logmode is the logmode of the session.

devicetype is the device type that the client specified.

options are the connection options negotiated. See EZZ6064I for details.

ruser is the user ID used at the solicitor panel in response to the Telnet request for user ID/password because of Restrictappl being coded.

cuser is the user ID established from client certificate used during SSL handshake negotiation.

euser is the user ID established from client certificate used during new environment negotiation.

applname is the name of the application in session with the client.

luname is the LU name selected by Telnet to represent the client.

clid is the client identifier used to map the object.

u is a greater than symbol (>), which identifies the LU group that is being used or the USS table that is being used.

object is the object name that is being mapped.

spec_item is an additional item specifically related to the mapping statement. The map_opts Position(1) describes what the item is.

map_opts contain mapping flags. See the description of the map_opts parameter for details.

nqobject is the Network Qualified Object name that is being mapped.

monitor_data is the response time data collected for this connection. See the information on Connection Monitoring mapping statements in the Telnet section of z/OS Communications Server: IP Configuration Guide for details.

persis, function, diag, secure, timers, and misc are connection parameter flags. See EZZ6060I for details.