Displaying the routes in all OMPROUTE IPv4 policy-based routing tables
To display all of the routes in all OMPROUTE policy-based routing tables, enter the following command:
D TCPIP,TCPCS7,OMP,RTTABLE,PR=ALL
EZZ7847I ROUTING TABLE 154
TABLE NAME: SECHIGH
TYPE DEST NET MASK COST AGE NEXT HOP(S)
SBNT 2.0.0.0 FF000000 1 192 NONE
SPIA 2.2.2.0 FFFFFFFC 4 201 9.67.100.8
SPIA 2.2.2.2 FFFFFFFF 4 201 9.67.100.8
SBNT 3.0.0.0 FF000000 1 192 NONE
SPF 3.3.3.0 FFFFFFF0 103 201 9.67.100.8
SPF 3.3.3.3 FFFFFFFF 103 201 9.67.100.8
SBNT 4.0.0.0 FF000000 1 192 NONE
SPF 4.4.4.4 FFFFFFFC 3 201 9.67.100.8
SPF 4.4.4.4 FFFFFFFF 3 201 9.67.100.8
SBNT 7.0.0.0 FF000000 1 192 NONE
STAT* 7.7.77.77 FFFFFFFF 0 203 8.8.88.8
SBNT 8.0.0.0 FF000000 1 192 NONE
SPF 8.8.8.8 FFFFFFFC 2 201 9.67.100.8
SPF 8.8.8.8 FFFFFFFF 2 201 9.67.100.8
SBNT 9.0.0.0 FF000000 1 192 NONE
DIR* 9.67.100.0 FFFFFF00 1 201 9.67.100.7
SPF 9.67.100.8 FFFFFFFF 1 201 9.67.100.8
SPF 9.67.101.3 FFFFFFFF 102 201 9.67.100.8
SPF 9.67.101.4 FFFFFFFF 103 201 9.67.100.8
SPF 9.67.105.4 FFFFFFFF 2 201 9.67.100.8
SPF 9.67.105.8 FFFFFFFF 7 201 9.67.100.8
SPIA 9.67.106.4 FFFFFFFF 4 201 9.67.100.8
SPIA 9.67.107.7 FFFFFFFF 5 201 9.67.100.8
SPIA 9.67.108.2 FFFFFFFF 3 201 9.67.100.8
SBNT 10.0.0.0 FF000000 1 192 NONE
SPE2 10.1.1.0 FFFFFF00 1 201 9.67.100.8
SPE2 10.1.1.1 FFFFFFFF 1 201 9.67.100.8
SPE2 130.200.0.0 FFFF0000 0 192 9.67.100.8
SPE2 130.200.1.1 FFFFFFFF 0 201 9.67.100.8
SPE2 130.200.1.18 FFFFFFFF 0 201 9.67.100.8
SPE2 130.201.0.0 FFFF0000 0 201 9.67.100.8
SPE2 130.202.0.0 FFFF0000 0 201 9.67.100.8
0 NETS DELETED
DYNAMIC ROUTING PARAMETERS
INTERFACE: CTC7TO8 NEXT HOP: ANY
TABLE NAME: SECLOW
TYPE DEST NET MASK COST AGE NEXT HOP(S)
SBNT 2.0.0.0 FF000000 1 192 NONE
SPIA 2.2.2.0 FFFFFFFC 4 201 9.67.102.3
SPIA 2.2.2.2 FFFFFFFF 4 201 9.67.102.3
SBNT 3.0.0.0 FF000000 1 192 NONE
SPF 3.3.3.0 FFFFFFF0 2 201 9.67.102.3
SPF 3.3.3.3 FFFFFFFF 2 201 9.67.102.3
SBNT 4.0.0.0 FF000000 1 192 NONE
SPF 4.4.4.4 FFFFFFFC 3 201 9.67.102.3
SPF 4.4.4.4 FFFFFFFF 3 201 9.67.102.3
SBNT 7.0.0.0 FF000000 1 192 NONE
STAT* 7.7.7.77 FFFFFFFF 0 203 3.3.33.3
SBNT 8.0.0.0 FF000000 1 192 NONE
SPF 8.8.8.8 FFFFFFFC 8 201 9.67.102.3
SPF 8.8.8.8 FFFFFFFF 8 201 9.67.102.3
SBNT 9.0.0.0 FF000000 1 192 NONE
SPF 9.67.101.3 FFFFFFFF 102 201 9.67.102.3
SPF 9.67.101.4 FFFFFFFF 2 201 9.67.102.3
DIR* 9.67.102.0 FFFFFF00 1 201 9.67.102.7
SPF 9.67.102.3 FFFFFFFF 1 201 9.67.102.3
SPF 9.67.105.4 FFFFFFFF 8 201 9.67.102.3
SPF 9.67.105.8 FFFFFFFF 7 201 9.67.102.3
SPIA 9.67.106.4 FFFFFFFF 4 201 9.67.102.3
SPIA 9.67.107.7 FFFFFFFF 5 201 9.67.102.3
SPIA 9.67.108.2 FFFFFFFF 3 201 9.67.102.3
SBNT 10.0.0.0 FF000000 1 192 NONE
SPE2 10.1.1.0 FFFFFF00 1 201 9.67.102.3
SPE2 10.1.1.1 FFFFFFFF 1 201 9.67.102.3
SPE2 130.200.0.0 FFFF0000 0 192 9.67.102.3
SPE2 130.200.1.1 FFFFFFFF 0 201 9.67.102.3
SPE2 130.200.1.18 FFFFFFFF 0 201 9.67.102.3
SPE2 130.201.0.0 FFFF0000 0 201 9.67.102.3
SPE2 130.202.0.0 FFFF0000 0 201 9.67.102.3
0 NETS DELETED
DYNAMIC ROUTING PARAMETERS
INTERFACE: CTC7TO3 NEXT HOP: ANYResult: If a policy-based route table
is configured with no IPv4 dynamic routing parameters, OMPROUTE has
no knowledge of that route table for IPv4. The route table is not
included in this display. If no policy-based route tables are configured
with IPv4 dynamic routing parameters, message EZZ8150I is issued.