Confirming processing requirements
The panel in Figure 1 an example of
what is displayed if you attempt to exit the Modify System Layout
function when problems exist. This panel is tailored to show only
the problems that actually exist, so any actual panel displayed would
likely show fewer problems. The panel shown in Figure 1 would be displayed only if you attempted
to exit Modify System Layout when all of the following situations
existed:
- At least one physical volume has an invalid device number. The default device number is set to CCUU. You must change each CCUU to a valid hexadecimal device number.
- Problems were encountered with physical volumes.
- SMS is not active on the driving system.
Figure 1. Panel:
Confirm processing requirements
CPPP6058 --------------------------------------------------------------------
COMMAND ==>
*****************************************************************************
***** Warning! *****
***** Configuration Problem Found *****
***** *****
***** Press ENTER to return to Modify System Layout. *****
***** Press END or RETURN to save the current values and exit. *****
***** *****
*****************************************************************************
Problem Type What to do:
--------------------------- -------------------------------------------------
Physical Volume See Physical Volume Summary Display for more info
SMS Subsystem NOT active Activate SMS subsystem
To continue working with the configuration, press the ENTER key and correct the problems identified on the panel.
To exit the panel, press the END key. Your subsequent work with the dialog resumes at the Modify System Layout function.