- MAXIMUM_EDIT_PROFILES
- The maximum number of ISPF Edit profiles. If the number of profiles
exceeds this number the least recently used unlocked profile is deleted
from the profile table. The value must be between 1 and 255.
The default is 25.
- SCLM_WARNING_LEVEL
- Indicates the level of SCLM checking that should be done when
SCLM-controlled members are processed outside SCLM. Valid values are:
- NONE
- No checking is done. SCLM-controlled members may be edited and processed outside SCLM.
- WARN
- If an SCLM-controlled member is processed by Edit or Reset Statistics, a message is displayed to warn the user that the SCLM accounting data will be invalidated by the pending request.
- ERROR
- When Edit of an SCLM member is attempted, an error message is displayed and the edit is denied.
The default is WARN.
- UNDO_STORAGE_SIZE
- The maximum amount of kilobytes of storage available to the edit
UNDO command to be used for keeping a history of edit changes. A minimum
value of 1024 (1024 KB) is recommended. If this value is 0 then UNDO
will be available from the edit recovery data set only. If the field
is not 0 but is less that 128, a value of 128 will be used. This value
will be rounded down to the nearest multiple of 64 (64 KB).
The default is 0.
Note: Use of storage for saving the record of changes provides better response time for individual users, but may have a slight detrimental effect on overall system performance. - ALLOW_EDIT_HIGHLIGHTING
- Should ISPF Edit highlighting be available to all users and applications.
Valid values are YES or NO. A value of NO disables Edit highlighting
for all applications, a value of YES enables Edit highlighting for
any dialog that uses a panel enabled for highlighting.
The default is YES.
- DEFAULT_EDIT_DISPLAY
- This field determines how the editor appears when it is invoked
via ISPF either interactively, or via an Edit service call that does
not specify a user edit panel. It controls the availability of action
bars and edit highlighting. Valid values are:
- 0
- No actions bars should be displayed, and Edit highlighting should not be available.
- 1
- Actions bars should be displayed, but Edit highlighting should not be available.
- 2
- No actions bars should be displayed, but Edit highlighting should be available.
- 3
- Actions bars should be displayed, and Edit highlighting should be available.
The default is 3.
- MAXIMUM_STORAGE_ALLOWED_FOR_EDIT
- The maximum number of kilobytes of storage that the editor can
use when initially reading in data. If the initial read of the data
requires more storage than this value, browse will be substituted
instead. To allow edit to use as much storage as is available, set
the value to 0.
The default is 0.
- ENABLE_ASSEMBLER_CONTINUATION_ERRORS
- Enable the use of reverse video pink to highlight Assembler continuations
which start before column 16. Set this value to NO if your site uses
a different start column for Assembler continuation (via the ICTL
Assembler instruction) or if assembler highlighting is used for data
other than Assembler programs (such as SCLM architecture definitions).
The default is YES.
- WARN_ON_TRUNCATION_OF_TRAILING_BLANKS
- Should a warning message be displayed if a user edits variable
data (record format = V) with one or more records that ends in a blank.
The editor will truncate these blanks when the edit data is saved
unless the editor is told to preserve the blanks.
Blanks will be preserved if:
- The "Preserve VB record length" field on the Edit Entry panel is selected.
- The PRESERVE keyword is specified on the EDIT service invocation.
- The PRESERVE ON Edit command is entered.
The default is YES.
- SITE_WIDE_INITIAL_MACRO
- Site-wide Edit initial macro. The macro specified here will be
run before any user-specified macros. This can allow you to alter
or disallow edit sessions. You may want to use a macro that does a
PROFILE RESET to force all new profiles to use the settings in this
configuration table.
The default is NONE (no macro).
- TEXT_FLOW_TERMINATORS
- What characters should cause the edit text flow function (line
command TF, edit macro command TFLOW) to stop processing. These characters
generally indicate a new paragraph or section of a document. The default characters are:
.:&< - EDIT_CUT_DEFAULT
- Valid values are REPLACE and APPEND. Selecting REPLACE means that
the cut information replaces whatever information is already in the
clipboard. Selecting APPEND means that cut information is added at
the end of existing information in the clipboard.
The default is REPLACE.
- EDIT_PASTE_DEFAULT
- Valid values are KEEP and DELETE. Selecting KEEP means that the
information remains in the clipboard even after pasting it into a
separate file. Selecting DELETE means that the information is deleted
from the clipboard after it has been pasted into a separate file.
The default is KEEP.
- ALLOW_DATA_SET_CREATION_FOR_CREATE_REPLACE
- If the target data set for the Edit CREATE or REPLACE command
does not exist, should the data set be created for the user. The user
can specify either that the data set be created with the same characteristics
as the original, or can specify the characteristics for the new data
set. Valid values are YES and NO.
The default is YES.
- FORCE_ISRE776_FOR_RCHANGE
- Ensures that when RCHANGE is issued from a PF key, it does not
try to process input from the command line. In this case RCHANGE will
treat anything that you type on the command line as an invalid parameter
and will return an error message ISRE776.
This keyword sets a site default for the EDITSET option "Force ISRE776 if RCHANGE passed arguments". Valid values are YES and NO.
The default is NO.
- FORCE_PRESERVE_VB_RECORD_LENGTH
- Forces the users' Preserve VB Record Length setting in Edit to
be the value selected in the PRESERVE_VB_RECORD_LENGTH field. Valid
values are YES and NO.
The default is NO.
- PRESERVE_VB_RECORD_LENGTH
- The Preserve VB Record Length option in Edit will be selected.
This option will cause the editor to save trailing blanks for variable-length
files. Valid values are YES and NO.
The default is NO.
- MAXIMUM_NUMBER_OF_EDIT_CLIPBOARDS
- The maximum number of Edit clipboards allowed. Edit clipboards
are used by the Edit CUT and PASTE commands and are kept in data spaces
that last the life of the TSO session. Data spaces are allocated by
the CUT command and released by the PASTE command, and are paged out
when not in use. This can be a number between 1 and 11.
The default is 11.
- MAXIMUM_EDIT_CLIPBOARD_SIZE
- The maximum size for the Edit clipboards, in 4K increments. A
value of 1 would mean 4 kilobytes. A value of 0 indicates that the IBM® default data space size (239
4K blocks) of the value set through IEFUSI should be used.
The default is 0.
- VSAM_EDIT_ENABLED
- Is editing of VSAM data set enabled on the system. ISPF Edit will
invoke the command in the VSAM_EDIT_COMMAND field for any VSAM data
sets specified unless restricted (see VSAM_RESTRICTED_EDIT_DATASET).
Valid values are YES and NO.
The default is NO.
- VSAM_EDIT_COMMAND
- The command to be invoked when a VSAM data set is specified to
ISPF Edit. A slash (/) may be used to specify the data set name specified.
The maximum length is 50 characters.
The default is FMNINV DSE /
- VSAM_EDIT_LIMITED.
- Should users be restricted from editing certain VSAM data sets?
If this field is set to YES, the VSAM_RESTRICTED_EDIT_DATASET field
must be used to specify the restricted data sets. Valid values are
YES and NO.
The default is NO.
- VSAM_BROWSE_ENABLED
- Is browsing of VSAM data set enabled on the system. ISPF Browse
will invoke the command in the VSAM_BROWSE_COMMAND field for any VSAM
data sets specified unless restricted (see VSAM_RESTRICTED_BROWSE_DATASET).
Valid values are YES and NO.
The default is NO.
- VSAM_BROWSE_COMMAND
- The command to be invoked when a VSAM data set is specified to
ISPF Browse. A slash (/) may be used to specify the data set name
specified. The maximum length is 50 characters.
The default is FMNINV DSB /
- VSAM_VIEW_ENABLED
- Is viewing of VSAM data set enabled on the system. ISPF View will
invoke the command in the VSAM_VIEW_COMMAND field for any VSAM data
sets specified unless restricted (see VSAM_RESTRICTED_VIEW_DATASET).
Valid values are YES and NO.
The default is NO.
- VSAM_VIEW_COMMAND
- The command to be invoked when a VSAM data set is specified to
ISPF View. A slash (/) may be used to specify the data set name specified.
The maximum length is 50 characters.
The default is FMNINV DSV /
GLOBAL_LINE_COMMAND_TABLE
- Defines the line command table that is active when a line command
table is not otherwise specified by the user or supplied as a parameter
on the EDIF, EDIT, VIEW or VIIF service call.
- GLOBAL_DISABLE_PACK
- Disables the PACK operation used by the editor. Any currently
packed data will be unpacked if saved. This option also disables the
PACK operation from having any effect with COPY and MOVE services.