.-MPCLEVEL--=--HPDT-------.
>>-+-------------------------+---------------------------------><
'-MCPLEVEL--=--+-HPDT---+-'
+-NOHPDT-+
'-QDIO---'
statements: |
TRLE |
dependencies: |
HPR start option, MAXREADS, PACKING,
STORAGE |
Specifies the level of MPC capability to be used for the
connection. See
z/OS Communications Server: SNA Network Implementation
Guide for information about the different levels
of MPC capability provided by VTAM®.
- MPCLEVEL=HPDT
- Indicates that HPDT MPC is
to be used for the connection. This operand is required for native
ATM connections.
Note: For connections to an adjacent APPN node
or an Open Systems Adapter port: When MPCLEVEL=HPDT, you must
code HPR=RTP in the start list for this VTAM.
This restriction does not apply if this MPC connection is only for
IP traffic.
- MPCLEVEL=NOHPDT
- Indicates that non-HPDT MPC is to be used for the connection.
If MPCLEVEL=NOHPDT is specified and a value is coded for the MAXREADS,
PACKING, or STORAGE operand, the values specified for MAXREADS, PACKING,
or STORAGE are ignored.
- MPCLEVEL=QDIO
- Indicates that the Queued Direct I/O interface is used for an OSA-Express feature.
Control data is transmitted across the one READ and one WRITE device.
Normal data is transmitted across a DATAPATH device, where each ULP
is assigned its own device number for normal data when the device
or interface is started, and a device number for trace data when the
OSA-Express network traffic analyzer (OSAENTA) trace is started. When
the MPCLEVEL value is QDIO, HPDT MPC is also used for this connection
across the control channels. When you code MPCLEVEL=NOHPDT, the PACKING
and STORAGE operands are ignored. The MAXREADS value is forced to
2 and should not be coded.