PU

Read syntax diagramSkip visual syntax diagram
>>-name--PU--+-------------------------------+------------------>
             '-ADDR--=--link_station_address-'   

   .-ANS--=--STOP---------.  .-AUTHLEN--=--YES-----.   
>--+----------------------+--+---------------------+------------>
   |         .-STOP-----. |  '-AUTHLEN--=--+-NO--+-'   
   '-ANS--=--+----------+-'                '-YES-'     
             '-CONTINUE-'                              

   .-CAPACITY--=--4M-------------.   
>--+-----------------------------+------------------------------>
   '-CAPACITY--=--number_of_bits-'   

     .-CONNTYPE--=--value_of_conntype_start_option-----.     
>--+-+-------------------------------------------------+-+------>
   | |              .-value_of_conntype_start_option-. | |   
   | '-CONNTYPE--=--+--------------------------------+-' |   
   |                +-APPN---------------------------+   |   
   |                '-LEN----------------------------'   |   
   | .-CONNTYPE--=--APPN-. (1)                           |   
   '-+-------------------+-------------------------------'   
     '-CONNTYPE--=--APPN-'                                   

   .-COSTBYTE--=--0-------------.   
>--+----------------------------+------------------------------->
   '-COSTBYTE--=--cost_per_byte-'   

   .-COSTTIME--=--0------------------.   
>--+---------------------------------+-------------------------->
   '-COSTTIME--=--cost_per_unit_time-'   

                                         (3)     
   .-CPCP--=--value_of_cpcp_start_option-----.   
   |              (2)                        |   
   +-CPCP--=--YES----------------------------+   
>--+-----------------------------------------+------------------>
   |          .-value_of_cpcp_start_option-. |   
   |          +-YES------------------------+ |   
   '-CPCP--=--+----------------------------+-'   
              +-NO-------------------------+     
              '-YES------------------------'     

>--+-------------------------------+---------------------------->
   '-CPNAME--=--control_point_name-'   

   .-DATMODE--=--HALF-----.   
>--+----------------------+------------------------------------->
   |             .-HALF-. |   
   '-DATMODE--=--+------+-'   
                 '-FULL-'     

   .-DISCNT--=--(--NO--)--------------.                         
>--+----------------------------------+--+------------------+--->
   |            .-(--NO--)----------. |  '-DLCI--=--address-'   
   '-DISCNT--=--+-| DISCNT values |-+-'                         

     .-DYNADJCP--=--value_of_dynadjcp_start_option-----.     
>--+-+-------------------------------------------------+-+------>
   | |              .-value_of_dynadjcp_start_option-. | |   
   | '-DYNADJCP--=--+--------------------------------+-' |   
   |                +-NO-----------------------------+   |   
   |                '-YES----------------------------'   |   
   | .-DYNADJCP--=--YES-. (4)                            |   
   '-+------------------+--------------------------------'   
     '-DYNADJCP--=--YES-'                                    

     .-DYNLU--=--value_of_dynlu_start_option-----.     
>--+-+-------------------------------------------+-+------------>
   | |           .-value_of_dynlu_start_option-. | |   
   | '-DYNLU--=--+-----------------------------+-' |   
   |             +-NO--------------------------+   |   
   |             '-YES-------------------------'   |   
   | .-DYNLU--=--YES-.                             |   
   '-+---------------+-----------------------------'   
     '-DYNLU--=--YES-'                                 

   .-ENCR--=--NONE-----.  .-ENCRTYPE--=--DES----.   
>--+-------------------+--+---------------------+--------------->
   |          .-NONE-. |  '-ENCRTYPE--=--TDES24-'   
   '-ENCR--=--+------+-'                            
              +-OPT--+                              
              +-REQD-+                              
              '-SEL--'                              

                                                   (5)     
   .-GP3174--=--NO----------------.  .-HPR--=--YES-----.   
>--+------------------------------+--+-----------------+-------->
   |            .-NO------------. |  '-HPR--=--+-NO--+-'   
   '-GP3174--=--+---------------+-'            '-YES-'     
                '-group_address-'                          

   .-INCLUD0E--=--NO------.  .-INNPORT--=--NO------.   
>--+----------------------+--+---------------------+------------>
   '-INCLUD0E--=--+-NO--+-'  |             .-NO--. |   
                  '-YES-'    '-INNPORT--=--+-----+-'   
                                           '-YES-'     

   .-ISTATUS--=--ACTIVE-------.    .-LIMRES--=--NO------.     
>--+--------------------------+--+-+--------------------+-+----->
   |             .-ACTIVE---. |  | |            .-NO--. | |   
   '-ISTATUS--=--+----------+-'  | '-LIMRES--=--+-----+-' |   
                 '-INACTIVE-'    |              '-YES-'   |   
                                 | .-LIMRES--=--NO-. (6)  |   
                                 '-+---------------+------'   
                                   '-LIMRES--=--NO-'          

   .-LLERP--=--NOTPREF------.       
   +-LLERP--=--REQUIRED-----+ (7)   
>--+------------------------+----------------------------------->
   '-LLERP--=--+-REQUIRED-+-'       
               '-NOTPREF--'         

>--+---------------------------------------------------------------+-->
   '-LMODADR--=--+-seg1_loc_mod_addr-----------------------------+-'   
                 '-(--seg1_loc_mod_addr--,--seg2_loc_mod_addr--)-'     

   .-LPDA--=--ALLOW-----.                                  
>--+--------------------+--+---------------------------+-------->
   |          .-ALLOW-. |  '-LUGROUP--=--lu_group_name-'   
   '-LPDA--=--+-------+-'                                  
              '-BLOCK-'                                    

>--+----------------------------+--+--------------------+------->
   '-LUSEED--=--lu_pattern_name-'  '-NATIVE--=--+-NO--+-'   
                                                '-YES-'     

>--+---------------------------+--+----------------+------------>
   +-NETID--=--(network_id)----+  '-NN--=--+-NO--+-'   
   |                       (8) |           '-YES-'     
   '-NETID--=--(,NOXNETLS)-----'                       

>--+------------------------------------+----------------------->
   '-OWNER--=--+-owner_name-----------+-'   
               '-(----owner_name----)-'     

   .-PDELAY--=--TERRESTR-----.                         
   |                     (9) |                         
   +-PDELAY--=--NEGLIGIB-----+                         
>--+-------------------------+--+------------------+------------>
   |            .-TERRESTR-. |  '-PUDR--=--+-NO--+-'   
   '-PDELAY--=--+----------+-'             '-YES-'     
                +-LONG-----+                           
                +-NEGLIGIB-+                           
                '-PACKET---'                           

   .-PUTYPE--=--5-----.   
>--+------------------+----------------------------------------->
   |            .-5-. |   
   '-PUTYPE--=--+---+-'   
                +-1-+     
                +-2-+     
                '-4-'     

>--+------------------------------------------------------------+-->
   '-RETRIES--=--(--,--pause_interval--,--maximum_retries--,--)-'   

   .-SECNET--=--NO------.  .-SECURITY--=--UNSECURE-----.   
>--+--------------------+--+---------------------------+-------->
   |            .-NO--. |  |              .-UNSECURE-. |   
   '-SECNET--=--+-----+-'  '-SECURITY--=--+----------+-'   
                '-YES-'                   +-PUBLIC---+     
                                          +-UNDERGRO-+     
                                          +-SECURE---+     
                                          +-GUARDED--+     
                                          +-ENCRYPT--+     
                                          '-SHIELDED-'     

                                        (11)          
                          .-TGN--=--ANY-----------.   
                          |           (10)        |   
                          +-TGN--=--1-------------+   
>--+-------------------+--+-----------------------+------------->
   '-SEGMENT--=--+-1-+-'  |         .-ANY-------. |   
                 '-2-'    |         +-1---------+ |   
                          '-TGN--=--+-----------+-'   
                                    '-tg_number-'     

>--+------------------+--+------------------+------------------->
   '-TGP--=--tgp_name-'  '-TOPO--=--CONNECT-'   

   .-UPARM1--=--128------------------------.   
>--+---------------------------------------+-------------------->
   '-UPARM1--=--user-defined_operand_value-'   

   .-UPARM2--=--128------------------------.   
>--+---------------------------------------+-------------------->
   '-UPARM2--=--user-defined_operand_value-'   

   .-UPARM3--=--128------------------------.   
>--+---------------------------------------+-------------------->
   '-UPARM3--=--user-defined_operand_value-'   

     .-VERALSID--=--NO------.    .-XID--=--NO------.   
>--+-+----------------------+-+--+-----------------+------------>
   | |              .-NO--. | |  |         .-NO--. |   
   | '-VERALSID--=--+-----+-' |  '-XID--=--+-----+-'   
   |                '-YES-'   |            '-YES-'     
   | .-VERALSID--=--NO-. (12) |                        
   '-+-----------------+------'                        
     '-VERALSID--=--NO-'                               

   .-XNETALS--=--value_of_XNETALS_start_option-.   
>--+-------------------------------------------+---------------><
   '-XNETALS--=--+-NO--+-----------------------'   
                 '-YES-'                           

DISCNT values

           .-,--F--.      
|--(--YES--+-------+--)-----------------------------------------|
           '-,--NF-'      

Notes:
  1. CONNTYPE=APPN is the only valid value if the TRLE operand is coded.
  2. CPCP defaults to YES for the model RTP PU.
  3. CPCP defaults to the value of the CPCP start options for all PUs except the model RTP PU.
  4. DYNADJCP=YES is the only valid value if the TRLE operand is coded.
  5. HPR defaults to NO when the HPR start option is set to NONE, (RTP,NONE), or (ANR,NONE).
  6. LIMRES=NO is the only valid value if the TRLE operand is coded.
  7. For type 2.1, the default is LLERP=REQUIRED. For SDLC, X.25, and channels links, the default is required. Otherwise, the default is LLERP=NOTPREF.
  8. NOXNETLS applies only to the PU definition statement.
  9. NEGLIGIB is the default if the TRLE operand is coded.
  10. TGN defaults to 1 for subarea.
  11. TGN defaults to ANY for APPN.
  12. VERALSID=NO is the only valid value if the TRLE operand is coded.