.-MULTGSUP--=--YES-----.
>>-+----------------------+------------------------------------><
'-MULTGSUP--=--+-----+-'
+-YES-+
'-NO--'
statements: |
PU (subarea node) |
dependencies: |
none |
Specifies whether multiple-link TGs are supported on this
connection. MULTGSUP=YES are for most configurations.
- MULTGSUP=YES
- Specifies the XIDs received from the connecting node must have
the XID2 Multiple-link TG support bit turned ON, meaning Multiple-link
TGs are supported. In addition, VR TG sequence number checking on
inbound PIUs will be performed. MULTGSUP=YES is the default.
- MULTGSUP=NO
- Specifies that the XIDs received from the connecting node will
be allowed to have the XID2 Multiple-link TG support bit OFF,
meaning Multiple-link TGs are not supported. In addition, VR TG sequence
number checking on inbound PIUs will not be performed.
Note: If not coded correctly, Subarea XCA connections could
fail at activation. This parameter is introduced to support Subarea
XCA connections which traverse mediums that do not support Multiple-link
TGs. The specific configuration which required this parameter follows:
VTAM A/OSA ===tkr=== 2210 ---X.25 PSDN--- NPSI/NCP === VTAM B
In
this case, the NPSI/NCP X.25 connection does not support Multiple-link
TGs.