PUTYPE


     .-PUTYPE--=--2-----.     
>>-+-+------------------+-+------------------------------------><
   | |            .-2-. | |   
   | '-PUTYPE--=--+---+-' |   
   |              '-1-'   |   
   | .-PUTYPE--=--2-. (1) |   
   '-+--------------+-----'   
     '-PUTYPE--=--2-'

Notes:

PUTYPE=2 is the only valid value if the TRLE operand is coded.

statements:

dependencies:

none

Specifies the physical unit type. The physical unit type depends on the type of cluster controller (such as 3767, 3174, or AS/400® ). To determine the physical unit type for a given device, see the component description manual for that device.

Note: If the TRLE operand is coded, PUTYPE must be specified as 2 or allowed to default. See TRLE for more information.

For a type 2.1 physical unit, code PUTYPE=2.

The physical unit type for a LAN switched station must be 2.

For PU types 1 and 2, or type 2.1, the value of PUTYPE occupies bits 4–7 of the 48-bit station ID constructed by VTAM® for switched network operation. For a description of the station ID, see IDNUM.