* MODULE NAME: ISTMSFLD
* GDE: MESSAGE FLOODING TABLE
* DOC: TABLE OF MESSAGES THAT ARE CANDIDATES FOR SUPPPRESSION.
*
*
* Copyright: Licensed Materials - Property of IBM
*
* "Restricted Materials of IBM"
*
* 5650-ZOS
*
* Copyright IBM Corp. 1992, 2013
*
*
* Status: CSV2R1
*
*
* TABLE FOR ACF/VTAM PRE-DESIGNATED SUPPRESSION CANDIDATES
*
* NOTE: INTERNAL TABLE IS ISTMSFLI
*
* $MAC(ISTMSFLD),COMP(MSGS),PROD(VTAM): EXTERNAL MESSAGE FLOOD TABLE
*
* FLAG REASON RELEASE DATE ORIGIN FLAG DESCRIPTORS
* ---- -------- ------- ------ ------ ----------------------------
* $I0= FIF@@MST DPSITEM 920623 450767: External Flood Table Support
* $U2= P108126 DPSITEM 930325 226987: Flood Table Enhancements
* $U3= FIFDR004 DPSITEM 920430 226987: Update for defaults
* $T1= P104816 HATAPPN 921012 591683: Add NQN replacement messages
* $04= OY57097 SNAIP 930323 324086: New message IST1386I
* $H1= VS@@@MST VSE/ESA 931110 544872: New message IST1000I
* $U4= P112611 SNA/IP2 940314 139890: Add message IST1388I
* $L1= KFRDR019 FREEDOM 950329 699466: Implement VTA09960752
* $Y1= P118721 FREEDOM 950419 699466: Correct M664 link
*
* Flag Reason Release Date Origin Description
* ---- -------- -------- ------ -------- ------------------------
* $F1= P127165 CSV2R6 980226 MCGEACHY: Add some HPR/UDP messages
* $A1= OW30833 CSV2R7 980518 N$TTLA : Add message IST1693I
* $A2= OW26575 CSV2R7 980517 N$TTLA : Add message IST520I
* $G1= P127943 CSV2R7 980918 JPERKINS: Correct the integration of
* OW30833 and OW27575
* $L2= R12CNN CSV1R2 000706 GXM : CNN Routing Failure Msg
* $N1= R14CSALM CSV1R4 010716 NMCAREY : CSALIMIT Enhancement
* $A3= OW55284 CSV1R5 020715 KUNKEL : Add message IST1762I
* $Q1= R16EEVRN CSV1R5 020715 RKunkel : Multiple VRNs for EE
* $Q2= D131648 R16BASE 021018 RKunkel : Same VRN name allowed for
* Local and GLobal
* $Q3= D132176 R16EEIP6 030205 PatBrown: Add message IST1890I
* $Q4= D132467 R16EEMGT 030408 VANZIMM : Add messages for
* SNAMGMT Server subtask
* $R1= X16RTPRC CSV1R6 030709 Zebrow : Stalled HPR Pipe Recovry
* $E1= RASNANLP CSV1R10 070628 RKunkel : Path MTU Discovery for EE
* $A4= OA09256 ZCSV2R7 050111 JPERKINS: Add IST1806I/IST1807I
* $A5= OA10450 ZCSV2R7 050315 JPERKINS: Add IST1903I
* $A6= OA10637 ZCSV2R7 050315 JPERKINS: Add IST1136I/IST1416I
* $A7= OA14845 HVT6170 060122 Kunkel : Add IST2187I
* $ = OA21989 CSV1R9 070727 YOUNGCAE: Replace missing messages
* added by change flags
* $A4, $A5, $A6, and $A7
* $E2= D143522 RASNANLP 080131 Kunkel : Modify IST2245I-IST2247I
* $F2= D147322 RBBASE 090318 youngcae: Remove retired messages
* (Deletes only)
* $H2= RCSNAEEH CSV1R12 091118 harishs : EE Health verification
* $A8= OA31829 HVT6190 100216 youngcae: Add IST2058I
* $V1= REFINAPV CSV2R1 111109 HARISHS : Add IST2364I
* (FIN APAR OA37787)
*******************************************************************
ISTMSFLD FLDTAB
*/*********************************************************
*/* IST017I *
*/* UNABLE TO LOAD PHASE % *
*/*********************************************************
M017 FLDENT MESSAGE=0017, MESSAGE IST017I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES), PHASE NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST118I *
*/* ANOMALY FOUND NEAR RECORD % IN MEMBER % - CODE % *
*/*********************************************************
M118 FLDENT MESSAGE=0118, MESSAGE IST118I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(NO, COUNT X
YES, MEMBER NAME X
YES), CODE X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST154I *
*/* EXPANSION FAILED FOR % BUFFER POOL - CODE %, *
*/* USERID = % *
*/*********************************************************
M154 FLDENT MESSAGE=0154, MESSAGE IST154I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, BUFFER POOL X
YES, CODE X
YES), USERID X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST182I *
*/* UNABLE TO GET STORAGE FOR CKPT % MAJOR NODE % *
*/*********************************************************
M182 FLDENT MESSAGE=0182, MESSAGE IST182I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, DATASET NAME X
YES), NODE NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST192I *
*/* POA MSG TRANSFER FAILED - INSUFFICIENT STORAGE *
*/*********************************************************
M192 FLDENT MESSAGE=0192, MESSAGE IST192I X
TIME=, DEFAULT TO 30 SECONDS X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST208I *
*/* UNABLE TO TERMINATE SESSIONS FOR ID = % - *
*/* INSUFFICIENT STORAGE *
*/*********************************************************
M208 FLDENT MESSAGE=0208, MESSAGE IST208I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=YES, MINOR NODE X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST234I *
*/* I/O ERROR % *
*/*********************************************************
M234 FLDENT MESSAGE=0234, MESSAGE IST234I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=YES, ONE TEXT FIELD X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST301I *
*/* INSUFFICIENT VFBUF STORAGE FOR I/O TRACE TABLE *
*/*********************************************************
M301 FLDENT MESSAGE=0301, MESSAGE IST301I X
TIME=, DEFAULT TO 30 SECONDS X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST348I *
*/* UNABLE TO PROCESS DISCONNECTION FOR PU = % *
*/* DUE TO LACK OF STORAGE *
*/*********************************************************
M348 FLDENT MESSAGE=0348, MESSAGE IST348I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES), PUNAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST366I *
*/* CONFIG % UNABLE TO DEFINE % - MAXIMUM NUMBER OF *
*/* NETWORK ADDRESSES FOR HOST SUBAREA EXCEEDED *
*/*********************************************************
M366 FLDENT MESSAGE=0366, MESSAGE IST366I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, CONFIG NAME X
NO), NODE NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST367I *
*/* NO STORAGE TO DEFINE NODE % CONFIG % *
*/*********************************************************
M367 FLDENT MESSAGE=0367, MESSAGE IST367I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(NO, NODE NAME X
YES), CONFIG NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST380I *
*/* ERROR FOR ID = % - REQUEST: %, SENSE % *
*/*********************************************************
M380 FLDENT MESSAGE=0380, MESSAGE IST380I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(NO, NODE NAME X
YES, RU NAME X
YES), SENSE CODE X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST436I *
*/* STORAGE NOT AVAILABE FOR TUNING STATISTICS DATA *
*/*********************************************************
M436 FLDENT MESSAGE=0436, MESSAGE IST436I X
TIME=, DEFAULT TO 30 SECONDS X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST520I *
*/* UNABLE TO PROCESS % *
*/*********************************************************
M520 FLDENT MESSAGE=0520, MESSAGE IST520I @A2AX
TIME=, DEFAULT 30 SECONDS @A2AX
VARTEXT=(YES), REQUEST @A2AX
LIST=1694, LINK TO IST1694I @A2AX
HARDCOPY= DEFAULT TO YES @A2A
*/*********************************************************
*/* IST522I *
*/* % % % SA % TO SA % % *
*/*********************************************************
M522 FLDENT MESSAGE=0522, MESSAGE IST522I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, ER/VR NUMBER X
YES, OPTION X
YES, FAILED/REJECTED X
YES, SA1 X
YES, SA2 X
YES), FOR TPi X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST526I *
*/* ROUTE FAILED FROM % TO % - DSA % - NETID % *
*/*********************************************************
M526 FLDENT MESSAGE=0526, MESSAGE IST526I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, SUBAREA1 X
YES, SUBAREA2 X
YES, DESTSUBAREA X
YES), NETID X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST561I *
*/* STORAGE UNAVAILABLE: % BUFFER POOL *
*/*********************************************************
M561 FLDENT MESSAGE=0561, MESSAGE IST561I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES), BUFFER POOL X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST562I *
*/* STORAGE UNAVAILABLE: % REACHED *
*/*********************************************************
M562 FLDENT MESSAGE=0562, MESSAGE IST562I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES), CSA TYPE X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST563I *
*/* STORAGE UNAVAILABLE: MAXPVT REACHED FOR % % *
*/*********************************************************
M563 FLDENT MESSAGE=0563, MESSAGE IST563I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, JOB NAME X
YES), STEPNAME|USERID X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST564I *
*/* STORAGE UNAVAILABLE: COMMON AREA SUBPOOL % *
*/*********************************************************
M564 FLDENT MESSAGE=0564, MESSAGE IST564I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES), SUBPOOL X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST565I *
*/* STORAGE UNAVAILABLE: VTAM PRIVATE AREA SUBPOOL % *
*/*********************************************************
M565 FLDENT MESSAGE=0565, MESSAGE IST565I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES), SUBPOOL X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST566I *
*/* STORAGE UNAVAILABLE: % % SUBPOOL % *
*/*********************************************************
M566 FLDENT MESSAGE=0566, MESSAGE IST566I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, JOB NAME X
YES, STEPNAME|USERID X
YES), SUBPOOL NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST663I *
*/* % REQUEST %, SENSE = % *
*/*********************************************************
M663 FLDENT MESSAGE=0663, MESSAGE IST663I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, REQUEST X
YES, ADJNODE NAME - RESULTS X
YES), SENSE X
LIST=664, LINK TO IST664I @Y1CX
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST664I *
*/* % %=% % %=% *
*/*********************************************************
M664 FLDENT MESSAGE=0664, MESSAGE IST664I @L1AX
VARTEXT=(YES, REAL/ALIAS @L1AX
YES, OLU/PLU @L1AX
YES, NAME @L1AX
YES, REAL/ALIAS @L1AX
YES, SLU/DLU @L1AX
YES) NAME @L1A
*/*********************************************************
*/* IST678I *
*/* INSUFFICIENT STORAGE TO SCHEDULE TPEND EXIT *
*/* FOR % *
*/*********************************************************
M678 FLDENT MESSAGE=0678, MESSAGE IST678I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES), APPL NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST820I *
*/* % RSP DATA DISCARDED FOR ID = % - INSUFF STORAGE *
*/*********************************************************
M820 FLDENT MESSAGE=0820, MESSAGE IST820I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, 'ACTLU'|'ACTPU' X
YES), NODE NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST822I *
*/* CRRM % RECOVERY FAILED - INSUFFICIENT STORAGE *
*/*********************************************************
M822 FLDENT MESSAGE=0822, MESSAGE IST822I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES), CDRM NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST860I *
*/* DEACTIVATION OF % INCOMPLETE - INSUFFICIENT *
*/* STORAGE *
*/*********************************************************
M860 FLDENT MESSAGE=0860, MESSAGE IST860I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES), NODE NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST930I *
*/* % - % SESSION USING % OF %BUF *
*/*********************************************************
M930 FLDENT MESSAGE=0930, MESSAGE IST930I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, NODENAME1 X
YES, NODENAME2 X
YES, PERCENTAGE X
YES), POOL X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST932E *
*/* FAILURE OCCURRED DURING TAKEOVER OF %, SENSE=% *
*/*********************************************************
M932 FLDENT MESSAGE=0932, MESSAGE IST932E X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, LUNAME X
YES), SENSE CODE X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST970I *
*/* LU - LU VERIFICATION ERROR % FOR % *
*/*********************************************************
M970 FLDENT MESSAGE=0970, MESSAGE IST970I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, CODE X
YES), PROFILE NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST976I *
*/* ENTRY % DEFINED BUT NO % DEFINED FOR % *
*/*********************************************************
M976 FLDENT MESSAGE=0976, MESSAGE IST976I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, ENTRY NAME X
NO, TABLE TYPE X
NO), RESOURCE NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST983E *
*/* % MESSAGE QUEUE LIMIT EXCEEDED - FURTHER *
*/* MESSAGES WILL BE DISCARDED *
*/*********************************************************
M983 FLDENT MESSAGE=0983, MESSAGE IST983E X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES), POA NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST999E *
*/* VTAM MESSAGE LOST - INSUFFICIENT STORAGE *
*/*********************************************************
M999 FLDENT MESSAGE=0999, MESSAGE IST999E X
TIME=, DEFAULT TO 30 SECONDS X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1000I *
*/* STORAGE UNAVAILABLE IN % *
*/*********************************************************
M1000 FLDENT MESSAGE=1000, MESSAGE IST1000I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES), REASON CODE X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1011I *
*/* ENTRY % NOT FOUND IN % % FOR % *
*/*********************************************************
M1011 FLDENT MESSAGE=1011, MESSAGE IST1011I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, ENTRY NAME X
NO, TABLE TYPE X
YES, TABLE NAME X
NO), RESOURCE NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1136I @A6A*
*/* VARY INACT % SCHEDULED - UNRECOVERABLE ERROR *
*/*********************************************************
M1136 FLDENT MESSAGE=1136, MESSAGE IST1136I @A6AX
TIME=, DEFAULT TO 30 SEC @A6AX
VARTEXT=(NO), NODE NAME @A6AX
HARDCOPY= DEFAULT TO YES @A6A
*/*********************************************************
*/* IST1139I @T1A*
*/* % FOR % FAILED - SENSE: % *
*/*********************************************************
M1139 FLDENT MESSAGE=1139, MESSAGE IST1139I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, RU X
NO, NODE NAME X
YES), SENSE X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1153I @T1A*
*/* % % SESSION %BUF USE % *
*/*********************************************************
M1153 FLDENT MESSAGE=1153, MESSAGE IST1153I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, LU1 X
YES, LU2 X
YES, POOL X
YES), PERCENT X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1211I @T1A*
*/* I/O ERROR % % % % *
*/*********************************************************
M1211 FLDENT MESSAGE=1211, MESSAGE IST1211I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, NODE NAME X
YES, CMD MODIFIER X
YES, RESPONSE X
YES), SENSE X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1213I @T1A*
*/* % LU-LU VERIFY ERROR % *
*/*********************************************************
M1213 FLDENT MESSAGE=1213, MESSAGE IST1213I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, PROFILE NAME X
YES), REASON CODE X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1386I @04A*
*/* DYNAMIC ALLOCATION FAILED FOR % CODE = % REASON = % *
*/*********************************************************
M1386 FLDENT MESSAGE=1386, MESSAGE IST1386I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, DEVICE X
YES, RETURN CODE X
YES), REASON CODE X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1416I @A6A*
*/* ID = % FAILED - RECOVERY IN PROGRESS *
*/*********************************************************
M1416 FLDENT MESSAGE=1416, MESSAGE IST1416I @A6AX
TIME=, DEFAULT TO 30 SEC @A6AX
VARTEXT=(NO), NODE NAME @A6AX
HARDCOPY= DEFAULT TO YES @A6A
*/*********************************************************
*/* IST1421I *
*/* % % HAS DUPLICATE ADDRESS *
*/*********************************************************
M1421 FLDENT MESSAGE=1421, MESSAGE IST1421I @G1MX
VARTEXT=(YES, REAL/ALIAS @A1AX
YES) NAME @A1A
*/*********************************************************
*/* IST1682I @F1A*
*/* HPR/IP % FAILURE: ID = % *
*/*********************************************************
M1682 FLDENT MESSAGE=1682, MESSAGE IST1682I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, SOCKET CALL NAME X
YES), NODE NAME X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1683I @F1A*
*/* HPR/IP % FAILURE: ID = % STATUS = % *
*/*********************************************************
M1683 FLDENT MESSAGE=1683, MESSAGE IST1683I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, CONNECTION TYPE X
YES, NODE NAME X
YES), STATUS X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1684I @F1A*
*/* RETURN CODE = % REASON CODE = % *
*/*********************************************************
M1684 FLDENT MESSAGE=1684, MESSAGE IST1684I X
TIME=, DEFAULT TO 30 SECONDS X
VARTEXT=(YES, RETURN CODE X
YES), REASON CODE X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1686I @F1A*
*/* NO USABLE TCP/IP JOB AVAILABLE FOR HPR/IP *
*/*********************************************************
M1686 FLDENT MESSAGE=1686, MESSAGE IST1686I X
TIME=, DEFAULT TO 30 SECONDS X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1687I @F1A*
*/* HPR/IP PORT NOT AVAILABLE *
*/*********************************************************
M1687 FLDENT MESSAGE=1687, MESSAGE IST1687I X
TIME=, DEFAULT TO 30 SECONDS X
HARDCOPY= DEFAULT TO YES
*/*********************************************************
*/* IST1693I *
*/* NETWORK ADDRESS RECEIVED FOR % IN USE *
*/*********************************************************
M1693 FLDENT MESSAGE=1693, MESSAGE IST1693I @G1MX
TIME=, DEFAULT TO 30 SEC @A1AX
VARTEXT=(NO), REQUEST @A1AX
LIST=1421, LINK TO IST1421I @A1AX
HARDCOPY= DEFAULT TO YES @A1A
*/*********************************************************
*/* IST1694I *
*/* REASON = SEQUENCE NUMBER ERROR *
*/*********************************************************
M1694 FLDENT MESSAGE=1694 MESSAGE IST1694I @A2A
*/*********************************************************
*/* IST1762I *
*/* % ACT FAILED, TCPNAME OR IPADDR START OPTION REQUIRED *
*/*********************************************************
M1762 FLDENT MESSAGE=1762, MESSAGE IST1762I @A3AX
TIME=, DEFAULT TO 30 SEC @A3AX
VARTEXT=(NO), LINE NAME @A3AX
HARDCOPY= DEFAULT TO YES @A3A
*/*********************************************************
*/* IST1774I *
*/* OPTIMAL CNN ROUTE NOT CHOSEN - ENTRY/EXIT *
*/* SUBAREA MISMATCH *
*/*********************************************************
M1774 FLDENT MESSAGE=1774, MESSAGE IST1774I @L2AX
TIME=, DEFAULT TO 30 SEC @L2AX
LIST=1775, LINK TO IST1775I @L2AX
HARDCOPY= DEFAULT TO YES @L2A
*/*********************************************************
*/* IST1775I *
*/* CNN ENTRY SUBAREA = % CNN EXIT SUBAREA = % *
*/*********************************************************
M1775 FLDENT MESSAGE=1775, MESSAGE IST1775I @L2AX
VARTEXT=(YES, CNN ENTRY SUBAREA @L2AX
YES) CNN EXIT SUBAREA @L2A
*/*********************************************************
*/* IST1806I *
*/* NO DIAL-IN LINE FOUND FOR HPR/IP SWITCHED CONNECTION*
*/*********************************************************
M1806 FLDENT MESSAGE=1806, MESSAGE IST1806I @A4AX
TIME=, DEFAULT TO 30 SEC @A4AX
HARDCOPY= DEFAULT TO YES @A4A
*/*********************************************************
*/* IST1807I *
*/* NO DIAL-IN LINE FOR HPR/IP VIRTUAL NODE % *
*/*********************************************************
M1807 FLDENT MESSAGE=1807, MESSAGE IST1807I @A4AX
TIME=, DEFAULT TO 30 SEC @A4AX
VARTEXT=(NO), VRN name @A4AX
HARDCOPY= DEFAULT TO YES @A4A
*/*********************************************************
*/* IST1833I @N1A*
*/* CSALIMIT VALUE MIGHT BE TOO SMALL *
*/*********************************************************
M1833 FLDENT MESSAGE=1833, MESSAGE IST1833I @N1AX
TIME=, DEFAULT TO 30 SEC @N1AX
HARDCOPY= DEFAULT TO YES @N1A
*/**********************************************************
*/* IST1890I @Q3A*
*/* % ACTIVATION FAILED - NO SOURCE IP ADDRESS AVAILABLE *
*/**********************************************************
M1890 FLDENT MESSAGE=1890, MESSAGE IST1890I @Q3AX
TIME=, DEFAULT TO 30 SEC @Q3AX
VARTEXT=(NO), LINE NAME @Q3AX
HARDCOPY= DEFAULT TO YES @Q3A
*/*********************************************************
*/* IST1897I *
*/* % ACTIVATION FAILED - TCPNAME START OPTION REQUIRED *
*/*********************************************************
M1897 FLDENT MESSAGE=1897, MESSAGE IST1897I @Q1AX
TIME=, DEFAULT TO 30 SEC @Q1AX
VARTEXT=(NO), LINE NAME @Q1AX
HARDCOPY= DEFAULT TO YES @Q1A
*/*********************************************************
*/* IST1898I *
*/* % ACTIVATION FAILED - IPADDR REQUIRED *
*/*********************************************************
M1898 FLDENT MESSAGE=1898, MESSAGE IST1898I @Q1AX
TIME=, DEFAULT TO 30 SEC @Q1AX
VARTEXT=(NO), LINE NAME @Q1AX
HARDCOPY= DEFAULT TO YES @Q1A
*/*********************************************************
*/* IST1899I *
*/* % ACTIVATION FAILED - VNNAME/IPADDR MUST BE UNIQUE *
*/*********************************************************
M1899 FLDENT MESSAGE=1899, MESSAGE IST1899I @Q1AX
TIME=, DEFAULT TO 30 SEC @Q1AX
VARTEXT=(NO), LINE NAME @Q1AX
HARDCOPY= DEFAULT TO YES @Q1A
*/************************************************************
*/* IST1903I *
*/* FAILURE OVER VRN vrnname TO CP partner *
*/************************************************************
M1903 FLDENT MESSAGE=1903, Message IST1903I @A5AX
TIME=, Default to 30 sec @A5AX
VARTEXT=(YES,NO), VRNName, Partner @A5AX
HARDCOPY= Default to yes @A5A
*/************************************************************
*/* IST1915I *
*/* % ACTIVATION FAILED - VNNAME ALREADY ACTIVE AS GLOBAL *
*/************************************************************
M1915 FLDENT MESSAGE=1915, MESSAGE IST1915I @Q2AX
TIME=, DEFAULT TO 30 SEC @Q2AX
VARTEXT=(NO), LINE NAME @Q2AX
HARDCOPY= DEFAULT TO YES @Q2A
*/************************************************************
*/* IST1916I *
*/* % ACTIVATION FAILED - VNNAME ALREADY ACTIVE AS LOCAL *
*/************************************************************
M1916 FLDENT MESSAGE=1916, MESSAGE IST1916I @Q2AX
TIME=, DEFAULT TO 30 SEC @Q2AX
VARTEXT=(NO), LINE NAME @Q2AX
HARDCOPY= DEFAULT TO YES @Q2A
*/************************************************************
*/* IST1928I *
*/* SNAMGMT CONNECTION TO userid IS ACTIVE *
*/************************************************************
M1928 FLDENT MESSAGE=1928, MESSAGE IST1928I @Q4AX
TIME=, DEFAULT TO 30 SEC @Q4AX
VARTEXT=(YES), USERID @Q4AX
HARDCOPY= DEFAULT TO YES @Q4A
*/************************************************************
*/* IST1929I *
*/* SNAMGMT CONNECTION TO userid HAS ENDED *
*/************************************************************
M1929 FLDENT MESSAGE=1929, MESSAGE IST1929I @Q4AX
TIME=, DEFAULT TO 30 SEC @Q4AX
VARTEXT=(YES), USERID @Q4AX
HARDCOPY= DEFAULT TO YES @Q4A
*/************************************************************
*/* IST1931I *
*/* SNAMGMT CONNECTION REFUSED FOR userid *
*/************************************************************
M1931 FLDENT MESSAGE=1931, MESSAGE IST1931I @Q4AX
TIME=, DEFAULT TO 30 SEC @Q4AX
VARTEXT=(YES), USERID @Q4AX
HARDCOPY= DEFAULT TO YES @Q4A
*/************************************************************
*/* IST1932I *
*/* SNAMGMT SECURITY CHECK FAILED FOR userid *
*/************************************************************
M1932 FLDENT MESSAGE=1932, MESSAGE IST1932I @Q4AX
TIME=, DEFAULT TO 30 SEC @Q4AX
VARTEXT=(YES), USERID @Q4AX
HARDCOPY= DEFAULT TO YES @Q4A
*/************************************************************
*/* IST1933I *
*/* SNAMGMT SERVER CLOSING CONNECTION TO userid *
*/************************************************************
M1933 FLDENT MESSAGE=1933, MESSAGE IST1933I @Q4AX
TIME=, DEFAULT TO 30 SEC @Q4AX
VARTEXT=(YES), USERID @Q4AX
HARDCOPY= DEFAULT TO YES @Q4A
*/************************************************************
*/* IST1955I *
*/* STALL DETECTED FOR RTP puname TO cpname *
*/************************************************************
M1955 FLDENT MESSAGE=1955, Message IST1955I @R1AX
TIME=, Default to 30 sec @R1AX
VARTEXT=(YES,YES), PUName, CPName @R1AX
HARDCOPY= Default to yes @R1A
*/************************************************************
*/* IST1957I *
*/* STALL ALLEVIATED FOR RTP puname TO cpname *
*/************************************************************
M1957 FLDENT MESSAGE=1957, Message IST1957I @R1AX
TIME=, Default to 30 sec @R1AX
VARTEXT=(YES,YES), PUName, CPName @R1AX
HARDCOPY= Default to yes @R1A
*/************************************************************
*/* IST2058I *
*/* UNREACHABLE PARTNER LIMIT EXCEEDED FOR VRN cpname *
*/************************************************************
M2058 FLDENT MESSAGE=2058, MESSAGE IST2058I @A8AX
TIME=, DEFAULT TO 30 SEC @A8AX
VARTEXT=(YES), CPName @A8AX
HARDCOPY= DEFAULT TO YES @A8A
*/************************************************************
*/* IST2187I *
*/* XCF SEND FAILURE ON TRLE: trlename MESSAGE TYPE: type *
*/************************************************************
M2187 FLDENT MESSAGE=2187, Message IST2187I @A7AX
TIME=, Default to 30 sec @A7AX
VARTEXT=(YES,YES), trlename, type @A7AX
HARDCOPY= Default to yes @A7A
*/************************************************************
*/* IST2245I *
*/* XMIT STALL DETECTED FOR RTP puname TO cpname *
*/************************************************************
M2245 FLDENT MESSAGE=2245, Message IST2245I @E1AX
TIME=, Default to 30 sec @E1AX
VARTEXT=(YES,YES), PUName, CPName @E1A @E2CX
HARDCOPY= Default to yes @E1A
*/************************************************************
*/* IST2247I *
*/* XMIT STALL ALLEVIATED FOR RTP puname TO cpname *
*/************************************************************
M2247 FLDENT MESSAGE=2247, Message IST2247I @E1AX
TIME=, Default to 30 sec @E1AX
VARTEXT=(YES,YES), PUName, CPName @E1A @E2CX
HARDCOPY= Default to yes @E1A
*/************************************************************
*/* IST2342I *
*/* EE HEALTH VERIFICATION NOT SUPPORTED BY puname *
*/************************************************************
M2342 FLDENT MESSAGE=2342, Message IST2342I @H2AX
TIME=, Default to 30 sec @H2AX
VARTEXT=(YES), PUName @H2AX
HARDCOPY= Default to yes @H2A
*/************************************************************
*/* IST2364I *
*/* CLOSE ACB OF applname DID NOT COMPLETE IN A TIMELY *
*/* MANNER *
*/************************************************************
M2364 FLDENT MESSAGE=2364, Message IST2364I @V1AX
TIME=, Default to 30 sec @V1AX
VARTEXT=(YES), APPLName @V1AX
HARDCOPY= Default to yes @V1A
ISTMSFLD FLDEND