Display a summary of the topology database: .-,--LIST--=--SUMMARY-. >>-DISPLAY-- --NET--,--TOPO--+---------------------+-----------><
Notes:
- Depending on the value of the DSPLYWLD start option, wildcard values can be used for this operand.
Notes:
- Depending on the value of the DSPLYWLD start option, wildcard values can be used for this operand.
Rule: The values LIST=UNRCHTIM and LIST=TDUDIAG
are valid on the DISPLAY NET,TOPO command only when the command is
issued on a network node.
Abbreviations
| Operand | Abbreviation |
|---|---|
| CLEAR=YES | CLEAR |
| DISPLAY | D |
| SCOPE=ACTIVITY | ACTIVITY |
| SCOPE=RECENT | RECENT |
Purpose
The DISPLAY TOPO (topology) command displays information about the topology of an APPN network.
This
command is valid in all APPN-capable hosts. However, because end nodes
and migration data hosts do not receive topology updates (TDU) from
other nodes, only local topology resources and brief information
about adjacent nodes can be displayed at end nodes. For example,
you can display detailed information about the local end node and
the TGs originated at that end nodes. The end node's topology database
does not have information about any TGs originated at an adjacent
node to the end node itself. End nodes know the following information
about an adjacent node:
- Network-qualified CP name
- Node type (network node, end node or virtual node)
- Status of the CP-CP sessions between the local end node and the adjacent node
This command displays only the information that is found
in the topology database. Some resources might not be displayed in
a network node or an interchange node for the following reasons:
- No CP-CP session path exists between the resource and the node from which this command is issued.
- Information about end nodes and the resources they own is not broadcast to the network.
- Information between two nonnative nodes is limited to keep them from being used as intermediate nodes.
When you display transmission group (TG) information, the order in which you specify the origin and destination can make a difference. ORIG=A,DEST=B does not necessarily display the same results as ORIG=B,DEST=A.
The following examples illustrate how this command works.
Figure 1. DISPLAY
TOPO topology example 1
In Figure 1, end node A (ENA) has
a CP-CP session with network node 1 (NN1) and an active link to network
node 2 (NN2). Also, a CP-CP session exists between NN1 and NN2. The
command:
D NET,TOPO,ORIG=NN2,DEST=ENAissued
from NN2 displays the requested TG information. However, the command:
D NET,TOPO,ORIG=ENA,DEST=NN2issued from NN2 causes an error message, RESOURCE NOT FOUND. Because ENA is an end node, its TGs are not broadcast to the network, so NN2 does not know that ENA has a TG from ENA to NN2.
Figure 2. DISPLAY TOPO topology example 2
In Figure 2, CP-CP sessions exist
between NN1 and NN2 and between NN2 and NN3. Suppose the link between
NN2 and NN3 goes down. The command:
D NET,TOPO,ORIG=NN2,DEST=NN3issued
from NN1 indicates that the TG is inactive, but the command:
D NET,TOPO,ORIG=NN3,DEST=NN2issued from NN1 indicates that the TG is still active. This is because the link between NN2 and NN3 appears to VTAM®'s topology component to be two one-way TGs, and there is no CP-CP session path available to NN1 so that NN3 can report that the TG from NN3 to NN2 is inactive.
Operands
- APPNCOS=cos_name
- Specifies the Class of Service to be used to calculate the node weight or the TG weight.
- CLEAR
- Specifies whether the TDU information in the topology database
is cleared after the current display operation. After you clear the
TDU information, you can re-enter the command to display the TDU information
that was collected in the time interval between the two commands.
See z/OS Communications Server: SNA Diagnosis Vol
1, Techniques and Procedures for additional information about using the
DISPLAY TOPO command with LIST=TDUINFO and LIST=TDUDIAG to diagnose
TDU problems.
- CLEAR=NO
- No TDU information is cleared.
- CLEAR=YES
- When specified with LIST=TDUINFO or LIST=TDUDIAG summary (no other
operands included), all TDU information is cleared.
When specified with LIST=TDUDIAG for a node or a TG, only TDU diagnostic information for the specified topology resource is cleared.
- DEST=cp_name
- Specifies the destination node (a control point) for a transmission group (TG), or, when used with the LIST=UNRCHTIM operand, the name of an unreachable partner (destination) on an unreachable partner path through an Enterprise Extender connection network. The cp_name value can be network qualified (netid.cpname) or a CP name without a network ID. If just the CP name is entered without a network ID, the network ID of the node on which the command is entered will be used. Depending on the value of the DSPLYWLD start option, wildcard values can be used for this operand.
- FORMAT
- Specifies the format of the display output of TDU information
entries when LIST=TDUINFO is specified or TDU diagnostic entries when
LIST=TDUDIAG is specified without node or TG operands.
When LIST=TDUINFO,SCOPE=RECENT is specified, the FORMAT operand specifies the format of the display output of each TDU information entry for each category of topology resources that were most recently included in TDUs. The TDU information categories are topology resources received and topology resources sent.
When LIST=TDUINFO,SCOPE=ACTIVITY is specified, the FORMAT operand specifies the format of the display output of each TDU information entry for each category of topology resources that were most frequently included in TDUs. The TDU information categories are topology resources received, topology resources sent, and topology resources with RSNs updated by this node.
When LIST=TDUDIAG is specified without node or TG operands, the FORMAT operand specifies the format of the display output of each TDU diagnostic entry for each category of topology resources that were most frequently included in TDUs, and that also have saved TDU diagnostic RSN update records. The TDU diagnostic categories are topology resources received, topology resources sent, and topology resources with RSNs updated by this node.
- FORMAT=SHORT
- Displays one line of output for each TDU information entry or each TDU diagnostic entry. FORMAT=SHORT is the default.
- FORMAT=LONG
- Displays two lines of output for each TDU information entry or each TDU diagnostic entry.
Result: The number of TDU information entries or TDU diagnostic entries that are displayed is determined by the NUM operand value, and is the same whether FORMAT=SHORT or FORMAT=LONG is specified. - ID
- Specifies the name of the resource to display.
- ID=cp_name
- Specifies the name of a control point to display. The cp_name value can be network qualified (netid.cpname) or a CP name without a network ID. If just the CP name is entered without a network ID, the network ID of the node on which the command is entered will be used.
- ID=name
- Specifies the name of a resource to display when used with the
following operands:
- LIST=BN
- LIST=CDSERVR
- LIST=EN
- LIST=ICN
- LIST=NN
- LIST=VN
Depending on the value of the DSPLYWLD start option, wildcard values can be used for this operand. For more information about using wildcards, see Using wildcard names.
- ID=*
- Specifies that all resources are to be displayed.
- LIST
- Specifies the type of information to be displayed.
- LIST=ADJ
- Displays information about nodes that are adjacent to the node specified on the ID operand. (For this command, a node is considered to be adjacent if it is attached by an active transmission group.)
- LIST=ALL
- Displays detailed information about the node specified on the ID operand. If you omit LIST=ALL, VTAM displays brief information about the node.
- LIST=BN
- Displays information about the border nodes specified on the ID operand. If you omit the ID operand, information about all border nodes is displayed. LIST=BN is not valid in end nodes or migration data hosts.
- LIST=CDSERVR
- Displays information about the central directory servers specified on the ID operand. If you omit the ID operand, information about all central directory servers is displayed. LIST=CDSERVR is not valid in end nodes or migration data hosts.
- LIST=EN
- Displays information about the end nodes specified on the ID operand, including migration data hosts (MDH). If you omit the ID operand, information about all end nodes is displayed.
- LIST=ICN
- Displays information about the interchange nodes specified on the ID operand. If you omit the ID operand, information about all interchange nodes is displayed. LIST=ICN is not valid in end nodes or migration data hosts.
- LIST=NN
- Displays information about the network nodes specified on the ID operand, including interchange nodes (ICN). If you omit the ID operand, information about all network nodes is displayed.
- LIST=SUMMARY
- Displays a summary, including how many nodes of each type are in the database. LIST=SUMMARY is the default.
- LIST=TDUDIAG
- Displays diagnostic information about topology database updates
(TDUs).
When no node or TG operands are specified on the command, LIST=TDUDIAG displays summary TDU diagnostic information.
When the ID operand is specified to identify a node, LIST=TDUDIAG displays detailed diagnostic information about resource sequence number (RSN) updates for that node.
When the ORIG, DEST, and TGN operands are specified to identify a TG, LIST=TDUDIAG displays detailed diagnostic information about resource sequence number (RSN) updates for that TG.
Rule: The value LIST=TDUDIAG is valid only when it is entered on a network node. - LIST=TDUINFO
-
Displays information about the topology database updates (TDUs) that are received and sent by this node. This information can be used to detect a TDU war in the network. Because end nodes or migration data hosts never receive TDUs from other nodes and are never involved in TDU wars, LIST=TDUINFO is not valid in end nodes or migration data hosts. See z/OS Communications Server: SNA Diagnosis Vol 1, Techniques and Procedures for additional information about using the DISPLAY TOPO command with LIST=TDUINFO and LIST=TDUDIAG to diagnose TDU problems.
- LIST=UNRCHTIM
- Displays unreachable partner information for Enterprise Extender
connection networks. Unreachable partner information is maintained
only by network nodes and, for this reason, LIST=UNRCHTIM is valid
only on network nodes. Unreachable partner information identifies
paths from one node through an Enterprise Extender virtual node to
a second node that is considered unreachable because of a connection
network dial failure or connection network link INOP condition. When
this occurs, the problem path is remembered for the period of time
specified for the UNRCHTIM for that connection network. During this
period, the problem path will not be considered for new sessions or
HPR path switches. To display unreachable partner information, you can specify one of the following names:
- The name of an origin node on an unreachable partner path, using the ORIG operand
- The name of a virtual node on an unreachable partner path, using the VRN operand
- The name of an unreachable partner (destination) on an unreachable partner path, using the DEST operand
- LIST=VN
- Displays information about the virtual nodes specified on the ID operand. If you omit the ID operand, information about all virtual nodes is displayed.
- LOCSIZE=locate_size
- Specifies that only nodes which support the specified LOCATE message
size are displayed.
If you specify the LOCSIZE operand, you must specify either LIST=EN or LIST=NN.
The LOCATE message size supported by a node is one of the node's resource characteristics distributed to other nodes by TDU broadcasts. Because end nodes and migration data hosts do not receive TDUs from other nodes, this parameter is valid only in network nodes and interchange nodes.
Table 1. LOCSIZE values Value Description 1K Display all network nodes that support Locate message size of 1K. 1K+ Display all network nodes that support Locate message size of 1K and above. 2K Display all network nodes that support Locate message size of 2K. 2K+ Display all network nodes that support Locate message size of 2K and above. 4K Display all network nodes that support Locate message size of 4K. 4K+ Display all network nodes that support Locate message size of 4K and above. 8K Display all network nodes that support Locate message size of 8K. 8K+ Display all network nodes that support Locate message size of 8K and above. 16K Display all network nodes that support Locate message size of 16K. 16K+ Display all network nodes that support Locate message size of 16K and above. 32K Display all network nodes that support Locate message size of 32K. 32K+ Display all network nodes that support Locate message size of 32K and above. 64K Display all network nodes that support Locate message size of 64K. 64K+ Display all network nodes that support Locate message size of 64K and above. 128K Display all network nodes that support Locate message size of 128K. - MAX
- Specifies the maximum number of unreachable partner paths that VTAM displays for this command.
This operand is valid only with LIST=UNRCHTIM.
- MAX=*
- Specifies that the value of the DSPLYMAX start option is used to limit the display output.
- MAX=number_of_unreachable_partner_paths
- Specifies the number of unreachable partner paths that VTAM displays for this command. The valid range is 1–value of DSPLYMAX. The default is the value specified for the DSPLYDEF start option.
Specifying MAX limits the display output. VTAM searches only for the number of instances that you have specified. When that number is found, VTAM does not search any further. This saves processing time for the command and gives you control over the amount of display output generated by the command. If fewer unreachable partner paths are found than you have specified on MAX, VTAM displays only the unreachable partner paths that are found.
- NUM
- Specifies the number of TDU information entries or TDU diagnostic
entries to be displayed. The default value is 10.
When LIST=TDUINFO,SCOPE=RECENT is specified, the NUM operand specifies the number of TDU information entries to be displayed for each category of topology resources that were most recently included in TDUs. The TDU information categories are topology resources received and topology resources sent.
When LIST=TDUINFO,SCOPE=ACTIVITY is specified, the NUM operand specifies the number of TDU information entries to be displayed for each category of topology resources that were most frequently included in TDUs. The TDU information categories are topology resources received, topology resources sent, and topology resources with RSNs updated by this node.
When LIST=TDUDIAG is specified without node or TG operands, the NUM operand specifies the number of TDU diagnostic information entries to be displayed for each category of topology resources that were most frequently included in TDUs, and that also have saved TDU diagnostic RSN update records. The TDU diagnostic information categories are topology resources received, topology resources sent, and topology resources with RSNs updated by this node.
When LIST=TDUDIAG is entered with the ID operand for a node or the ORIG, DEST, and TGN operands for a TG, NUM specifies the number of saved TDU diagnostic RSN update entries to be displayed. The maximum value is 50.
- ORIG=cp_name
- Specifies the origin node (a control point) for a transmission group (TG) or, when used with the LIST=UNRCHTIM operand, the name of an origin end node or network node on an unreachable partner path through an Enterprise Extender connection network. The cp_name value can be network qualified (netid.cpname) or a CP name without a network ID. If just the CP name is entered without a network ID, the network ID of the node on which the command is entered will be used. Depending on the value of the DSPLYWLD start option, wildcard values can be used for this operand.
- SCOPE
- Specifies the type of TDU information to be displayed.
- SCOPE=RECENT
-
Displays information about topology resources that were most recently included in TDUs.
- SCOPE=ACTIVITY
-
Displays information about topology resources with the most frequent TDU activity.
- TGN=tg_number
- Specifies the transmission group number of the route to be displayed. The number must be an integer in the range 1–255.
- VRN=cp_name
- Specifies the name of a virtual node on an unreachable partner path through an Enterprise Extender connection network. The cp_name value can be network qualified (netid.cpname) or a CP name without a network ID. If just the CP name is entered without a network ID, the network ID of the node on which the command is entered will be used. Depending on the value of the DSPLYWLD start option, wildcard values can be used for this operand.
Resulting display
The resulting
display depends on the information that was requested.
- For a summary of the topology, VTAM end
node displays:
- The number of adjacent nodes
- The number of network nodes with a direct connection to this node
- The number of end nodes with a direct connection to this node
- The time and date of the last topology garbage collection
- For brief information for the local end node, VTAM end node displays:
- The network-qualified name of the control point
- The node type
- The current weight of the node, if the Class of Service was specified
- For detailed information for the local end node, VTAM end node displays the short form plus
the following information:
- An indication of whether the node is a migration data host
- The resource sequence number
- The number of days remaining until the node entry is removed from the topology database
- An indication of the level of HPR support provided by the node
- The LOCATE message size supported by the end node
- All TGs owned by the end node
- For brief information for other specific nodes, VTAM end node displays:
- The network-qualified name of the control point
- The node type
- The status of CP-CP sessions between the local end node and the node displayed
- For a summary of the topology, VTAM network
node displays:
- The time and date of the last database checkpoint
- The time and date of the last topology garbage collection
- The time and date of the checkpoint data set recovered during VTAM initialization
- If the routing trees have been cleared, the time and date of the last routing trees clear operation
- The number of adjacent nodes
- The number of network nodes
- The number of end nodes with a direct APPN connection to this node
- The number of end nodes served
- The number of central directory servers
- The number of interchange nodes
- The number of border nodes
- For brief information for a specific node, VTAM network node displays:
- The network-qualified name of the control point
- The node type
- The route addition resistance value
- Whether the node is congested
- The current weight of the node, if the Class of Service was specified
- For brief information for a specific node, VTAM end node displays:
- The network-qualified name of the control point
- The node type
- For detailed information for a specific node, VTAM network node displays the short form plus
the following information:
- An indication of whether the node is a border node
- An indication of whether the node is a central directory server
- An indication of whether the node is an interchange node
- The resource sequence number
- The number of days remaining until the node entry is removed from the topology database
- All TGs owned by the node
- An indication of the level of HPR support provided by the node
- The LOCATE message size supported by the node
- The time and date when the last TDU about this node is received, and the name of the CP that sent the TDU
- The time and date when TDU statistics counts on this resource were reset the last time
- The number of TDUs about this resource sent
- The number of TDUs about this resource received
- The number of TDUs about this resource accepted
- The number of TDUs about this resource rejected
- The number of TDUs about this resource ignored
- For a display of adjacent nodes, VTAM displays
the short form of node information for all nodes known to be adjacent
to the node specified on the ID operand. If ID specifies the name
of (a) the node from which you are issuing this command, or (b) a
node immediately adjacent to the node from which you are issuing this
command, the display indicates whether a CP-CP session exists between
this node and the adjacent nodes. The existence of a CP-CP session
is not displayed if there is one or more nodes between the node from
which the command is issued and the node that is named on the ID operand.
If ID specifies the name of the node from which you are issuing this command, it is possible for the display to indicate TDU congestion, which means that many topology update transactions are in progress on the CP-CP session with an adjacent node. This is a transient condition; the congestion should clear in a short time.
- For a display of one or more TGs, VTAM displays:
- The network-qualified name of the origin control point
- The network-qualified name of the destination control point
- The TG number
- The TG status
- The TG type
- An indication of CP-CP session support
- The current weight of the TG, if a Class of Service was specified on the command. If the origin or destination of the TG is a virtual node, the weight of the TG is divided by two. This smaller weight value is shown in the display.
- The resource sequence number
- The number of days remaining until the TG is removed from the topology database
- An indication of whether the TG is HPR-capable
- The capacity (line speed) of the TG. The value displayed for capacity might not exactly match the value you coded for the resource. See the z/OS Communications Server: SNA Resource Definition Reference for information about how VTAM maps the defined value to the value it actually uses.
- The propagation delay
- The cost per unit time
- The cost per byte
- The security level of the TG
- Three user-defined parameters (default is zero)
- The name of the physical unit if the origin node of the TG is the local node
- The time and date when the TDU statistics counts for the TG were reset
- The time and date when the last TDU about this TG is received, and the name of the CP that sent the TDU
- The number of TDUs about this resource sent
- The number of TDUs about this resource received
- The number of TDUs about this resource accepted
- The number of TDUs about this resource rejected
- The number of TDUs about this resource ignored
- For a display of a particular type of node, VTAM displays the short form of node information for each node in the topology database that matches the pattern specified on the ID operand and the type specified on the LIST operand (BN, CDSERVR, EN, ICN, NN, or VN).
- For a display of an unreachable partner path through an Enterprise
Extender connection network, VTAM displays
the following information:
- The network-qualified name of the Enterprise Extender virtual node
- The total number of unreachable partner paths associated with the virtual node
- If the unreachable partner limit is exceeded for the virtual node, an indication that it is exceeded, along with the lower unreachable partner threshold that must be reached before the virtual node will be used again
- The network-qualified name of the origin node on the unreachable paths through the connection network
- The network-qualified name of the unreachable partner (destination) on the unreachable paths through the connection network
- The unreachable time value specified for the Enterprise Extender connection network
- The time the unreachable time expires for the unreachable paths through the connection network
- For topology database update (TDU) information, LIST=TDUINFO and
LIST=TDUDIAG display the following information:
- Nodes and TGs for which control vector corruption has been detected
- Nodes and TGs whose control vectors have been received in TDUs
- Nodes and TGs whose control vectors have been sent in TDUs
- Nodes and TGs whose resource sequence numbers (RSNs) have been updated, and the network nodes that made the RSN updates
Examples
Displaying a summary
of the topology database at a network node:
d net,topo,list=summary
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1306I LAST CHECKPOINT ADJ NN EN SERVED EN CDSERVR ICN BN
IST1307I 10/23/00 12:32:30 2 3 0 0 0 2 2
IST1781I INITDB CHECKPOINT DATASET LAST GARBAGE COLLECTION
IST1785I 10/21/00 08:00:20 10/23/00 10:19:27
IST314I ENDDisplaying a summary of the topology
database at an end node:
d net,topo,list=summary
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1348I VTAM STARTED AS MIGRATION DATA HOST
IST1805I ONLY LOCAL TOPOLOGY INFORMATION IS AVAILABLE
IST1306I LAST CHECKPOINT ADJ NN EN SERVED EN CDSERVR ICN BN
IST1307I ***NA*** 1 2 1 *NA* *NA* *NA* *NA*
IST1781I INITDB CHECKPOINT DATASET LAST GARBAGE COLLECTION
IST1785I ***NA*** NONE
IST314I ENDDisplaying brief information for a
specific node:
d net,topo,id=a01n
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.A01N NN 1 NONE YES *NA*
IST314I ENDDisplaying brief information for a
specific node, including its weight:
d net,topo,id=a01n,appncos=#connect
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.A01N NN 1 NONE YES 115
IST314I ENDDisplaying detailed information for
a specific node:
d net,topo,id=sscp2a,list=all
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.SSCP2A NN 1 NONE YES *NA*
IST1579I ------------------------------------------
IST1297I ICN/MDH CDSERVR RSN HPR
IST1298I NO NO 8 RTP
IST1579I ------------------------------------------
IST1223I BN NATIVE TIME LEFT LOCATE SIZE
IST1224I NO YES 12 16K
IST924I -------------------------------------------------------------
IST2356I PLATFORM = Z/OS VTAM
IST924I -------------------------------------------------------------
IST2275I TDU INFORMATION SINCE LAST RESET ON 02/11/10 AT 10:48:52
IST1769I LAST TDU RECEIVED - 02/11/10 13:40:14 FROM NETA.SSCP1A
IST2281I LAST TDU SENT - 02/11/10 13:40:20
IST2282I TDU COUNTS:
IST2352I SENT = 3 RECEIVED = 3
IST2353I ACCEPTED = 1 REJECTED = 0
IST2354I IGNORED = 2
IST924I -------------------------------------------------------------
IST1299I TRANSMISSION GROUPS ORIGINATING AT CP NETA.SSCP2A
IST1357I CPCP
IST1300I DESTINATION CP TGN STATUS TGTYPE VALUE WEIGHT
IST1301I NETA.SSCP1A 255 OPER INTERM VRTG YES *NA*
IST314I ENDDisplaying nodes that are adjacent
to the specified node:
d net,topo,id=a01n,list=adj,appncos=#connect
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.A02N NN 1 NONE YES 65
IST1296I NETA.A500N NN 1 NONE YES 145
IST1296I IP.IP GVRN *NA* ***NA*** *NA* *NA*
IST314I ENDDisplaying border nodes:
d net,topo,list=bn
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.SSCP1A NN 1 NONE YES *NA*
IST1296I NETB.SSCP7B NN 128 NONE NO *NA*
IST314I ENDDisplaying central directory servers:
d net,topo,list=cdservr,appncos=#connect
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.A500N NN 1 NONE YES 5
IST314I ENDDisplaying end nodes whose names begin
with "CM2" and end with "A":
d net,topo,list=en,id=cm2*a
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.CM2AA EN *NA* ***NA*** YES *NA*
IST1296I NETA.CM2BA EN *NA* ***NA*** YES *NA*
IST1296I NETA.CM2CDA EN *NA* ***NA*** NO *NA*
IST314I ENDDisplaying interchange nodes:
d net,topo,list=icn
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.A500N NN 1 NONE YES *NA*
IST1296I NETA.A02N NN 1 NONE *NA* *NA*
IST1296I NETA.A01N NN 1 NONE NO *NA*
IST314I ENDDisplaying network nodes:
d net,topo,list=nn
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.SSCP1A NN 1 NONE *NA* *NA*
IST1296I NETA.SSCP2A NN 1 NONE YES *NA*
IST1296I NETA.SSCP7B NN 128 NONE NO *NA*
IST314I ENDDisplaying virtual nodes:
d net,topo,list=vn
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.VN1 VN *NA* ***NA*** *NA* *NA*
IST1296I IP.IP GVRN *NA* ***NA*** *NA* *NA*
IST314I ENDDisplaying transmission group information
at a network node:
d net,topo,orig=sscp1a,dest=sscp2a
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1299I TRANSMISSION GROUPS ORIGINATING AT CP NETA.SSCP1A
IST1357I CPCP
IST1300I DESTINATION CP TGN STATUS TGTYPE VALUE WEIGHT
IST1301I NETA.SSCP2A 21 OPER INTERM YES *NA*
IST1579I ------------------------------------------
IST2241I TIME ISL
IST1163I RSN HPR LEFT WEIGHT
IST1164I 26 YES 12 *NA*
IST1579I ------------------------------------------
IST1302I CAPACITY PDELAY COSTTIME COSTBYTE
IST1303I 32M TERRESTR 0 0
IST1579I ------------------------------------------
IST1304I SECURITY UPARM1 UPARM2 UPARM3
IST1305I UNSECURE 128 128 128
IST1579I ------------------------------------------
IST1736I PU NAME
IST1737I P1234567
IST924I -------------------------------------------------------------
IST2275I TDU INFORMATION SINCE LAST RESET ON 02/11/10 AT 10:48:52
IST1769I LAST TDU RECEIVED - 02/11/10 13:40:14 FROM NETA.SSCP1A
IST2281I LAST TDU SENT - 02/11/10 13:40:20
IST2282I TDU COUNTS:
IST2352I SENT = 10 RECEIVED = 4
IST2353I ACCEPTED = 0 REJECTED = 2
IST2354I IGNORED = 2
IST314I ENDDisplaying transmission group information
for a specific Class of Service at a network node:
d net,topo,orig=sscpca,dest=sscpba,tgn=21,appncos=#connect
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1299I TRANSMISSION GROUPS ORIGINATING AT CP NETA.SSCPCA
IST1357I CPCP
IST1300I DESTINATION CP TGN STATUS TGTYPE VALUE WEIGHT
IST1301I NETA.SSCPBA 21 OPER INTERM YES 210
IST1579I ------------------------------------------
IST2241I TIME ISL
IST1163I RSN HPR LEFT WEIGHT
IST1164I 26 YES 12 *NA*
IST1579I ------------------------------------------
IST1302I CAPACITY PDELAY COSTTIME COSTBYTE
IST1303I 8K TERRESTR 0 0
IST1579I ------------------------------------------
IST1304I SECURITY UPARM1 UPARM2 UPARM3
IST1305I UNSECURE 0 0 0
IST924I -------------------------------------------------------------
IST2275I TDU INFORMATION SINCE LAST RESET ON 02/11/10 AT 10:48:52
IST1769I LAST TDU RECEIVED - 02/11/10 13:40:14 FROM NETA.SSCP1A
IST2281I LAST TDU SENT - 02/11/10 13:40:20
IST2282I TDU COUNTS:
IST2352I SENT = 10 RECEIVED = 4
IST2353I ACCEPTED = 0 REJECTED = 2
IST2354I IGNORED = 2
IST314I ENDDisplaying information about virtual-route-based
transmission groups at a network node:
d net,topo,orig=sscp2a,dest=sscp1a,tgn=255
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1299I TRANSMISSION GROUPS ORIGINATING AT CP NETA.SSCP2A
IST1357I CPCP
IST1300I DESTINATION CP TGN STATUS TGTYPE VALUE WEIGHT
IST1301I NETA.SSCP1A 255 OPER INTERM VRTG YES *NA*
IST1579I ------------------------------------------
IST2241I TIME ISL
IST1163I RSN HPR LEFT WEIGHT
IST1164I 26 YES 12 *NA*
IST1579I ------------------------------------------
IST1302I CAPACITY PDELAY COSTTIME COSTBYTE
IST1303I 8K TERRESTR 0 0
IST1579I ------------------------------------------
IST1304I SECURITY UPARM1 UPARM2 UPARM3
IST1305I UNSECURE 128 128 128
IST924I -------------------------------------------------------------
IST2275I TDU INFORMATION SINCE LAST RESET ON 02/11/10 AT 10:48:52
IST1769I LAST TDU RECEIVED - 02/11/10 13:40:14 FROM NETA.SSCP1A
IST2281I LAST TDU SENT - 02/11/10 13:40:20
IST2282I TDU COUNTS:
IST2352I SENT = 10 RECEIVED = 4
IST2353I ACCEPTED = 0 REJECTED = 2
IST2354I IGNORED = 2
IST314I ENDDisplaying all network nodes or interchange
nodes that support any LOCATE message size:
d net topo,list=nn,locsize=*
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1701I CP NAME LOCATE SIZE
IST1702I NETA.SSCP1A 16K
IST1702I NETA.SSCPBA 1K
IST1702I NETA.SSCP2A 16K
IST314I ENDDisplaying a list of network nodes
or interchange nodes that support a specified LOCATE size with LIST=NN:
d net,topo,list=nn,locsize=16k
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1701I CP NAME LOCATE SIZE
IST1702I NETA.SSCP1A 16K
IST1702I NETA.SSCP2A 16K
IST314I END Displaying a list of end nodes (known
to this NN) or interchange nodes that support a specified LOCATE size:
d net,topo,list=en,locsize=1k
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1701I CP NAME LOCATE SIZE
IST1702I NETA.SSCP1A 1K
IST314I END Displaying detailed information
for the local end node:
d net,topo,id=sscpaa,list=all
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.SSCPAA EN *NA* ***NA*** *NA* *NA*
IST1579I ------------------------------------------
IST1297I ICN/MDH CDSERVR RSN HPR
IST1298I YES *NA* 6 RTP
IST1579I ------------------------------------------
IST1223I BN NATIVE TIME LEFT LOCATE SIZE
IST1224I *NA* *NA* 15 16K
IST1299I TRANSMISSION GROUPS ORIGINATING AT CP NETA.SSCPAA
IST1357I CPCP
IST1300I DESTINATION CP TGN STATUS TGTYPE VALUE WEIGHT
IST1301I NETA.SSCPBA 21 INOP ENDPT YES *NA*
IST1301I NETA.SSCP2A 21 INOP ENDPT YES *NA*
IST1301I NETA.SSCP1A 21 OPER ENDPT YES *NA*
IST314I ENDDisplaying a local TG that originated
at the local end node:
d net,topo,orig=sscpaa,dest=sscp1a
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1299I TRANSMISSION GROUPS ORIGINATING AT CP NETA.SSCPAA
IST1357I CPCP
IST1300I DESTINATION CP TGN STATUS TGTYPE VALUE WEIGHT
IST1301I NETA.SSCP1A 21 OPER ENDPT YES *NA*
IST1579I ------------------------------------------
IST2241I TIME ISL
IST1163I RSN HPR LEFT WEIGHT
IST1164I 14 YES 15 *NA*
IST1579I ------------------------------------------
IST1302I CAPACITY PDELAY COSTTIME COSTBYTE
IST1303I 32M NEGLIGIB 0 0
IST1579I ------------------------------------------
IST1304I SECURITY UPARM1 UPARM2 UPARM3
IST1305I UNSECURE 128 128 128
IST1579I ------------------------------------------
IST1736I PU NAME
IST1737I AHHCPU1
IST314I END Displaying brief information for a
specific node adjacent to the local end node:
d net,topo,id=sscp1a
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST1295I CP NAME NODETYPE ROUTERES CONGESTION CP-CP WEIGHT
IST1296I NETA.SSCP1A NN *NA* ***NA*** YES *NA*
IST314I END Displaying unreachable partner
information for a specific Enterprise Extender virtual node:
d net,topo,vrn=vrn1,list=unrchtim
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST2057I UNREACHABLE PARTNER INFORMATION:
IST924I -------------------------------------------------------------
IST2150I VIRTUAL NODE NETA.VRN1 - 6 UNREACHABLE PARTNERS
IST2052I ORIGIN NODE PARTNER NODE UNRCHTIM EXPIRES
IST2055I NETA.SSCP1A NETWORKB.SSCP7B 300S 23:18:19
IST2055I NETA.SSCP1A NETA.SSCPAA 300S 00:15:42
IST2055I NETA.TEST1 NETWORK1.TEST4444 14500S 01:15:24
IST2055I NETA.SSCP2A NETA.SSCPAA 780S 00:24:10
IST2055I NETA.TEST1234 NETA.SSCPAA 300S 00:16:59
IST2055I NETA.TEST1233 NETWORKB.TEST5555 300S 00:02:33
IST924I -------------------------------------------------------------
IST314I END
Displaying unreachable partner information
for a specific Enterprise Extender origin node and virtual node:
d net,topo,orig=neta.sscp1a,vrn=vrn1,list=unrchtim
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST2057I UNREACHABLE PARTNER INFORMATION:
IST924I -------------------------------------------------------------
IST2150I VIRTUAL NODE NETA.VRN1 - 6 UNREACHABLE PARTNERS
IST2052I ORIGIN NODE PARTNER NODE UNRCHTIM EXPIRES
IST2055I NETA.SSCP1A NETWORKB.SSCP7B 300S 23:18:19
IST2055I NETA.SSCP1A NETA.SSCPAA 300S 00:15:42
IST924I -------------------------------------------------------------
IST314I END
Displaying unreachable partner
information using wildcards:
d net,topo,list=unrchtim,vrn=*.vn*,dest=netb.sscpb*
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST2057I UNREACHABLE PARTNER INFORMATION:
IST924I -------------------------------------------------------------
IST2150I VIRTUAL NODE NET3.VN3 - 15 UNREACHABLE PARTNERS
IST2052I ORIGIN NODE PARTNER NODE UNRCHTIM EXPIRES
IST2055I NETA.SSCP1A NETB.SSCPBA 5000S 17:35:21
IST924I -------------------------------------------------------------
IST2150I VIRTUAL NODE NET4.VN4 - 3 UNREACHABLE PARTNERS
IST2052I ORIGIN NODE PARTNER NODE UNRCHTIM EXPIRES
IST2055I NETA.SSCP1A NETB.SSCPBA 5000S 17:36:48
IST924I -------------------------------------------------------------
IST2150I VIRTUAL NODE NET5.VN5 - 1 UNREACHABLE PARTNERS
IST2052I ORIGIN NODE PARTNER NODE UNRCHTIM EXPIRES
IST2055I NETA.SSCP1A NETB.SSCPBC 5000S 17:38:12
IST314I END Displaying
all unreachable partner information known in this node:
d net,topo,list=unrchtim
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST2057I UNREACHABLE PARTNER INFORMATION:
IST924I -------------------------------------------------------------
IST2150I VIRTUAL NODE NETA.VRN1 - 6 UNREACHABLE PARTNERS
IST2052I ORIGIN NODE PARTNER NODE UNRCHTIM EXPIRES
IST2055I NETA.SSCP1A NETWORKB.SSCP7B 300S 23:18:19
IST2055I NETA.SSCP1A NETA.SSCPAA 300S 00:15:42
IST2055I NETA.TEST1 NETWORK1.TEST4444 14500S 01:15:24
IST2055I NETA.SSCP2A NETA.SSCPAA 780S 00:24:10
IST2055I NETA.TEST1234 NETA.SSCPAA 300S 00:16:59
IST2055I NETA.TEST1233 NETWORKB.TEST5555 300S 00:02:33
IST924I -------------------------------------------------------------
IST2150I VIRTUAL NODE NETB.GVRN2 - 4 UNREACHABLE PARTNERS
IST2052I ORIGIN NODE PARTNER NODE UNRCHTIM EXPIRES
IST2055I NETA.SSCP1A NETA.SSCPAA 1500S 00:40:47
IST2055I NETA.TEST1233 NETWORKB.TEST5555 300S 00:02:33
IST2055I NETA.TEST1234 NETA.SSCPAA 300S 00:16:59
IST2055I NETA.TEST1 NETWORK1.TEST4444 14500S 01:15:24
IST924I -------------------------------------------------------------
IST314I END Displaying
unreachable partner information limited by the MAX operand:
d net,topo,list=unrchtim,max=8
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TOPOLOGY
IST2057I UNREACHABLE PARTNER INFORMATION:
IST924I -------------------------------------------------------------
IST2150I VIRTUAL NODE NETA.VRN1 - 6 UNREACHABLE PARTNERS
IST2052I ORIGIN NODE PARTNER NODE UNRCHTIM EXPIRES
IST2055I NETA.SSCP1A NETWORKB.SSCP7B 300S 23:18:19
IST2055I NETA.SSCP1A NETA.SSCPAA 300S 00:15:42
IST2055I NETA.TEST1 NETWORK1.TEST4444 14500S 01:15:24
IST2055I NETA.SSCP2A NETA.SSCPAA 780S 00:24:10
IST2055I NETA.TEST1234 NETA.SSCPAA 300S 00:16:59
IST2055I NETA.TEST1233 NETWORKB.TEST5555 300S 00:02:33
IST924I -------------------------------------------------------------
IST2150I VIRTUAL NODE NETB.GVRN2 - 44 UNREACHABLE PARTNERS
IST2151I PARTNER LIMIT EXCEEDED - UNUSABLE UNTIL COUNT IS BELOW 32
IST2052I ORIGIN NODE PARTNER NODE UNRCHTIM EXPIRES
IST2055I NETA.SSCP1A NETA.SSCPAA 1500S 00:40:47
IST2055I NETA.TEST1233 NETWORKB.TEST5555 300S 00:02:33
IST1315I DISPLAY TRUNCATED at MAX = 8
IST314I END Displaying
TDU information about topology resources with the most frequent TDU
activity:
D NET,TOPO,LIST=TDUINFO,SCOPE=ACTIVITY
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TDU INFORMATION
IST1780I TOPOLOGY RESOURCES WITH MOST FREQUENT TDU ACTIVITY
IST2275I TDU INFORMATION SINCE LAST RESET ON 02/11/10 AT 10:48:52
IST2290I TDUDIAG START OPTION = 1000
IST2276I NO CORRUPTION OF TOPOLOGY CONTROL VECTORS DETECTED
IST924I -------------------------------------------------------------
IST2286I TDUS RECEIVED:
IST1777I CP NAME RSN DESTINATION CP TGN ACC REJ
IST1778I NETA.SSCP1A 3126 NETA.SSCPAA 21 793 4288
IST1778I NETA.SSCP1A 3128 NETA.SSCPBA 21 793 4260
IST1778I NETA.SSCP1A 3128 NETA.SSCP2A 21 793 4257
IST1778I NETA.SSCPAA 16 NETA.SSCP1A 21 5 2
IST1778I NETA.SSCP2A 4 NETA.SSCPBA 21 2 0
IST1778I NETA.SSCPAA 10 NETA.SSCPBA 21 2 0
IST1778I NETA.SSCPBA 4 NETA.SSCP2A 21 0 1
IST1778I NETA.SSCPBA 4 NETA.SSCPAA 21 0 1
IST1778I NETA.SSCP2A 4 NETA.SSCPAA 21 1 0
IST1778I NETA.SSCP2A 4 NETA.SSCP1A 21 1 0
IST2301I 10 OF 14 TOPOLOGY RESOURCES DISPLAYED
IST924I -------------------------------------------------------------
IST2287I TDUS SENT:
IST2288I CP NAME RSN DESTINATION CP TGN SENT REC
IST1778I NETA.SSCP1A 3126 NETA.SSCPAA 21 5257 5119
IST1778I NETA.SSCP1A 3128 NETA.SSCPBA 21 5231 5101
IST1778I NETA.SSCP1A 3128 NETA.SSCP2A 21 5228 5098
IST1778I NETA.SSCPAA 16 NETA.SSCP1A 21 9 11
IST1778I NETA.SSCPBA 4 NETA.SSCPAA 21 5 1
IST1778I NETA.SSCPBA 4 NETA.SSCP2A 21 4 1
IST1778I NETA.SSCPAA 10 NETA.SSCPBA 21 4 3
IST1778I NETA.SSCP2A 4 NETA.SSCPBA 21 3 3
IST1778I NETA.SSCP2A 4 NETA.SSCPAA 21 3 2
IST1778I NETA.SSCP2A 4 NETA.SSCP1A 21 3 2
IST2301I 10 OF 16 TOPOLOGY RESOURCES DISPLAYED
IST924I -------------------------------------------------------------
IST2289I RESOURCE SEQUENCE NUMBERS UPDATED BY THIS NODE:
IST2292I CP NAME RSN DESTINATION CP TGN UPDATED
IST2293I NETA.SSCPBA 4 NETA.SSCP2A 21 2
IST2293I NETA.SSCPBA 4 NETA.SSCPAA 21 2
IST2293I NETA.SSCPBA 4 NETA.SSCP1A 21 2
IST2301I 3 OF 3 TOPOLOGY RESOURCES DISPLAYED
IST314I END Displaying TDU information about topology
resources that were most recently included in TDUs:
D NET,TOPO,LIST=TDUINFO,SCOPE=RECENT
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TDU INFORMATION
IST1776I TOPOLOGY RESOURCES WITH MOST RECENT TDU ACTIVITY
IST2275I TDU INFORMATION SINCE LAST RESET ON 02/11/10 AT 10:48:52
IST2290I TDUDIAG START OPTION = 1000
IST2276I NO CORRUPTION OF TOPOLOGY CONTROL VECTORS DETECTED
IST924I -------------------------------------------------------------
IST1779I TDUS RECEIVED BETWEEN 02/11/10 13:40:14 - 02/11/10 13:40:14
IST1777I CP NAME RSN DESTINATION CP TGN ACC REJ
IST1778I NETA.SSCP1A 3126 NETA.SSCPAA 21 793 4288
IST1778I NETA.SSCP1A 3128 NETA.SSCP2A 21 793 4257
IST1778I NETA.SSCP1A 3124 NETA.SSCPAA 21 792 4288
IST1778I NETA.SSCP1A 3122 NETA.SSCPAA 21 791 4288
IST1778I NETA.SSCP1A 3128 NETA.SSCPBA 21 793 4260
IST1778I NETA.SSCP1A 3126 NETA.SSCP2A 21 792 4257
IST1778I NETA.SSCP1A 3126 NETA.SSCPBA 21 792 4260
IST1778I NETA.SSCP1A 3124 NETA.SSCPBA 21 791 4260
IST1778I NETA.SSCP1A 3124 NETA.SSCP2A 21 791 4257
IST1778I NETA.SSCP1A 3122 NETA.SSCP2A 21 790 4257
IST2301I 10 OF 50 TOPOLOGY RESOURCES DISPLAYED
IST924I -------------------------------------------------------------
IST2285I TDUS SENT BETWEEN 02/11/10 13:40:14 - 02/11/10 13:40:20
IST2288I CP NAME RSN DESTINATION CP TGN SENT REC
IST1778I NETA.SSCP1A 3126 NETA.SSCPAA 21 5257 5119
IST1778I NETA.SSCP1A 3128 NETA.SSCP2A 21 5228 5098
IST1778I NETA.SSCP1A 3124 NETA.SSCPAA 21 5256 5118
IST1778I NETA.SSCP1A 3122 NETA.SSCPAA 21 5255 5117
IST1778I NETA.SSCP1A 3128 NETA.SSCPBA 21 5231 5101
IST1778I NETA.SSCP1A 3126 NETA.SSCP2A 21 5227 5097
IST1778I NETA.SSCP1A 3126 NETA.SSCPBA 21 5230 5100
IST1778I NETA.SSCP1A 3124 NETA.SSCPBA 21 5229 5099
IST1778I NETA.SSCP1A 3124 NETA.SSCP2A 21 5226 5096
IST1778I NETA.SSCP1A 3122 NETA.SSCP2A 21 5225 5095
IST2301I 10 OF 50 TOPOLOGY RESOURCES DISPLAYED
IST314I ENDDisplaying TDU information, with FORMAT=LONG,
about topology resources that were most recently included in TDUs:
D NET,TOPO,LIST=TDUINFO,SCOPE=RECENT,FORMAT=LONG,NUM=2
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TDU INFORMATION
IST1776I TOPOLOGY RESOURCES WITH MOST RECENT TDU ACTIVITY
IST2275I TDU INFORMATION SINCE LAST RESET ON 02/11/10 AT 10:48:52
IST2290I TDUDIAG START OPTION = 1000
IST2276I NO CORRUPTION OF TOPOLOGY CONTROL VECTORS DETECTED
IST924I -------------------------------------------------------------
IST1779I TDUS RECEIVED BETWEEN 02/11/10 13:40:14 - 02/11/10 13:40:14
IST2357I CP NAME RSN DESTINATION CP TGN
IST2358I NETA.SSCP2A 24369982 NETA.SSCP1A 21
IST2353I ACCEPTED = 1435981 REJECTED = 2537561
IST2358I NETA.SSCP2A 24369980 NETA.SSCP1A 21
IST2353I ACCEPTED = 1435981 REJECTED = 2537560
IST2301I 2 OF 50 TOPOLOGY RESOURCES DISPLAYED
IST924I -------------------------------------------------------------
IST2285I TDUS SENT BETWEEN 02/11/10 13:40:14 - 02/11/10 13:40:20
IST2357I CP NAME RSN DESTINATION CP TGN
IST2358I NETA.SSCP2A 24369984 NETA.SSCP1A 21
IST2352I SENT = 4296828 RECEIVED = 65097324
IST2358I NETA.SSCP2A 24369982 NETA.SSCP1A 21
IST2352I SENT = 4296827 RECEIVED = 65097323
IST2301I 2 OF 50 TOPOLOGY RESOURCES DISPLAYED
IST314I ENDDisplaying a summary of topology database
update (TDU) diagnostic information:
D NET,TOPO,LIST=TDUDIAG
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TDU DIAGNOSTICS
IST2274I TDU DIAGNOSTIC SUMMARY:
IST1780I TOPOLOGY RESOURCES WITH MOST FREQUENT TDU ACTIVITY
IST2308I THAT HAVE SAVED TDUDIAG RSN UPDATES
IST2275I TDU INFORMATION SINCE LAST RESET ON 02/11/10 AT 13:11:32
IST2290I TDUDIAG START OPTION = 1000
IST2276I NO CORRUPTION OF TOPOLOGY CONTROL VECTORS DETECTED
IST924I -------------------------------------------------------------
IST2286I TDUS RECEIVED:
IST1777I CP NAME RSN DESTINATION CP TGN ACC REJ
IST1778I NETA.SSCP1A 3126 NETA.SSCPAA 21 793 4288
IST1778I NETA.SSCP1A 3128 NETA.SSCP2A 21 793 4257
IST1778I NETA.SSCP1A 3128 NETA.SSCPBA 21 793 4260
IST2301I 3 OF 3 TOPOLOGY RESOURCES DISPLAYED
IST924I -------------------------------------------------------------
IST2287I TDUS SENT:
IST2288I CP NAME RSN DESTINATION CP TGN SENT REC
IST1778I NETA.SSCP1A 3126 NETA.SSCPAA 21 5257 5119
IST1778I NETA.SSCP1A 3128 NETA.SSCP2A 21 5228 5098
IST1778I NETA.SSCP1A 3128 NETA.SSCPBA 21 5231 5101
IST2301I 3 OF 3 TOPOLOGY RESOURCES DISPLAYED
IST924I -------------------------------------------------------------
IST2289I RESOURCE SEQUENCE NUMBERS UPDATED BY THIS NODE:
IST2301I 0 OF 0 TOPOLOGY RESOURCES DISPLAYED
IST314I END Displaying TDU diagnostic information
for a node:
D NET,TOPO,LIST=TDUDIAG,ID=SSCP1A,NUM=3
IST350I DISPLAY TYPE = TDU DIAGNOSTICS
IST2306I TDU DIAGNOSTIC INFORMATION FOR NODE: ID = NETA.SSCP1A
IST2290I TDUDIAG START OPTION = 1000
IST2312I CURRENT RSN = 8 - HEX RSN = 00000008
IST924I -------------------------------------------------------------
IST2275I TDU INFORMATION SINCE LAST RESET ON 01/29/10 AT 11:43:47
IST1769I LAST TDU RECEIVED - 01/29/10 15:43:25 FROM NETA.SSCP2A
IST2281I LAST TDU SENT - 01/29/10 15:42:14
IST2282I TDU COUNTS:
IST2352I SENT = 6 RECEIVED = 8
IST2353I ACCEPTED = 3 REJECTED = 0
IST2354I IGNORED = 5
IST2313I RSN UPDATE COUNT = 2
IST924I -------------------------------------------------------------
IST2294I TDUDIAG RSN UPDATES:
IST2295I TIME HEX RSN HEX RSN
IST2296I CP NAME UPDATED BEFORE AFTER REASON
IST2297I NETA.SSCP1A 15:43:25 00000006 00000008 TDU GREATER
IST2300I RECEIVED FROM: NETA.SSCP1A
IST2297I NETA.SSCPBA 15:42:14 00000004 00000006 F QUIESCE
IST2297I NETA.SSCP1A 15:40:02 00000002 00000004 NODE UPDATE
IST2300I RECEIVED FROM: NETA.SSCPAA
IST2314I 3 OF 4 RSN UPDATES DISPLAYED
IST314I ENDDisplaying TDU diagnostic information
for a TG:
D NET,TOPO,LIST=TDUDIAG,ORIG=SSCP1A,DEST=SSCPBA,TGN=21
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = TDU DIAGNOSTICS
IST2311I TDU DIAGNOSTIC INFORMATION FOR TG: TGN = 21
IST2256I ORIG = NETA.SSCP1A - DEST = NETA.SSPCBA
IST2290I TDUDIAG START OPTION = 1000
IST2312I CURRENT RSN = 3128 - HEX RSN = 00000C38
IST2355I TDUDIAG THRESHOLD REACHED ON 02/11/10 AT 13:37:08
IST924I -------------------------------------------------------------
IST2275I TDU INFORMATION SINCE LAST RESET ON 02/11/10 AT 10:48:52
IST1769I LAST TDU RECEIVED - 02/11/10 13:40:14 FROM NETA.SSCP1A
IST2281I LAST TDU SENT - 02/11/10 13:40:20
IST2282I TDU COUNTS:
IST2352I SENT = 3890 RECEIVED = 5101
IST2353I ACCEPTED = 793 REJECTED = 4260
IST2354I IGNORED = 48
IST2313I RSN UPDATE COUNT = 4260
IST924I -------------------------------------------------------------
IST2294I TDUDIAG RSN UPDATES:
IST2295I TIME HEX RSN HEX RSN
IST2296I CP NAME UPDATED BEFORE AFTER REASON
IST2297I NETA.SSCP1A 13:40:20 00000C36 00000C38 TDU GREATER
IST2300I RECEIVED FROM: NETA.SSCP1A
IST2297I NETA.SSCP1A 13:40:20 00000C34 00000C36 TDU GREATER
IST2300I RECEIVED FROM: NETA.SSCP2A
IST2297I NETA.SSCP1A 13:40:19 00000C32 00000C34 TDU GREATER
IST2300I RECEIVED FROM: NETA.SSCP1A
IST2297I NETA.SSCP1A 13:40:19 00000C30 00000C32 TDU GREATER
IST2300I RECEIVED FROM: NETA.SSCPAA
IST2297I NETA.SSCP1A 13:40:19 00000C2E 00000C30 TDU GREATER
IST2300I RECEIVED FROM: NETA.SSCP1A
IST2297I NETA.SSCP1A 13:40:19 00000C2C 00000C2E TDU GREATER
IST2300I RECEIVED FROM: NETA.SSCPAA
IST2297I NETA.SSCP1A 13:40:19 00000C2A 00000C2C TDU GREATER
IST2300I RECEIVED FROM: NETA.SSCP1A
IST2297I NETA.SSCP1A 13:40:19 00000C28 00000C2A TDU GREATER
IST2300I RECEIVED FROM: NETA.SSCP2A
IST2297I NETA.SSCP1A 13:40:19 00000C26 00000C28 TDU GREATER
IST2300I RECEIVED FROM: NETA.SSCP1A
IST2297I NETA.SSCP1A 13:40:18 00000C24 00000C26 TDU GREATER
IST2300I RECEIVED FROM: NETA.SSCPAA
IST2314I 10 OF 50 RSN UPDATES DISPLAYED
IST314I END