Explanation
This message is part of several different message
groups and subgroups that VTAM® issues
in response to a DISPLAY command.
This message serves as a
header message for the display and identifies the type of information
shown in the display. The message group contains further identification
and status information.
type is the type
of information or resource being displayed and can be one of the following:
- ADJACENT CLUSTER TABLE
- The display contains the adjacent subnetwork routing list for
the specified network ID and the status of each border node in the
list.
- ADJACENT CONTROL POINT
- The display contains the attributes of a specific adjacent control
point node definition and the connections that are assigned to it.
- ADJACENT SSCP TABLE
- The display contains a list of adjacent SSCPs used for routing
session initiation requests.
- APPL MAJ NODES/NAMES
- The display contains the name and status of all active application
program major nodes in the domain and the application programs contained
in those nodes.
- APPN COS
- The display contains a list of APPN class of service (CoS) entries
and the name of the last APPNCOS table that was used to create or
update the CoS entry .
- APPNTOSA
- The display shows the corresponding APPN and subarea class of
service (CoS) mappings.
- AUTOLOG
- The display contains information relative to pending autologon
requests.
- BLOCKED VIRTUAL ROUTES
- The display shows the blocked Virtual Routes.
- BNCOSMAP
- The display shows the corresponding nonnative and native class
of service (CoS) names.
- BUFFER POOL DATA
- The display describes VTAM buffer
storage usage.
- CDRMS
- The display contains the status of cross-domain resource managers
known to this host processor.
- CDRSCS
- The display contains the status of cross-domain resources known
to this domain.
- CLUSTERS/PHYS UNITS
- The display contains the name and status of physical units in
the domain.
- CSDUMP TRIGGERS
- The display contains the message and sense CSDUMP triggers.
- DIRECTORY
- The display contains directory services information about resources.
- DLURS
- The display contains the dependent LU requesters (DLURs) that
are supported by the dependent LU server (DLUS) and their CPSVRMGR
session pipe status. The CPSVRMGR pipe consists of two LU 6.2 sessions,
a contention winner (conwinner) and a contention loser (conloser).
The status of both sessions is displayed.
- EE
- The display contains Enterprise Extender information known to
this APPN node.
- EEDIAG
- The display contains Enterprise Extender (EE) diagnostic information
known to this APPN node for specific EE connections that meet specified
thresholds.
- EXIT
- The display contains the name and status of user-written exit
routines.
- GENERIC AFFINITY
- The display contains information about generic resource affinities
in the generic resource coupling facility structure.
- GR PREFERENCES TABLE
- The display shows the generic resource preference table.
- GROUPS
- The display contains the name and status of each group in the
domain.
- HELD VIRTUAL ROUTES
- The display shows the Held Virtual Routes.
- LINES
- The display contains the name and status of lines in the domain.
- LOGICAL UNITS/TERMS
- The display contains the name and status of logical units in the
domain.
- LUGROUP MAJOR NODES
- The display contains the names of all LUGROUP major nodes in the
domain.
- MAJOR NODES
- The display contains the status of all active major nodes in the
domain.
- MODELS
- The display contains either the names of model major nodes in
the domain and the model minor nodes contained in those major nodes,
or the name, if any, of a model application definition.
- NETWORK NODE SERVER LIST
- The display contains the names of all the network nodes currently
allowed to act as network node server for this end node.
- NETWORK SEARCH
- The display contains the results of an operator-initiated search
for a specified resource name.
- PATH TABLE CONTENTS
- The display contains a listing of paths defined to this host processor.
- PENDING
- The display contains the names of all nodes in a pending state.
- RSCLIST
- The display contains information about resources whose names match
a particular pattern.
- SAMAP TABLE
- The display shows the mapping of a desired session path through
a composite network node (CNN) environment. The table can be used
to specify the desired session path through other CNNs in the network
if the subarea numbers are unique across all of the CNNs in the APPN
subnetwork.
- SATOAPPN
- The display shows the corresponding SA and APPNCOS mappings.
- SESSIONS
- The display contains a count of all queued, pending, and active
sessions in the domain. The display might also contain the status
and partner names for each session in the domain.
- SNSFILTR
- The display contains user-specified sense codes.
- SRCHINFO
- The display contains outstanding search request information.
- STATIONS
- The display contains the name and status of link stations in the
domain.
- STATS,TYPE=CFS
- The display contains the current statistics for the coupling facility
structure.
- STATS,TYPE=COMPRESS
- The display contains compression levels and the number of half-sessions
(one end of a session) using that level of compression on input or
output session traffic.
- STATS,TYPE=VTAM
- The display contains VTAM storage
estimates statistics in response to the DISPLAY STATS command.
- STORAGE USAGE
- The display describes VTAM utilization
of storage pools and data spaces.
- SUBAREA COS
- The display contains the class of service (CoS) table name for
a particular network or all networks associated with a specified PU
type 4 or 5.
- TDU DIAGNOSTICS
- The display contains TDUDIAG diagnostic information that can
be used for problem determination about topology database updates
(TDUs) for topology resources (nodes and TGs). A DISPLAY TOPO command
with LIST=TDUDIAG provides this information.
- TDU INFORMATION
- The display contains information that can be used for problem
determination about topology database updates (TDUs) that were received
and sent for topology resources (nodes and TGs). A DISPLAY TOPO command
with LIST=TDUINFO provides this information.
- TGPS
- The display contains the currently defined transmission group
profiles by name, along with the transmission group characteristics
they represent.
- TNSTAT
- The display contains the settings of both global and TRLE group
tuning statistics, as well as whether the tuning statistics reports
are being displayed at the system console and the tuning statistics
reporting interval. The display will also indicate if SMF is unavailable.
- TOPOLOGY
- The display contains topology information that can be used for
problem determination and network verification purposes. It provides
information such as link outages, unacceptable routing nodes or links,
and node connectivity.
- TRACES,TYPE=CNM
- The display contains the status of the CNM buffer trace. CNM buffer
traces are PDPIUBUF (Problem Determination PIU buffer) and SAWBUF
(Session Awareness buffer).
- TRACES,TYPE=MODULE
- The display contains information about module tracing.
- TRACES,TYPE=NODES
- The display contains the status of the BUF, GPT, IO, LINE, SIT,
and TG trace for a particular resource and its subordinate nodes.
- TRACES,TYPE=ROUTE
- The display contains the status of the APPN route selection trace.
- TRACES,TYPE=STATE
- The display contains information about resource state tracing,
for example, which types of resources are being traced.
- TRACES,TYPE=SMS
- The display contains the status of the SMS buffer trace.
- TRACES,TYPE=TSO
- The display contains the status of the TSO trace for one or more
TSO user IDs.
- TRACES,TYPE=VTAM
- The display contains the status of the VTAM internal trace.
- TRL
- The display contains the status and data link control of each
element in the active transport resource list.
- USERVAR
- The display contains the name and status of all USERVARs in the
domain.
- VTAMSTOR
- The display contains the storage contents associated with VTAM modules and resources.
System action
Operator response
System programmer response
Routing code
Descriptor code