IST1594I

Explanation
 This message is issued in a message group with
message IST605I. A complete description of the message group follows
the example.  IST605I  ERROR FOR ID = nodename – text1 : text2
IST1594I  CPNAME IN CONTACTED REQUEST SAME AS SSCPNAME
IST314I  END

 IST605I
 A request from nodename failed.
 text1 : text2 specifies
the RU in error, and is REQUEST  :  CONTACTED for this message
group.
 IST1594I
 The CPNAME received in control
vector (CV) X'0E' appended to the XID is the same as this
host’s SSCPNAME start parameter. 

System action
 nodename is deactivated. 

Operator response
 Save the system log for problem determination. 

System programmer response
  If the node should be activated, then the CPNAME must be corrected
before the reactivation can succeed.  The cpname is most probably
configured or defined in the node nodename that
is being contacted.
If the problem persists, try to create the problem again while
an I/O trace or buffer trace is running for the affected nodename.
If nodename is link-attached, run a line trace
for the affected line.  Enter a MODIFY TRACE,ID=ncpname command,
where ncpname is the name of the NCP major
node that contains the peripheral PU or link station nodename (as
opposed to the NCP major node adjacent to the link station nodename).

Routing code
 2

Descriptor code
 5