Explanation
This message is the first in a group of messages
that VTAM® issues when the request
runame for
node
nodename failed with sense code
code.
A complete description of the message group follows.
IST1139I runame FOR nodename FAILED – SENSE: code
IST1045I NODE TYPE = nodetype
[IST1840I DLUR = dlurname]
IST314I END
IST1840I - dlurname is the network-qualified CP name
of the dependent LU requester (DLUR) in the form netid.name. It is
the DLUR associated with nodename in message IST1139I.
System action
VTAM does
not perform the request runame.
When VTAM receives
a failing activation request for RUs such as ACTLINK, CONTACT, ACTLU,
or ACTPU, VTAM usually deactivates
the resource and all subordinate resources, regardless of whether
the resource was being activated or deactivated.
Operator response
- Attempt to activate or trace the node again.
- If a failure still occurs, save the system log for problem determination.
- If VTAM issues this message
repeatedly, disable the line. Save the system log for problem determination.
- If code indicates a storage problem, wait a
short time and reenter the command. If VTAM continues
to issue this message, enter the DISPLAY BFRUSE command to display
storage used by VTAM buffer
pools and information about the common service area (CSA). Message
IST981I displays total VTAM private
storage information. Issue the DISPLAY STORUSE command to display
storage usage for storage pools.
Save the system log and request
a dump for problem determination.
- Sense Code 081Cnnnn
Correct the cause indicated
by the user portion of the sense code (nnnn),
and try the command again.
System programmer response
- If code indicates a storage problem, increase
storage as required. For insufficient storage errors, you might want
to redefine your buffer pool or CSA start options. If the start option
cannot be modified using the MODIFY VTAMOPTS command, you must modify
the VTAM start options file
(ATCSTRxx) and restart VTAM to use the start option.
- Sense Code 081Cnnnn
If an ACTLINK request failed
on a VARY ACT request with the sense code of 081Cnnnn,
check the CUADDR operand of the PU (local SNA) or PCCU definition
statement to make sure that the correct channel unit address (CUA) was specified
for the node nodename.
If sense code 081C0010
is received and message IST1386I is issued, see the return code and
reason code in message IST1386I to determine the cause of the failure.
- Sense Code 08A30001
If VTAM issues
sense code 08A30001 repeatedly, determine the subarea node that is
attempting to establish a switched connection. If the SSCP is authorized
to request that connection, verify that both SSCPs have identical
PRTCT operands coded for their PU statements on the switched major
nodes. Also verify that both nodes and their SSCPs are of a level
that supports call security verification.
VTAM might issue this message with sense code
08A30001 because an unauthorized subarea node is attempting to establish
a switched connection to the host that received the message.
- You might need to include the LUDRPOOL macro in the NCP generation.
- Make sure that the device is available to the system and that
there are no hardware problems.
Routing code
Descriptor code