The following commands or RU types might appear in VTAM® messages.
| Command |
Function |
|---|---|
| ABCONN | Abandon Connection |
| ABCONNOUT | Abandon Connect Out |
| ACTCDRM | Activate CDRM |
| ACTCONNIN | Activate Connect In |
| ACTIVATE | Activate |
| ACTLINK | Activate Link |
| ACTLU | Activate LU |
| ACTPU | Activate PU |
| ACTTRACE | Activate Trace |
| ACTVR | Activate Virtual Route |
| ADDNR | Add Network Resource |
| AM ADDLINK | Add Link |
| AM ADDLSTA | Add Link Station |
| AM ADRQCMP | Address Request Complete |
| AM ALLORSC | Allocate Resource |
| AM CLEANUP | Cleanup |
| AM CLSACB | Close ACB |
| AM CONNECT | Connect |
| AM CONDLOD | Request Conditional Load |
| AM CS | Configuration Services |
| AM DEACTXF | Deactivate Transforms |
| AM DELETNR | Delete Network Resource |
| AM DISCNCT | Disconnect |
| AM FLUSH | Flush Virtual Route |
| AM FREERSC | Free Resource |
| AM GAINGWN | Gained Gateway Node |
| AM GBIND | Generic BIND |
| AM GENTERM | Generic Terminate |
| AM GUNBIND | Generic UNBIND |
| AM INIT_PU | Initialize PU |
| AM LOSTGWN | Lost Gateway Node |
| AM NFY SLT | Notify (Schedule LOSTERM Exit) |
| AM NOTIFY | Notify |
| AM OPNACB | Open ACB |
| AM OSA | Override Session Address |
| AM PCE | Purge Chain Element |
| AM PWQ | Purge Wait Queue |
| AM RDTADD | Resource Definition Add |
| AM REALLOC | Reallocate |
| AM REQ ERA | Request Explicit Route Activate |
| AM REQ VRD | Request Virtual Route Deactivate |
| AM REQDUMP | Request Dump |
| AM REQLOAD | Resource Load |
| AM RESETRT | Reset Routable State |
| AM RESUME | Resume; used to redrive session setup processing. |
| AM RNAA | Request Network Address Assignment |
| AM SC AMRU | Switched Connection AMRU |
| AM SC EXIT | Switched Connection Exit |
| AM SETRT | Set Routable State |
| AM SSA | Set Session Address |
| AM SSADISC | Set Session Address and Disconnect |
| AM UNCDLOD | Request Unconditional Load |
| AM VR INOP | Virtual Route Inoperative |
| AM VR STAT | Virtual Route Status |
| ANA | Assign Network Address |
| ANS | Auto Network Shutdown Started |
| ANSC | Auto Network Shutdown Complete |
| API CHEF | API CHANGE(ENDAFFNF) |
| API CHGEAF | CHANGE(ENDAFFIN) macro |
| API CLSPAS | CLSDST(PASS) macro |
| API CLSRLS | CLSDST(RELEASE) macro |
| API INQAPS | INQUIRE(APPSTAT) macro |
| API INQCID | INQUIRE(CIDXLATE) macro |
| API INQCNT | INQUIRE(COUNTS) macro |
| API INQDPY | INQUIRE(DISPLAY) macro |
| API INQDVC | INQUIRE(DEVCHAR) macro |
| API INQLOG | INQUIRE(LOGONMSG) macro |
| API INQNQN | INQUIRE(NQN) macro |
| API INQPER | INQUIRE(PERSESS) macro |
| API INQSKY | INQUIRE(SESSKEY) macro |
| API INQSNM | INQUIRE(SESSNAME) macro |
| API INQSPM | INQUIRE(SESSPARMS) macro |
| API INQSTA | INQUIRE(STATUS)macro |
| API INQTOP | INQUIRE(TOPLOGON) macro |
| API INQTRM | INQUIRE(TERMS) macro |
| API INTERP | INTRPRET macro |
| API OPNACC | OPNDST(ACCEPT) macro |
| API OPNACQ | OPNDST(ACQUIRE) macro |
| API OPNRES | OPNDST(RESTORE) macro |
| API OPNSEC | OPNSEC macro |
| API RCVCMD | RCVCMD macro |
| API RECEIV | RECEIVE macro |
| API REQSES | REQSESS macro |
| API RSETSR | RESETSR macro |
| API SEND | SEND macro |
| API SESONC | SESSIONC macro |
| API SETGNA | SETLOGON(GNAMEADD) macro |
| API SETGND | SETLOGON(GNAMEDEL) macro |
| API SETLQS | SETLOGON(QUIESCE) macro |
| API SETLSP | SETLOGON(STOP) macro |
| API SETLST | SETLOGON(START) macro |
| API SETNPE | SETLOGON(NPERSIST) macro |
| API SETPER | SETLOGON(PERSIST) macro |
| API SIMLOG | SIMLOGON macro |
| API SNDCMD | SENDCMD macro |
| API TRMSES | TERMSESS macro |
| BFCINIT | Boundary Function Control Initiate |
| BFCLEANUP | Boundary Function Cleanup |
| BFINIT | Boundary Function Initiate |
| BFTERM | Boundary Function Terminate |
| BFSESSEND | Boundary Function Session End |
| BFSESSINFO | Boundary Function Session Information |
| BFSESSST | Boundary Function Session Start |
| BID | Bid |
| BIND | Bind Session |
| BIND FAIL | Bind Failure |
| BIS | Bracket Initiation Stopped |
| CANCEL | Cancel |
| CD NOTIFY | Cross-Domain Notify |
| CDCINIT | Cross-Domain Control Initiate |
| CDINIT OTH | Cross-Domain Initiate (Other) |
| CDRM CLEAR | Clear CDRM-CDRM Session |
| CDRM ERP | CDRM ERP Internal Clear |
| CDSESSEND | Cross-Domain Session Ended |
| CDSESSST | Cross-Domain Session Started |
| CDSSF | Cross-Domain Session Setup Failure |
| CDSTF | Cross-Domain Session Takedown Failure |
| CDTAKEDOWN | Cross-Domain Takedown |
| CDTD COMP | Cross-Domain Takedown Complete |
| CDTERM | Cross-Domain Terminate |
| CHAR CODED | Unformatted Request Unit |
| CHASE | Chase |
| CHG NRSPOL | Change Negative Response to Poll Limit |
| CHG POLLIM | Change Poll Limit |
| CHG SESSLM | Change Session Limit |
| CHG TLIMIT | Change Transmission Limit |
| CHKPT | Checkpoint Resource Status Function |
| CINIT | Control Initiate |
| CKPTN | Checkpoint Node Status Function |
| CLEANUP | Cleanup |
| CLEAR | Clear Session |
| CNM | Communications Network Management Request |
| CONNOUT | Connect Out |
| CONTACT | Contact |
| CONTACTED | Contacted |
| CPCRYPT | Cryptography Management Function |
| CPMSG | Internal WTOR Function |
| CRV | Cryptography Verify |
| CTERM | Control Terminate |
| D ADJCP | DISPLAY ADJACENT CONTROL POINT command |
| D ADJCLUST | DISPLAY ADJACENT CLUSTER TABLE command |
| D BNCOSMAP | DISPLAY BORDER NODE CLASS-OF-SERVICE MAPPING command |
| D CNOS | DISPLAY CHANGE NUMBER OF SESSIONS command |
| D CONVID | DISPLAY CONVERSATION ID command |
| D DLURS | DISPLAY DLURS command |
| D DIRECTRY | DISPLAY DIRECTORY command |
| D DISK | DISPLAY DISK command |
| D LMTBL | DISPLAY LU-MODE TABLE command |
| D NCPSTOR | DISPLAY NCP STORAGE command |
| D NETSRVR | DISPLAY NETWORK NODE SERVER LIST command |
| D PATHTAB | DISPLAY PATH TABLE command |
| D SAMAP | DISPLAY SAMAP command |
| D STORUSE | DISPLAY STORAGE USAGE command |
| D TGPS | DISPLAY TRANSMISSION GROUP PROFILES command |
| D TOPO | DISPLAY TOPOLOGY command |
| D TRACES | DISPLAY TRACES command |
| D VTAMOPTS | DISPLAY VTAM START OPTIONS command |
| DACTCDRM | Deactivate Cross-Domain Resource Manager |
| DACTCONNIN | Deactivate Connect In |
| DACTLINK | Deactivate Link |
| DACTLU | Deactivate LU |
| DACTPU | Deactivate PU |
| DACTTRACE | Deactivate Trace |
| DACTVR | Deactivate Virtual Route |
| DDDLU RU | Dynamic definition of dependent LUs |
| DELETE | Delete |
| DELETENR | Delete Network Resource |
| DELIVER | Deliver Request |
| DIAL START | Dial Start Request |
| DISCONTACT | Discontact RU |
| DISP STOR | Display Storage |
| DISPLAY | Display Command |
| DLR PURGE | Dump/Load/Restart Purge |
| DSRLST | Cross-Domain Direct Search List |
| DUMP FINAL | Dump Final |
| DUMP INIT | Dump Initial |
| DUMP TEXT | Dump Text |
| DWACT | Dial when active |
| ECHO TEST | ECHO Test |
| ENT SLOWDN | Enter Slowdown |
| ER ACT | Explicit Route Activate |
| ER ACT RPY | Explicit Route Activate Reply |
| ER INOP | Explicit Route Inoperative |
| ER OP | Explicit Route Operative |
| ER TEST | Explicit Route Test |
| ER TESTED | Explicit Route Tested |
| ER TST RPY | Explicit Route Test Reply |
| EXT SLOWDN | Exit Slowdown |
| F ACT GPT | MODIFY TRACE,TYPE=GPT command |
| F ACT NCTR | MODIFY TRACE,TYPE=NETCTLR command |
| F ACT SIT | MODIFY TRACE,TYPE=SIT command |
| F ACT TG | MODIFY TRACE,TYPE=TG |
| F ALSLIST | MODIFY ALSLIST command |
| F ALTRACE | MODIFY TRACE,TYPE=LINE |
| F CDRM | MODIFY CROSS DOMAIN RESOURCE MANAGER command |
| F CHKPT | MODIFY CHECKPOINT command |
| F CHANGE | MODIFY NEGPOLL, or POLL, or SESSLIM |
| F CNOS | MODIFY CHANGE NUMBER OF SESSIONS command |
| F COMPRESS | MODIFY COMPRESS command |
| F DACT GPT | MODIFY NOTRACE,TYPE=GPT command |
| F DACT SIT | MODIFY NOTRACE,TYPE=SIT command |
| F DACT TG | MODIFY NOTRACE,TYPE=TG command |
| F DACTNCTR | MODIFY NOTRACE,TYPE=NETCTLR command |
| F DEFAULTS | MODIFY DEFAULTS command |
| F DEFINE | MODIFY DEFINE command |
| F DIR DEL | MODIFY DIRECTRY,FUNCTION=DELETE command |
| F DIR UPD | MODIFY DIRECTRY,FUNCTION=UPDATE command |
| F DIRECTRY | MODIFY DIRECTORY command |
| F DLTRACE | MODIFY NOTRACE,TYPE=LINE command |
| F DR DEL | MODIFY DR,TYPE=DELETE |
| F DR MOVE | MODIFY DR,TYPE=MOVE |
| F DUMP | MODIFY DUMP command |
| F DUMP CSP | MODIFY DUMP,TYPE=CSP command |
| F DUMP DYN | MODIFY DUMP,TYPE=NCP,OPTION=DYNA command |
| F DUMP MOS | MODIFY DUMP,TYPE=MOSS command |
| F DUMP PGC | MODIFY DUMP,ACTION=PURGE,TYPE=CSP |
| F DUMP PGM | MODIFY DUMP,ACTION=PURGE,TYPE=MOSS |
| F DUMP PGN | MODIFY DUMP,ACTION=PURGE,TYPE=NCP |
| F DUMP STO | MODIFY DUMP, ACTION=STORE |
| F DUMP TRC | MODIFY DUMP,ACTION=TRANSFER,TYPE=CSP |
| F DUMP TRH | MODIFY DUMP,ACTION=TRANSFER,TYPE=NCP (header) |
| F DUMP TRM | MODIFY DUMP,ACTION=TRANSFER,TYPE=NCP (main storage) |
| F DUMP TRN | MODIFY DUMP,ACTION=TRANSFER,TYPE=NCP |
| F ENCR | MODIFY ENCR command |
| F EXIT | MODIFY EXIT command |
| F IMR | MODIFY IMR command |
| F LINEDEF | MODIFY LINEDEF command |
| F LL2 | MODIFY LL2 command |
| F LOAD ADD | MODIFY LOAD ADD command |
| F LOAD CAN | MODIFY LOAD CANCEL command |
| F LOAD PRG | MODIFY LOAD PURGE command |
| F LOAD REN | MODIFY LOAD RENAME command |
| F LOAD REP | MODIFY LOAD REPLACE command |
| F LOAD SET | MODIFY LOAD SET command |
| F NOTNSTAT | MODIFY NO TUNING STATISTICS command |
| F PROFILES | MODIFY PROFILES command |
| F QUERY | MODIFY QUERY command |
| F RESOURCE | MODIFY RESOURCE command |
| F RTP | MODIFY RTP command |
| F TABLE | MODIFY TABLE command |
| F TGP | MODIFY TRANSMISSION GROUP PROFILE command |
| F TNSTAT | MODIFY TUNING STATISTICS command |
| F TOPO | MODIFY TOPOLOGY command |
| F TOPO ID | MODIFY TOPO,ID= command |
| F USERVAR | MODIFY USERVAR command |
| F VTAMOPTS | MODIFY VTAM START OPTIONS command |
| FNA | Free Network Address |
| FORCE DEAC | Force Deactivate |
| FORCE REAC | Force Reactivate |
| FORWARD | Forward Request |
| GDS CDINIT | Cross domain initiate generalized data stream (GDS) variable |
| GDS CP_CAP | Control point capabilities generalized data stream (GDS) variable |
| GDS DELETE | Delete generalized data stream (GDS) variable |
| GDS FIND | Find generalized data stream (GDS) variable |
| GDS FOUND | Found generalized data stream (GDS) variable |
| GDS IOCD | Initiate other cross domain generalized data stream (GDS) variable |
| GDS LOCATE | Locate generalized data stream (GDS) variable |
| GDS NOTIFY | Notify generalized data stream (GDS) variable |
| GDS REGSTR | Register generalized data stream (GDS) variable |
| GDS TDU | Topology database update generalized data stream (GDS) variable |
| HALT CDLNK | Process Cross-Domain Links During HALT |
| HARD INOP | Hard INOP |
| INACT GVBK | VARY INACT,TYPE=GIVEBACK command |
| INACT SON | Deactivate (session outage notification) |
| INIT LOAD | Network Services Initialize Load |
| INIT OTHER | Initiate-Other RU |
| INIT SELF | Initiate-Self RU Format 0 |
| INIT SELF | Initiate-Self RU Format 1 |
| INOP | Inoperative |
| INT SYNCH | TPPOST macro |
| IP DLP | DLUR PATH SWITCH COMP in ISTCPKCB |
| IPL ABORT | Network Services IPL Abort |
| IPL FINAL | IPL Final Request |
| IPL FINAL | Network Control IPL Final |
| IPL FINAL | Network Services IPL Final |
| IPL INIT | IPL Initial Request |
| IPL INIT | Network Control IPL Initial |
| IPL INIT | Network Services IPL Initial |
| IPL TEXT | IPL Text Request |
| IPL TEXT | Network Control IPL Text |
| IPL TEXT | Network Services IPL Text |
| IPS ACC | Adjacent control point contacted interprocess signal (IPS) |
| IPS ACL | Process adjacent cluster interprocess signal (IPS) |
| IPS ACR | Cross-Domain Response AMRU |
| IPS ACU | Adjacent control point updated interprocess signal (IPS) |
| IPS BNP | Border node session reply interprocess signal (IPS) |
| IPS BNQ | Border node session request interprocess signal (IPS) |
| IPS BRI | Broadcast interprocess signal (IPS) |
| IPS CBN | Cache border node information interprocess signal (IPS) |
| IPS CDY | Cross-Domain Resource display |
| IPS CMA | Process COS mapping interprocess signal (IPS) |
| IPS COS | Define Class of Service interprocess signal (IPS) |
| IPS CPS | CP status interprocess signal (IPS) |
| IPS CRQ | CRR request |
| IPS CSH | Cache search interprocess signal (IPS) |
| IPS CSR | Cache search reply interprocess signal (IPS) |
| IPS DIA | Display Adjacent Cluster |
| IPS DLR | DLUR status |
| IPS DQE | Dequeue interprocess signal (IPS) |
| IPS DRV | Data recovered |
| IPS DSI | DISPLAY SRCHINFO interprocess signal (IPS) |
| IPS DSN | Directory server notify |
| IPS ERP | RTP_EXPREC_PURGE |
| IPS FST | Rapid transport protocol (RTP) free storage |
| IPS GCR | Generic cache search reply interprocess signal (IPS) |
| IPS GCS | Generic cache search request interprocess signal (IPS) |
| IPS GUS | Generic cache search update request interprocess signal (IPS) |
| IPS INO | Initiate other interprocess signal (IPS) |
| IPS IOC | Initiate other complete interprocess signal (IPS) |
| IPS MPI | Multinode persistent session HPR connection information |
| IPS MSI | Multinode persistent session information |
| IPS NVP | Nonverify Reply |
| IPS NVR | Nonverify Request |
| IPS OTC | Orderly sessions terminate complete interprocess signal (IPS) |
| IPS OTD | Output topology database update interprocess signal (IPS) |
| IPS OTR | Orderly sessions terminate request interprocess signal (IPS) |
| IPS PCQ | PCID query |
| IPS PCR | PCID query response |
| IPS PLT | Purge locate timer |
| IPS PND | Pending session characteristics interprocess signal (IPS) |
| IPS PNL | Process network node server list interprocess signal (IPS) |
| IPS PRC | Proceed interprocess signal (IPS) |
| IPS PRV | Provide session characteristics interprocess signal (IPS) |
| IPS QED | Queued interprocess signal (IPS) |
| IPS RAC | Resource available complete interprocess signal (IPS) |
| IPS RAL | Rapid transport protocol (RTP) allocation |
| IPS RAT | Rapid transport protocol (RTP) attach |
| IPS RAV | Resource available interprocess signal (IPS) |
| IPS RCS | Rapid transport protocol (RTP) connection setup |
| IPS RDL | Rapid transport protocol (RTP) deallocation |
| IPS RDT | Rapid transport protocol (RTP) deattach |
| IPS RIN | Rapid transport protocol (RTP) inactivation |
| IPS RIO | Rapid transport protocol (RTP) inoperative |
| IPS RMR | Request multiple routes interprocess signal (IPS) |
| IPS RQR | Request route interprocess signal (IPS) |
| IPS RRC | Release request complete interprocess signal (IPS) |
| IPS RRQ | Release request interprocess signal (IPS) |
| IPS RSR | Rapid transport protocol (RTP) route setup request |
| IPS RST | RTP route setup interprocess signal (IPS) |
| IPS RSU | Rapid transport protocol (RTP) route setup |
| IPS RTI | Rapid transport protocol (RTP) TG inoperative |
| IPS SAC | Subarea cleanup interprocess signal (IPS) |
| IPS SCR | Search request |
| IPS SDY | Display sessions |
| IPS SHR | Request single hop route |
| IPS SIR | Session initiate information request |
| IPS SRC | Session request complete interprocess signal (IPS) |
| IPS SRO | CPSVRMGR session outage |
| IPS SRP | Protocol violation detected |
| IPS SRQ | Session request interprocess signal (IPS) |
| IPS SRT | TDU error detected from the DLUR |
| IPS STP | Start TP |
| IPS STR | Start TP reply |
| IPS TGU | TG update |
| IPS TPE | TP ended |
| IPS UPD | Update directory |
| IPS UMR | Update modes interprocess signal (IPS) |
| LCL GAINFO | GetAddrInfo request for local IP address |
| LINKLVL2 | Enter Test Mode (LL2) |
| LL2 | MODIFY LL2 command |
| LOAD REQRD | Network Services Load Required |
| LOAD STAT | Network Services Load Status |
| LOST CTLPT | Lost Control Point |
| LOST PATH | Lost Path |
| LUSTAT | LU Status |
| MODIFY | MODIFY Command |
| MODIFY NOTNSTAT | MODIFY NO TUNING STATISTICS command |
| MODIFY TNSTAT | MODIFY TUNING STATISTICS command |
| MS SCV | Maintenance Services Set Control Vector |
| NTNMON RPY | NCPMON reply RU |
| NCLSA | Network Control Lost Subarea |
| NMVT | Network Management Vector Transport |
| NSLSA | Network Services Lost Subarea |
| NSPE | Network Services Procedure Error |
| NTFY NS(C) | Notify Session End |
| NTFY NS(S) | Notify |
| QC | Quiesce Complete |
| QEC | Quiesce at End of Chain |
| RDELETENR | Request Delete Network Resource |
| REC TEST | Record Test Data |
| REC TRACE | Record Line Trace Data |
| RECFMS | Record Formatted Maintenance Statistics |
| RECMD | Record Measurement Data |
| RECMS | Record Maintenance Statistics |
| RECSTOR | Record Storage |
| RECTR | Record Test Results |
| REL IMMED | VARY REL, TYPE=IMMED command |
| REL GVBK | VARY REL, TYPE=GIVEBACK command |
| RELEASE | VARY REL command |
| RELQ | Release Quiesce |
| REQ ECHO | Request Echo Test |
| REQ RTTEST | Request Route Test |
| REQACTCDRM | Request ACTCDRM |
| REQACTPU | Request Activate PU |
| REQC | Request Contact |
| REQCONT | Request Contact |
| REQDACTPU | Request Deactivate PU |
| REQDISCONT | Request Discontact |
| REQDMP CSP | Request CSP Dump |
| REQDMP MOS | Request MOSS Dump |
| REQDUMP | Request Dump |
| REQDUMP DY | Request Dynamic Dump |
| REQLOAD | Request Load |
| REQMS | Request Maintenance Statistics |
| RESET LU | Reset LU |
| RMPO | Remote Power Off |
| RMT GAINFO | GetAddrInfo request for remote IP address |
| RNAA | Request Network Address Assignment |
| ROUTE_INOP | Network Services Route Inoperative |
| RQR | Request Recovery |
| RSHUTD | Request Shutdown |
| RTR | Ready to Receive |
| SBI | Stop Bracket Initiation |
| SCV | Set Control Vector |
| SDT | Start Data Traffic |
| SELECT VR | Virtual Route Select |
| SESS ENDED | Session Ended |
| SESS START | Session Started |
| SETCV | Set Control Vector |
| SETCV(NAU) | Set Control Vector Network Addressable Unit |
| SETCV(SAR) | Set Control Vector Subarea Routing |
| SETCV(SSS) | Set Control Vector SDLC Secondary Station ID |
| SETCV(STD) | Set Control Vector Set Time And Date |
| SETCV(DPU) | Set Control Vector Dynamic Path Update |
| SETCV(FRS) | Set Control Vector Frame Relay Switching |
| SETTIM CAN | Scheduled Cancel |
| SETUP | Generic Session Initiation |
| SHUTC | Shutdown Complete |
| SHUTDOWN | Shutdown |
| SIGNAL | Signal |
| SOFT INOP | Soft INOP |
| SSCP TKOVR | SSCP Takeover |
| STSN | Set and Test Sequence Number |
| SW TO EP | Switch Line to EP Mode |
| SW TO NCP | Switch Line to NCP Mode |
| SYNTAX CHK | VARY ACT,SCOPE=SYNTAX |
| TERM OTHER | Terminate-Other RU |
| TERM SELF | Terminate-Self Format 0 |
| TIMER REQ | Set Timer Request |
| TR_INQUIRY | Translate Inquiry |
| TR_REPLY | Translate Reply |
| UBIND FAIL | Unbind Failure |
| UNBIND | Unbind RU |
| VARY | VARY command |
| VARY ACQ | VARY ACQ or VARY ACT, ACQ command |
| VARY ACT | VARY ACT command |
| VARY ANS | VARY ANS command |
| VARY AUTOLOG | VARY AUTOLOG command |
| VARY DIAL | VARY DIAL command |
| VARY DRDS | VARY DRDS command |
| VARY HGUP | VARY HANGUP command |
| VARY INACT | VARY INACT or VARY INACT,TYPE=IMMED command |
| VARY INOP | VARY INOP command |
| VARY LOGON | VARY LOGON command |
| VARY NOLOG | VARY NOLOGON command |
| VARY PATH | VARY PATH command |
| VARY REL | VARY REL command |
| V NOLOGON | VARY NOLOGON command |
| XID | Exchange ID |
| XID3 | Exchange ID 3 |