Stand-alone tape environment - Implement
the data class policy specifying EFMT3 or EEFMT3. Also, specify as
appropriate, the interchange recording formats, EFMT2 or EEFMT2. Also,
modify or create ACS routines to associate the tape output functions
with a data class that has the appropriate recording format specified.
If no data class is used, EFMT3 will be the recording technology.
- As appropriate, install the Encryption Key Manager (EKM) and set
up the key store it will use.
- As appropriate, create the data classes or the DD statements (or
use Encryption Key Manager defaults) to specify the key labels and
their encoding mechanism (label or hash).
- As appropriate, for in-band key management, update the IOS PARMLIB
member (IECIOSxx) using the new EKM command. Also create a z/OS UNIX segment for the IOS address space.
- Upgrade 3592 Model J1A and 3592 Model E05 microcode to enable
the drives to recognize and enable the EFMT3 or EEFMT3 formatted cartridges
to be relabelled/reused. Also, ensure that VOLNSNS=YES is in the
DEVSUPxx member of PARMLIB.
- Make the required installation exit changes.
- Make any needed changes to the HCD to define the new devices.
- If more than one recording technology is used for the same device
type, create a unique esoteric for each of the recording technologies.
Use the esoteric unit names in DFSMShsm to direct allocations uniquely
to each group of devices.
- If performance scaling or performance segmentation is used (available
with MEDIA5 and MEDIA9 tape cartridges only), update or create ACS
routines to assign a data class to tape output functions. For example,
for DFSMShsm, you can filter on single file tape data set names used
by DFSMShsm functions. Define the data class with the performance
scaling or performance segmentation attribute.
- Add new device esoteric unit names or generic unit names to STORAGEGROUP
statements in the CBROAMxx member of PARMLIB
for the object storage groups that are to use the new devices. The
esoteric or generic unit name must consist of TS1130 tape drives exclusively
because the EFMT3 and EEFMT3 recording technologies are not compatible
with other devices.
- Install coexistence PTFs as appropriate.
- IPL the system.
|
Required |
|
IBM tape
library environment - Implement the data class policy
specifying EFMT3 or EEFMT3. Also, specify as appropriate, EFMT2 or
EEFMT2 (for media interchange). Also, modify or create ACS routines
to associate the tape output functions with a data class that has
the appropriate recording format specified.
- Because the 3592 Model E06 is only downward read (and not write)
compatible with the EFMT1 format, you must specify the read-compatible
special attribute indicator (in the tape configuration database) or
use LABEL=(,,,IN) on the DD statement of JCL to enable the 3592 Model
E06 drive to be considered eligible for an EFMT1 request.
- As appropriate, install the Encryption Key Manager (EKM) and set
up the key store it will use.
- As appropriate, create the data classes or the DD statements (or
use Encryption Key Manager defaults) to specify the key labels and
their encoding mechanism (label or hash).
- For in-band key management, update (as appropriate) the IOS PARMLIB
member (IECIOSxx) using the EKM command. Also create a z/OS UNIX segment for the IOS address space.
- Upgrade 3592 Model J1A and 3592 Model E05 microcode to enable
the library drives to recognize and enable the EFMT3 or EEFMT3 formatted
cartridges to be relabelled/reused. Also, ensure that VOLNSNS=YES
is in the DEVSUPxx member of PARMLIB.
- Make the required installation exit changes.
- Define or alter existing data class constructs as appropriate,
to specify the EFMT3 or EEFMT3 recording technology, MEDIA5, MEDIA6,
MEDIA7, MEDIA8, MEDIA9, or MEDIA10 media type, and the performance
attributes (performance scaling or performance segmentation available
with MEDIA5 and MEDIA9 tape cartridges only).
- Define or alter existing storage group constructs to include libraries
with the new TS1130 tape drives devices.
- Update ACS routines to direct allocation to the TS1130 tape drives
device as requested.
- Validate and activate any new or modified SMS configuration.
- Make any needed changes to the HCD to define the new devices.
- To define the partitioning category code for MEDIA5 MEDIA6, MEDIA7,
or MEDIA8, MEDIA9, or MEDIA10 tape cartridges, specify the appropriate
parameter of the DEVSUPxx parmlib member.
- IPL the system.
|
Required |
|
OAM object tape environment The
migration steps that you must take in tape environments that use OAM
objects vary depending upon the type of environment that is installed:
- If you install the
new TS1130 tape drives devices in an OAMplex:
- Make the new TS1130 tape drives devices available to all instances
of OAM where the full support software is installed.
- Install coexistence PTFs as appropriate.
- Consider setting DSNWITHSGNAME in the SETOAM statement in the
CBROAMxx PARMLIB member. Review your ACS
routines if appending the storage group name to OAM data set names
(DSNWITHSGNAME).
- If you install the new TS1130 tape drives devices in an IBM tape
library:
- Follow the migration steps listed for an IBM tape library environment.
- Define the new data classes in STORAGEGROUP statements in the
CBROAMxx member of PARMLIB for the object
storage groups that are to use the new devices.
- Make the needed changes to ACS routines for ALLOC, STORE, or CTRANS
environments.
- If you install the new TS1130 tape drives devices in a stand-alone
environment:
- Follow the migration steps listed for a stand-alone environment.
- Add new device esoteric unit names or generic unit names to STORAGEGROUP
statements in the CBROAMxx member of PARMLIB
for the object storage groups that are to use the new EFMT3 or EEFMT3
recording technologies. The esoteric or generic unit name must consist
of TS1130 tape drives exclusively because the EFMT3 and EEFMT3 recording
technologies are not compatible with the other 3592 drives.
- Consider setting DSNWITHSGNAME in the SETOAM statement in the
CBROAMxx PARMLIB member. Review your ACS
routines if appending the storage group name to OAM data set names
(DSNWITHSGNAME).
- Make the needed changes to ACS routines for ALLOC, STORE and CTRANS
environments.
- Define the new data classes in STORAGEGROUP statements in the
CBROAMxx member of PARMLIB for the object storage groups that are
to use the new EFMT3 or EEFMT3 recording technologies.
- In an OAM Object Tape environment, any coexistence or full support
systems must also have the new overflow-related columns added to the
TAPEVOL table in the Optical Configuration Database (OCDB). Only one
system in an OAMplex needs to run CBRSMKBO sample JCL to add the new
TAPEVOL columns, but all systems in the OAMplex need to run CBRPBIND.
Adding the new TAPEVOL columns and running CBRPBIND is needed with
the installation of the new PTFs regardless of whether the new TS1130
tape drives are being used.
|
Required |
z/OS DFSMS OAM Planning, Installation, and Storage Administration Guide for Object Support |
DFSMShsm tape environment DFSMShsm
allows the specification of tape unit names using either generic or
esoteric names. Installations that have a mixture of non-SMS-managed
3590 devices defined under the 3590-1 generic name, need to perform
these steps:
- Define a unique esoteric
for each recording technology.
- Use the SETSYS USERUNITTABLE command to define these esoteric
names to DFSMShsm. This also applies to mixed devices in the 3490
generic. Installations that use SMS-managed tape devices or have a
single 3590-1 recording technology, do not need to define an esoteric
for those devices.
|
Required |
|
Setting up DFSMShsm to use WORM output
tapes for ABACKUP In a SMS tape environment, and optionally
in a non-SMS tape environment, the SMS data class construct can be
used to select WORM tapes for ABACKUP processing. The output data
set prefix specified in the aggregate group definition can be used
by the ACS routines to select a WORM data class. Set up the ACS routine
and the output data set name to uniquely identify the ABARS output
files that must go to WORM tape.
In a non-SMS tape environment,
the default allows tape pooling to determine if ABARS data sets go
to WORM or R/W media. Optionally, if the DEVSUPxx parameter, ENFORCE_DC_MEDIA=ALLMEDIATY or ENFORCE_DC_MEDIA=MEDIA5PLUS,
is used, then the data class must request the appropriate media type
for it to be successfully mounted.
|
Required |
|