MEDIATYPE and RECORDING are optional parameters.
The MEDIATYPE and RECORDING parameters now include
the additional subparameters MEDIA9, MEDIA10, and EFMT2.
- MEDIATYPE{ MEDIA1| MEDIA2| MEDIA3|
MEDIA4| MEDIA5| MEDIA6| MEDIA7| MEDIA8| MEDIA9|
MEDIA10}
- Identifies the media type of the tape volume. If you do not
use this, MEDIATYPE defaults to MEDIA2.
- MEDIA1
- Specifies that the tape volume is Cartridge System Tape.
- MEDIA2
- Specifies that the tape volume is Enhanced Capacity System Tape.
You cannot use this parameter when SPECIALATTRIBUTE is READCOMPATIBLE,
or RECORDING is set to 18TRACK.
- MEDIA3
- Specifies that the tape volume is High Performance Cartridge
Tape.
- MEDIA4
- Specifies that the tape volume is IBM Extended High Performance
Cartridge Tape.
- MEDIA5
- Specifies that the tape volume is IBM TotalStorage Enterprise
Tape Cartridge.
- MEDIA6
- Specifies that the tape volume is IBM TotalStorage Enterprise
WORM Tape Cartridge.
- MEDIA7
- Specifies that the tape volume is IBM TotalStorage Enterprise
Economy Tape Cartridge.
- MEDIA8
- Specifies that the tape volume is IBM TotalStorage Enterprise
Economy WORM Tape Cartridge.
- MEDIA9
- Specifies that the tape volume is IBM TotalStorage Enterprise
Extended Tape Cartridge.
- MEDIA10
- Specifies that the tape volume is IBM TotalStorage Enterprise
Extended WORM Tape Cartridge.
Abbreviation: MTYPE
- [RECORDING{18TRACK|36TRACK|128TRACK|
256TRACK|384TRACK|EFMT1|EFMT2|UNKNOWN}]
- Identifies the tape recording technology. This parameter can
be used only for private tape volumes. The default for scratch tape
volumes is UNKNOWN.
- 18TRACK
- Tape was written on an 18-track device and must be read on an
18-track device or a 36-track device.
- 36TRACK
- Tape was written and must be read on a 36-track device.
- 128TRACK
- Tape was written on a 128-track device and must be read on a
128-track, 256-track, or 384-track device.
- 256TRACK
- Tape was written on a 256-track device and must be read on a
256-track device or a 384-track device.
Note: 128TRACK and
256TRACK are valid only with MEDIATYPE(MEDIA3) or MEDIATYPE(MEDIA4).
- 384TRACK
- Tape was written and must be read on a 384-track device.
Note: 384TRACK is valid only with MEDIATYPE(MEDIA3) or MEDIATYPE(MEDIA4).
- EFMT1
- Tape was written and must be read on an EFMT1 (enterprise format
1) device.
Note: EFMT1 is
valid only with MEDIATYPE(MEDIA5), (MEDIA6), (MEDIA7), and
(MEDIA8).
- EFMT2
- Tape was written and must be read on an EFMT2 (enterprise format
2) device.
Note: EFMT2 is
valid only with MEDIATYPE(MEDIA5), (MEDIA6), (MEDIA7), (MEDIA8),
(MEDIA9), and (MEDIA10).
- UNKNOWN
- Tape recording technology is unknown. This is the default value
for scratch tape volumes.
Abbreviation: REC