Use the CONNECTION DISPLAY command with the SUMmary parameter to view high-level information about multiple existing connections and their usage.
Use the CONNECTION DISPLAY command with the DETail parameter to view all available details about a single connection.
Use the LUName filter with the *LUNSREQ option to see the connections at a LUNR that are waiting for a reply from the LUNS.
Format:
>>- Display TCPIP----,tnproc----+---------+--,CONNection--------> '-,Telnet-' .-,POrt=ALL--------. .-,PROFile=ALL-----. >--+------------------+--+------------------+-------------------> +-,POrt=num--------+ +-,PROFile=prfid---+ +-,POrt=num1..num2-+ +-,PROFile=ACTive--+ '-,POrt=num,qual---' +-,PROFile=CURRent-+ +-,PROFile=Basic---+ '-,PROFile=Secure--' >--+----------------------------------------------------+-------> | .-,DETail--. | +-+-,COnn=connid---------+--+----------+-------------+ | +-,IPPort=ipaddr..port-+ '-,SUMmary-' | | '-,LUName=luname-------' | | .-,NOHname-. | +-+-,LUName=luname*------------------+--+----------+-+ | +-,APPL=applname|applname*---------+ '-,HName---' | | +-,TCPipjobname=tcpip--------------+ | | +-,IPAddr=-+-ipaddr--------------+-+ | | | +-ipv4mask:ipv4subnet-+ | | | | '-ipv6addr/prefixlen--' | | | +-,LUGroup=lugroupname-------------+ | | +-,IPGroup=ipgroupname-------------+ | | '-,PROTOcol=protocol mode----------' | | .-,HName---. | '-+-,HName=*hostname-----+--+----------+-------------' '-,HNGroup=hngroupname-' '-,NOHname-' .-,MAX=100--. >--+-----------+----------------------------------------------->< '-,MAX=nn|*-'
Parameters:
- tnproc
- The member name of the cataloged procedure that is used to start the Telnet address space.
- Telnet
- Legacy parameter that directs the command to the Telnet component when Telnet could run in the TCP/IP stack.
- CONNection
- The connection keyword.
- POrt=ALL|num|num1..num2|num,qual
- Specifies that ALL ports, a specific port (num), port number range (num1..num2), qualified port (num,qual) be displayed. ALL is the default.
- PROFile =ALL|prfid|ACTive|CURRent|Basic|Secure
- The type of profile to display.
- ALL is all profiles, both active and inactive. This is the default.
- prfid is the profile ID.
- ACTive is all the active profiles.
- CURRent is the name of the current profile.
- Basic is the basic profile.
- Secure is the secure profiles.
- COnn=connid
- Displays detailed information about a specific TCP/IP connection ID.
- IPPort=ipaddr..port
- Displays detailed information about a specific IP port and address.
- LUName=luname*
- The name of the LU for which you are searching. The wildcard (*) is allowed only as the last character of the LUName. If no * is indicated, a detailed display will appear.
- SUMmary|DETail
- DETail displays all of the information about the requested connection.
SUMmary displays a subset of the information about the requested connection.
- APPL=applname|applname*
- The application name of the application for which you are searching. The wildcard (*) is allowed only as the last character.
- TCPIPJOBNAME=tcpip
- The TCPIP stack that supports the connection.
- IPAddr=ipaddr|mask:subnet
- The IP address of the connection for which you are searching. The mask:subnet designation is essentially allowing an IP wildcard.
- LUGroup=lugroupname
- The name of the LU group for which you are searching.
- IPGroup=ipgroupname
- The name of the IP group for which you are searching.
- PROTOcol=protocol mode
- The protocol mode for which you are searching. Protocol choices
are:
- BINARY
- LINEMODE
- TN3270
- TN3270E
- TRANSFORM
- HName|NOHname
- The summary display includes client host names when HNAME is specified. The summary display omits client host names when NOHNAME is specified.
- HName=*hostname
- The host name for which you are searching. Single or double asterisks
are permitted as wildcards:
- Use a single asterisk (*) to indicate that any value is acceptable for a particular qualifier in a particular position within the host name. For example, *.*.IBM.COM matches USER1.RALEIGH.IBM.COM, but does not match USER1.TCP.RALEIGH.IBM.COM because this name includes an extra qualifier.
- Use a double asterisk (**) to indicate that any number of qualifiers are acceptable to the left of the asterisks. For example, **.IBM.COM matches USER1.IBM.COM, USER1.RALEIGH.IBM.COM, and USER1.TCP.RALEIGH.IBM.COM.
- HNGroup=hngroupname
- The name of the HN group for which you are searching.
- MAX=100|nn|*
- The number of output lines that are displayed. Valid values are in the range 2–65533. The default value is 100. An asterisk (*) indicates that all output lines are displayed. The command can display a maximum of 65533 output lines (control, label, and data lines). Therefore, if you specify an asterisk (*), a maximum of 65533 output lines is displayed.
Examples:
D TCPIP,TELNET,CONN
(C) EZZ6064I TELNET CONN DISPLAY
(L) ENCR TSP
(L) CONN TYPE IPADDR..PORT LUNAME APPLID PTR LOGMODE
-------- ---- ---------------------- -------- -------- --- --------
0000001C 4S 9.27.11.197..4155 TCPM1002 APPL2 TAE SNX32702
0000001A 4S 9.27.11.197..4154 TCPM1001 APPL2 TAE SNX32702
----- PORT: 23 ACTIVE PROF: CURR CONNS: 2
------------------------------------------------------------
4 OF 4 RECORDS DISPLAYEDThe following example shows information that is related
to AT-TLS.
D TCPIP,TELNET,CONN,CONN=35
EZZ6065I TELNET CONN DISPLAY
CONNECTED: 12:01:49 10/26/2005 STATUS: SESSION ACTIVE
CLIENT IDENTIFIER FOR CONN: 00000035 SECLABEL: **N/A**
CLIENTAUTH USERID: USER60
HOSTNAME: TEST3.IBM.COM
CLNTIP..PORT: ::FFFF:9.16.17.18..2763
DESTIP..PORT: ::FFFF:9.42.43.44..23
LINKNAME: CTCLNK6
PORT: 23 QUAL: NONE
AFFINITY: TCPIP
STATUS: ACTIVE TTLSSECURE ACCESS: SECURE 0005 SSLV3 SAFCHECK
TTLSRule: TTLSTNRULE1
TTLSGrpAction: TTLSTN3270GROUPACTION1
TTLSEnvAction: TTLSTN3270ENVIRONMENTACTION1
TTLSConnAction: TTLSTN3270CONNECTIONACTION1
PROTOCOL: TN3270E LOGMODE: SNX32702 DEVICETYPE: IBM-3278-2-E
OPTIONS: ETET---- 3270E FUNCTIONS: BSR----
NEWENV FUNCTIONS: --
USERIDS RESTRICTAPPL: USER64 EXPRESSLOGON: **N/A**
LUNAME: TCPM1011 TYPE: TERMINAL GENERIC APPL: TSO10003
MAPPING TYPE: CONN IDENTIFIER
OBJECT ITEM SPECIFIC OPTIONS
LUMAP GEN: IG IPGRP1
>LUGRP1 -E--G---
LUGRP2 ----G---
DEFLT APPL: IP ::FFFF:9.16.17.18
TSO --------
USS TABLE: IG IPGRP1
EZBTPUST P-------
LU EXIT
EZBTPUST,>EZBTPSCS PE------
INT TABLE: **N/A**
MONGROUP: IG IPGRP1
MONGRP1
PERIOD: 60 MULT: 5
S/W AVG TOT AVG SUM R/T SSQ R/T ST DEV
======= ======= ======== ============ =======
SNA: 2124 1316 17112 72757524 2046
IP: 0 0 0 0 0
TOTAL: 2124 1316 17112 72757524 2046
COUNT: 4 13
BUCKET1 BUCKET2 BUCKET3 BUCKET4 BUCKET5
50 100 200 500 NO LMT
1 1 0 1 10
PARMS:
PERSIS FUNCTION DIA SECURITY TIMERS MISC
(LMTGCAK) (OPATSKTQSSHRT) (DRF) (PCKLECXN2) (IPKPSTS) (SMLT)
------- ------------ --- --------- ------- ----
******* ***TSBTQ***RT EC* BB**D**** *P**STS *DD* *DEFAULT
------- ------------- DJ- -------*- ------- S--- *TGLOBAL
LM-R-P- -----BT--WH-- --- TSS--F--- ----ST- ---- *TPARMS
LM*R*P* ***TSBTQ*-HRT DJ* TSS*DF*** *P**STS SDD* TP-CURR
PARMSGROUP: IG IPGRP1
------- OP----------- TC- --------2 I------ ---- PRMGRP1
LUMAP-PMAP: ON LUMAP OF LUGRP1
------- ------------ --F --------- ------- -M-- PRMGRP2
LM*R*P* OP*TSBTQ*-HRT TCF TSS*DF**2 IP**STS SMD* <-FINAL
56 OF 56 RECORDS DISPLAYEDUsage:
Only one connection at a time is displayed with parameters CONN=, IPPort=, and LUName= if no wildcard is on LUName.